Linux kernel is slow during startup.

FoxX_MC
Member

107

05-10-2022, 12:09 AM

Just installed Linux for the first time and went with PopOS, after trying to do some troubleshooting I didn't end up with much progress. Here's the dmesg [ 0.268252] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.268291] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.268339] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.268382] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.268418] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.268454] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.268489] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.268954] iommu: Default domain type: Translated [ 0.268954] SCSI subsystem initialized [ 0.268954] libata version 3.00 loaded. [ 0.268954] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.268954] pci 0000:09:00.0: vgaarb: bridge control possible [ 0.268954] pci 0000:09:00.0: vgaarb: setting as boot device [ 0.268954] vgaarb: loaded [ 0.268954] ACPI: bus type USB registered [ 0.268954] usbcore: registered new interface driver usbfs [ 0.268954] usbcore: registered new interface driver hub [ 0.268954] usbcore: registered new device driver usb [ 0.268954] pps_core: LinuxPPS API ver. 1 registered [ 0.268954] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.268954] PTP clock support registered [ 0.268954] EDAC MC: Ver: 3.0.0 [ 0.268954] Registered efivars operations [ 0.268954] NetLabel: Initializing [ 0.268954] NetLabel: domain hash size = 128 [ 0.268954] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.268954] NetLabel: unlabeled traffic allowed by default [ 0.268954] PCI: Using ACPI for IRQ routing [ 0.269790] PCI: pci_cache_line_size set to 64 bytes [ 0.269866] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.269867] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 0.269868] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.269869] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.269870] e820: reserve RAM buffer [mem 0xd5b58018-0xd7ffffff] [ 0.269870] e820: reserve RAM buffer [mem 0xd6605000-0xd7ffffff] [ 0.269871] e820: reserve RAM buffer [mem 0xd8e8f000-0xdbffffff] [ 0.269872] e820: reserve RAM buffer [mem 0xda4f6000-0xdbffffff] [ 0.269872] e820: reserve RAM buffer [mem 0xdbe93000-0xdbffffff] [ 0.269873] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.269873] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff] [ 0.269877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.269877] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.273171] clocksource: Switched to clocksource tsc-early [ 0.277560] VFS: Disk quotas dquot_6.6.0 [ 0.277573] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.277639] AppArmor: AppArmor Filesystem Enabled [ 0.277651] pnp: PnP ACPI init [ 0.277720] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.277724] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.277785] system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved [ 0.277788] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.277816] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.277963] system 00:03: [io 0x0280-0x028f] has been reserved [ 0.277964] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.277965] system 00:03: [io 0x02a0-0x02af] has been reserved [ 0.277966] system 00:03: [io 0x02b0-0x02bf] has been reserved [ 0.277968] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.278164] pnp 00:04: [dma 0 disabled] [ 0.278185] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.278375] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.278376] system 00:05: [io 0x040b] has been reserved [ 0.278377] system 00:05: [io 0x04d6] has been reserved [ 0.278378] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.278378] system 00:05: [io 0x0c14] has been reserved [ 0.278379] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.278380] system 00:05: [io 0x0c52] has been reserved [ 0.278381] system 00:05: [io 0x0c6c] has been reserved [ 0.278382] system 00:05: [io 0x0c6f] has been reserved [ 