Linux Samba Share works well on Wi-Fi but performs better over Ethernet.
Linux Samba Share works well on Wi-Fi but performs better over Ethernet.
Hey! I see the issue. Your wireless connection is limited by both your adapter and the network speed, which explains why it's lagging behind. The speeds you're seeing are constrained by the 600mbps (75mb/s) limit on your wireless card. Since you're already using Samba and mapping a network drive, consider optimizing file transfers or switching to a faster wireless adapter if possible. Also, check if your router's wireless settings match the speeds you expect—sometimes firmware updates or channel changes help. Let me know if you want more specific steps!
It might be due to wireless interference or whether you're using 2.4GHz or 5GHz. Opt for 5GHz for optimal performance. The Windows reporting standard depends on the 802.11 version—ac, ac-ni, acg, ae, or ae+. SAMBA handles SMB support on Linux, but its performance isn't fully comparable to native solutions. I haven't tested it over Wi-Fi before.
There are many conflicting details about this topic. Some sources claim 802.11n supports speeds up to 300Mbps, 450Mbps, or even 600Mbps. It's hard to pinpoint the exact standard you're using since results vary. Based on your performance, it seems you're likely getting around 300Mbps (about 37.5MB/s). You might see speeds between 20 and 25MB/s depending on your device. The specific router and Wi-Fi card can also affect this. It's possible you're at your hardware's limit.
Thank you for your messages. Your wireless card is the TP Link Archer T2UH AC600 High Gain and your modem is the Netgear Nighthawk R7000.
Reviewing the detail page shows the maximum speed stays under 54.125MB/s, usually around 45MB/s. It’s advisable to check the router settings since Wi-Fi configurations often limit performance.
I'm really frustrated. The specs said 600mbps, but those sneaky numbers pulled me through. Appreciate your help!