0.278383] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.278384] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.278385] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.278386] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.278387] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.278387] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.278388] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.278389] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.278390] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.278391] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.278392] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.278393] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.278394] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.278395] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.278396] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.278397] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.278398] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.278400] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.278731] pnp: PnP ACPI: found 6 devices [ 0.284122] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.284160] NET: Registered protocol family 2 [ 0.284316] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.285424] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.285503] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.285663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.285727] TCP: Hash tables configured (established 131072 bind 65536) [ 0.285798] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.285838] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.285870] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.285926] NET: Registered protocol family 1 [ 0.285929] NET: Registered protocol family 44 [ 0.285939] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.285951] pci 0000:02:01.0: PCI bridge to [bus 04] [ 0.285962] pci 0000:02:04.0: PCI bridge to [bus 05] [ 0.285973] pci 0000:02:05.0: PCI bridge to [bus 06] [ 0.285984] pci 0000:02:06.0: PCI bridge to [bus 07] [ 0.285986] pci 0000:02:06.0: bridge window [io 0xe000-0xefff] [ 0.285991] pci 0000:02:06.0: bridge window [mem 0xf7600000-0xf76fffff] [ 0.285999] pci 0000:02:07.0: PCI bridge to [bus 08] [ 0.286001] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff] [ 0.286005] pci 0000:02:07.0: bridge window [mem 0xf7500000-0xf75fffff] [ 0.286008] pci 0000:02:07.0: bridge window [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.286013] pci 0000:01:00.2: PCI bridge to [bus 02-08] [ 0.286015] pci 0000:01:00.2: bridge window [io 0xd000-0xefff] [ 0.286019] pci 0000:01:00.2: bridge window [mem 0xf7500000-0xf76fffff] [ 0.286022] pci 0000:01:00.2: bridge window [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.286027] pci 0000:00:01.3: PCI bridge to [bus 01-08] [ 0.286028] pci 0000:00:01.3: bridge window [io 0xd000-0xefff] [ 0.286031] pci 0000:00:01.3: bridge window [mem 0xf7500000-0xf77fffff] [ 0.286033] pci 0000:00:01.3: bridge window [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.286037] pci 0000:00:03.1: PCI bridge to [bus 09] [ 0.286038] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.286040] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] [ 0.286042] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf20fffff 64bit pref] [ 0.286046] pci 0000:00:07.1: PCI bridge to [bus 0a] [ 0.286052] pci 0000:00:08.1: PCI bridge to [bus 0b] [ 0.286055] pci 0000:00:08.1: bridge window [mem 0xf7200000-0xf74fffff] [ 0.286059] pci 0000:00:08.2: PCI bridge to [bus 0c] [ 0.286061] pci 0000:00:08.2: bridge window [mem 0xf7900000-0xf79fffff] [ 0.286065] pci 0000:00:08.3: PCI bridge to [bus 0d] [ 0.286068] pci 0000:00:08.3: bridge window [mem 0xf7800000-0xf78fffff] [ 0.286072] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.286074] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.286074] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.286075] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.286076] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.286077] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.286078] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.286079] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.286080] pci_bus 0000:01: resource 0 [io 0xd000-0xefff] [ 0.286080] pci_bus 0000:01: resource 1 [mem 0xf7500000-0xf77fffff] [ 0.286081] pci_bus 0000:01: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.286082] pci_bus 0000:02: resource 0 [io 0xd000-0xefff] [ 0.286083] pci_bus 0000:02: resource 1 [mem 0xf7500000-0xf76fffff] [ 0.286083] pci_bus 0000:02: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.286084] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.286085] pci_bus 0000:07: resource 1 [mem 0xf7600000-0xf76fffff] [ 0.286086] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.286087] pci_bus 0000:08: resource 1 [mem 0xf7500000-0xf75fffff] [ 0.286088] pci_bus 0000:08: resource 2 [mem 0xf2200000-0xf22fffff 64bit pref] [ 0.286089] pci_bus 0000:09: resource 0 [io 0xf000-0xffff] [ 0.286089] pci_bus 0000:09: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.286090] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf20fffff 64bit pref] [ 0.286091] pci_bus 0000:0b: resource 1 [mem 0xf7200000-0xf74fffff] [ 0.286092] pci_bus 0000:0c: resource 1 [mem 0xf7900000-0xf79fffff] [ 0.286093] pci_bus 0000:0d: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.286296] pci 0000:09:00.1: D0 power state depends on 0000:09:00.0 [ 0.286317] pci 0000:09:00.2: D0 power state depends on 0000:09:00.0 [ 0.286476] pci 0000:09:00.3: D0 power state depends on 0000:09:00.0 [ 0.286604] PCI: CLS 64 bytes, default 64 [ 0.286632] Trying to unpack rootfs image as initramfs... [ 0.428403] Freeing initrd memory: 104848K [ 0.428450] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.428507] pci 0000:00:01.0: Adding to iommu group 0 [ 0.428513] pci 0000:00:01.3: Adding to iommu group 0 [ 0.428522] pci 0000:00:02.0: Adding to iommu group 1 [ 0.428533] pci 0000:00:03.0: Adding to iommu group 2 [ 0.428539] pci 0000:00:03.1: Adding to iommu group 2 [ 0.428547] pci 0000:00:04.0: Adding to iommu group 3 [ 0.428556] pci 0000:00:05.0: Adding to iommu group 4 [ 0.428566] pci 0000:00:07.0: Adding to iommu group 5 [ 0.428573] pci 0000:00:07.1: Adding to iommu group 6 [ 0.428584] pci 0000:00:08.0: Adding to iommu group 7 [ 0.428591] pci 0000:00:08.1: Adding to iommu group 8 [ 0.428598] pci 0000:00:08.2: Adding to iommu group 9 [ 0.428605] pci 0000:00:08.3: Adding to iommu group 10 [ 0.428617] pci 0000:00:14.0: Adding to iommu group 11 [ 0.428623] pci 0000:00:14.3: Adding to iommu group 11 [ 0.428651] pci 0000:00:18.0: Adding to iommu group 12 [ 0.428656] pci 0000:00:18.1: Adding to iommu group 12 [ 0.428662] pci 0000:00:18.2: Adding to iommu group 12 [ 0.428668] pci 0000:00:18.3: Adding to iommu group 12 [ 0.428674] pci 0000:00:18.4: Adding to iommu group 12 [ 0.428680] pci 0000:00:18.5: Adding to iommu group 12 [ 0.428686] pci 0000:00:18.6: Adding to iommu group 12 [ 0.428693] pci 0000:00:18.7: Adding to iommu group 12 [ 0.428696] pci 0000:01:00.0: Adding to iommu group 0 [ 0.428698] pci 0000:01:00.1: Adding to iommu group 0 [ 0.428701] pci 0000:01:00.2: Adding to iommu group 0 [ 0.428704] pci 0000:02:00.0: Adding to iommu group 0 [ 0.428707] pci 0000:02:01.0: Adding to iommu group 0 [ 0.428709] pci 0000:02:04.0: Adding to iommu group 0 [ 0.428712] pci 0000:02:05.0: Adding to iommu group 0 [ 0.428715] pci 0000:02:06.0: Adding to iommu group 0 [ 0.428718] pci 0000:02:07.0: Adding to iommu group 0 [ 0.428721] pci 0000:07:00.0: Adding to iommu group 0 [ 0.428724] pci 0000:08:00.0: Adding to iommu group 0 [ 0.428727] pci 0000:09:00.0: Adding to iommu group 2 [ 0.428730] pci 0000:09:00.1: Adding to iommu group 2 [ 0.428732] pci 0000:09:00.2: Adding to iommu group 2 [ 0.428735] pci 0000:09:00.3: Adding to iommu group 2 [ 0.428743] pci 0000:0a:00.0: Adding to iommu group 13 [ 0.428752] pci 0000:0b:00.0: Adding to iommu group 14 [ 0.428760] pci 0000:0b:00.1: Adding to iommu group 15 [ 0.428768] pci 0000:0b:00.3: Adding to iommu group 16 [ 0.428777] pci 0000:0b:00.4: Adding to iommu group 17 [ 0.428784] pci 0000:0c:00.0: Adding to iommu group 18 [ 0.428791] pci 0000:0d:00.0: Adding to iommu group 19 [ 0.431629] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.431633] pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade): [ 0.431634] PPR X2APIC NX GT IA GA PC GA_vAPIC [ 0.431637] AMD-Vi: Interrupt remapping enabled [ 0.431638] AMD-Vi: Virtual APIC enabled [ 0.431638] AMD-Vi: X2APIC enabled [ 0.431736] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.432277] amd_uncore: 4 amd_df counters detected [ 0.432282] amd_uncore: 6 amd_l3 counters detected [ 0.432428] LVT offset 0 assigned for vector 0x400 [ 0.432486] perf: AMD IBS detected (0x000003ff) [ 0.432490] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.432526] check: Scanning for low memory corruption every 60 seconds [ 0.432888] Initialise system trusted keyrings [ 0.432901] Key type blacklist registered [ 0.432931] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.433531] zbud: loaded [ 0.433699] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.433783] fuse: init (API version 7.33) [ 0.433881] integrity: Platform Keyring initialized [ 0.436231] Key type asymmetric registered [ 0.436232] Asymmetric key parser 'x509' registered [ 0.436239] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.436263] io scheduler mq-deadline registered [ 0.436841] pcieport 0000:00:01.3: PME: Signaling with IRQ 26 [ 0.436907] pcieport 0000:00:01.3: AER: enabled with IRQ 26 [ 0.437012] pcieport 0000:00:03.1: PME: Signaling with IRQ 27 [ 0.437058] pcieport 0000:00:03.1: AER: enabled with IRQ 27 [ 0.437212] pcieport 0000:00:07.1: PME: Signaling with IRQ 29 [ 0.437260] pcieport 0000:00:07.1: AER: enabled with IRQ 29 [ 0.437346] pcieport 0000:00:08.1: PME: Signaling with IRQ 30 [ 0.437396] pcieport 0000:00:08.1: AER: enabled with IRQ 30 [ 0.437509] pcieport 0000:00:08.2: PME: Signaling with IRQ 31 [ 0.437551] pcieport 0000:00:08.2: AER: enabled with IRQ 31 [ 0.437661] pcieport 0000:00:08.3: PME: Signaling with IRQ 32 [ 0.437700] pcieport 0000:00:08.3: AER: enabled with IRQ 32 [ 0.438616] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.438646] efifb: probing for efifb [ 0.438655] efifb: showing boot graphics [ 0.443540] efifb: framebuffer at 0xe0000000, using 23040k, total 23040k [ 0.443541] efifb: mode is 2560x1440x32, linelength=16384, pages=1 [ 0.443542] efifb: scrolling: redraw [ 0.443542] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.443577] fbcon: Deferring console take-over [ 0.443577] fb0: EFI VGA frame buffer device [ 0.443646] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.443659] ACPI: Power Button [PWRB] [ 0.443679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.443698] ACPI: Power Button [PWRF] [ 0.446856] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1182 [ 0.446863] Monitor-Mwait will be used to enter C-1 state [ 0.446865] ACPI: \_PR_.C000: Found 2 idle states [ 0.446925] ACPI: \_PR_.C002: Found 2 idle states [ 0.446979] ACPI: \_PR_.C004: Found 2 idle states [ 0.447043] ACPI: \_PR_.C006: Found 2 idle states [ 0.447128] ACPI: \_PR_.C008: Found 2 idle states [ 0.447212] ACPI: \_PR_.C00A: Found 2 idle states [ 0.447267] ACPI: \_PR_.C001: Found 2 idle states [ 0.447322] ACPI: \_PR_.C003: Found 2 idle states [ 0.447382] ACPI: \_PR_.C005: Found 2 idle states [ 0.447461] ACPI: \_PR_.C007: Found 2 idle states [ 0.447549] ACPI: \_PR_.C009: Found 2 idle states [ 0.447628] ACPI: \_PR_.C00B: Found 2 idle states [ 0.447795] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.468333] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.469445] Linux agpgart interface v0.103 [ 0.529035] loop: module loaded [ 0.529186] libphy: Fixed MDIO Bus: probed [ 0.529187] tun: Universal TUN/TAP device driver, 1.6 [ 0.529217] PPP generic driver version 2.4.2 [ 0.529247] VFIO - User Level meta-driver version: 0.3 [ 0.529279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.529281] ehci-pci: EHCI PCI platform driver [ 0.529286] ehci-platform: EHCI generic platform driver [ 0.529290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.529291] ohci-pci: OHCI PCI platform driver [ 0.529296] ohci-platform: OHCI generic platform driver [ 0.529299] uhci_hcd: USB Universal Host Controller Interface driver [ 0.529317] i8042: PNP: No PS/2 controller found. [ 0.529340] mousedev: PS/2 mouse device common for all mice [ 0.529394] rtc_cmos 00:02: RTC can wake from S4 [ 0.529560] rtc_cmos 00:02: registered as rtc0 [ 0.529604] rtc_cmos 00:02: setting system clock to 2021-08-01T05:11:56 UTC (1627794716) [ 0.529612] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.529616] i2c /dev entries driver [ 0.529633] device-mapper: uevent: version 1.0.3 [ 0.529659] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected] [ 0.529669] platform eisa.0: Probing EISA bus 0 [ 0.529670] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.529671] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.529672] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.529672] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.529673] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.529674] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.529674] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.529675] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.529676] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.529676] platform eisa.0: EISA: Detected 0 cards [ 0.529764] ledtrig-cpu: registered to indicate activity on CPUs [ 0.529766] EFI Variables Facility v0.08 2004-May-17 [ 0.542220] drop_monitor: Initializing network drop monitor service [ 0.542306] NET: Registered protocol family 10 [ 0.544766] Segment Routing with IPv6 [ 0.544776] NET: Registered protocol family 17 [ 0.544803] Key type dns_resolver registered [ 0.545293] microcode: CPU0: patch_level=0x08701021 [ 0.545298] microcode: CPU1: patch_level=0x08701021 [ 0.545303] microcode: CPU2: patch_level=0x08701021 [ 0.545308] microcode: CPU3: patch_level=0x08701021 [ 0.545314] microcode: CPU4: patch_level=0x08701021 [ 0.545320] microcode: CPU5: patch_level=0x08701021 [ 0.545323] microcode: CPU6: patch_level=0x08701021 [ 0.545328] microcode: CPU7: patch_level=0x08701021 [ 0.545330] microcode: CPU8: patch_level=0x08701021 [ 0.545335] microcode: CPU9: patch_level=0x08701021 [ 0.545340] microcode: CPU10: patch_level=0x08701021 [ 0.545347] microcode: CPU11: patch_level=0x08701021 [ 0.545365] microcode: Microcode Update Driver: v2.2. [ 0.545457] resctrl: L3 allocation detected [ 0.545458] resctrl: L3DATA allocation detected [ 0.545459] resctrl: L3CODE allocation detected [ 0.545459] resctrl: MB allocation detected [ 0.545459] resctrl: L3 monitoring detected [ 0.545461] IPI shorthand broadcast: enabled [ 0.545467] sched_clock: Marking stable (545189440, 263128)->(546978484, -1525916) [ 0.545533] registered taskstats version 1 [ 0.545541] Loading compiled-in X.509 certificates [ 0.545929] Loaded X.509 cert 'Build time autogenerated kernel key: abdbbc61580c08d661c598b1c838994880185df1' [ 0.546263] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.546590] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.547280] zswap: loaded using pool lzo/zbud [ 0.547368] Key type ._fscrypt registered [ 0.547368] Key type .fscrypt registered [ 0.547369] Key type fscrypt-provisioning registered [ 0.547394] Key type trusted registered [ 0.548462] Key type encrypted registered [ 0.548464] AppArmor: AppArmor sha1 policy hashing enabled [ 0.548911] integrity: Loading X.509 certificate: UEFI:db [ 0.548926] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.548927] integrity: Loading X.509 certificate: UEFI:db [ 0.548937] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.549655] ima: Allocated hash algorithm: sha1 [ 0.657221] ima: No architecture policies found [ 0.657227] evm: Initialising EVM extended attributes: [ 0.657228] evm: security.selinux [ 0.657228] evm: security.SMACK64 [ 0.657229] evm: security.SMACK64EXEC [ 0.657229] evm: security.SMACK64TRANSMUTE [ 0.657229] evm: security.SMACK64MMAP [ 0.657230] evm: security.apparmor [ 0.657230] evm: security.ima [ 0.657230] evm: security.capability [ 0.657231] evm: HMAC attrs: 0x1 [ 0.657479] PM: Magic number: 1:231:162 [ 0.657518] acpi device:29: hash matches [ 0.657759] acpi_cpufreq: overriding BIOS provided _PSD data [ 0.705234] RAS: Correctable Errors collector initialized. [ 0.706365] Freeing unused decrypted memory: 2036K [ 0.706640] Freeing unused kernel image (initmem) memory: 2692K [ 0.713204] Write protecting the kernel read-only data: 28672k [ 0.713572] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.713638] Freeing unused kernel image (rodata/data gap) memory: 84K [ 0.738201] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.738204] Run /init as init process [ 0.738204] with arguments: [ 0.738205] /init [ 0.738205] splash [ 0.738206] with environment: [ 0.738206] HOME=/ [ 0.738207] TERM=linux [ 0.786160] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 0.786166] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 0.786399] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 0.787237] ahci 0000:01:00.1: version 3.0 [ 0.787249] ahci 0000:01:00.1: enabling device (0000 -> 0002) [ 0.787765] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled [ 0.787807] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 0.787810] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 0.788267] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.788272] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.788384] cryptd: max_cpu_qlen set to 1000 [ 0.791359] scsi host0: ahci [ 0.791431] AVX2 version of gcm_enc/dec engaged. [ 0.791432] AES CTR mode by8 optimization enabled [ 0.791450] scsi host1: ahci [ 0.792442] scsi host2: ahci [ 0.792613] scsi host3: ahci [ 0.792705] scsi host4: ahci [ 0.792791] scsi host5: ahci [ 0.792893] scsi host6: ahci [ 0.793003] scsi host7: ahci [ 0.793041] ata1: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780100 irq 42 [ 0.793044] ata2: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780180 irq 42 [ 0.793046] ata3: DUMMY [ 0.793047] ata4: DUMMY [ 0.793049] ata5: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780300 irq 42 [ 0.793051] ata6: SATA max UDMA/133 abar m131072@0xf7780000 port 0xf7780380 irq 42 [ 0.793052] ata7: DUMMY [ 0.793053] ata8: DUMMY [ 0.793247] ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled [ 0.793294] ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.793296] ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 0.793472] scsi host8: ahci [ 0.793570] scsi host9: ahci [ 0.793605] ata9: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600100 irq 43 [ 0.793608] ata10: SATA max UDMA/133 abar m512@0xf7600000 port 0xf7600180 irq 43 [ 0.793633] ahci 0000:0c:00.0: enabling device (0000 -> 0002) [ 0.793734] ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.793736] ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.797181] scsi host10: ahci [ 0.797274] ata11: SATA max UDMA/133 abar m2048@0xf7900000 port 0xf7900100 irq 45 [ 0.797292] ahci 0000:0d:00.0: enabling device (0000 -> 0002) [ 0.797392] ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 0.797395] ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.797521] scsi host11: ahci [ 0.797555] ata12: SATA max UDMA/133 abar m2048@0xf7800000 port 0xf7800100 irq 47 [ 0.810663] libphy: r8169: probed [ 0.810803] r8169 0000:08:00.0 eth0: RTL8168g/8111g, 70:85:c2:77:16:94, XID 4c0, IRQ 48 [ 0.810806] r8169 0000:08:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 0.811658] r8169 0000:08:00.0 enp8s0: renamed from eth0 [ 0.843687] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010048000410 [ 0.843834] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11 [ 0.843836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.843837] usb usb1: Product: xHCI Host Controller [ 0.843837] usb usb1: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd [ 0.843838] usb usb1: SerialNumber: 0000:01:00.0 [ 0.843907] hub 1-0:1.0: USB hub found [ 0.843920] hub 1-0:1.0: 10 ports detected [ 0.844141] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.844143] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.844145] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.844170] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.844180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11 [ 0.844181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.844182] usb usb2: Product: xHCI Host Controller [ 0.844183] usb usb2: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd [ 0.844183] usb usb2: SerialNumber: 0000:01:00.0 [ 0.844228] hub 2-0:1.0: USB hub found [ 0.844234] hub 2-0:1.0: 4 ports detected [ 0.844282] usb: port power management may be unreliable [ 0.844427] xhci_hcd 0000:09:00.2: xHCI Host Controller [ 0.844429] xhci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 3 [ 0.845021] xhci_hcd 0000:09:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010 [ 0.845121] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11 [ 0.845123] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.845124] usb usb3: Product: xHCI Host Controller [ 0.845124] usb usb3: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd [ 0.845125] usb usb3: SerialNumber: 0000:09:00.2 [ 0.845165] hub 3-0:1.0: USB hub found [ 0.845170] hub 3-0:1.0: 2 ports detected [ 0.845247] xhci_hcd 0000:09:00.2: xHCI Host Controller [ 0.845249] xhci_hcd 0000:09:00.2: new USB bus registered, assigned bus number 4 [ 0.845250] xhci_hcd 0000:09:00.2: Host supports USB 3.1 Enhanced SuperSpeed [ 0.845267] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.845276] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11 [ 0.845277] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.845278] usb usb4: Product: xHCI Host Controller [ 0.845279] usb usb4: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd [ 0.845279] usb usb4: SerialNumber: 0000:09:00.2 [ 0.845315] hub 4-0:1.0: USB hub found [ 0.845322] hub 4-0:1.0: 4 ports detected [ 0.845448] xhci_hcd 0000:0b:00.3: xHCI Host Controller [ 0.845450] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 5 [ 0.845553] xhci_hcd 0000:0b:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 0.845804] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11 [ 0.845805] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.845806] usb usb5: Product: xHCI Host Controller [ 0.845807] usb usb5: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd [ 0.845807] usb usb5: SerialNumber: 0000:0b:00.3 [ 0.845852] hub 5-0:1.0: USB hub found [ 0.845857] hub 5-0:1.0: 4 ports detected [ 0.845961] xhci_hcd 0000:0b:00.3: xHCI Host Controller [ 0.845963] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 6 [ 0.845964] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 0.845986] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.845996] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11 [ 0.845997] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.845998] usb usb6: Product: xHCI Host Controller [ 0.845999] usb usb6: Manufacturer: Linux 5.11.0-7620-generic xhci-hcd [ 0.845999] usb usb6: SerialNumber: 0000:0b:00.3 [ 0.846042] hub 6-0:1.0: USB hub found [ 0.846048] hub 6-0:1.0: 4 ports detected [ 1.110958] ata12: SATA link down (SStatus 0 SControl 300) [ 1.112727] ata11: SATA link down (SStatus 0 SControl 300) [ 1.180139] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ 1.180141] usb 1-6: new full-speed USB device number 2 using xhci_hcd [ 1.256148] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.256160] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.256855] ata9.00: ATA-10: ADATA SU800, R0126A, max UDMA/133 [ 1.256856] ata9.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.257265] ata9.00: configured for UDMA/133 [ 1.293436] ata1.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133 [ 1.293438] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.339834] usb 5-1: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=10.80 [ 1.339836] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.339837] usb 5-1: Product: USB2.0 Hub [ 1.339838] usb 5-1: Manufacturer: VIA Labs, Inc. [ 1.353274] ata1.00: configured for UDMA/133 [ 1.353362] scsi 0:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5 [ 1.353465] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.353476] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.353478] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.353482] sd 0:0:0:0: [sda] Write Protect is off [ 1.353483] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.353488] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.390225] hub 5-1:1.0: USB hub found [ 1.390582] hub 5-1:1.0: 4 ports detected [ 1.425018] sda: sda2 [ 1.425242] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.448139] tsc: Refined TSC clocksource calibration: 4192.124 MHz [ 1.448145] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c6d51807ee, max_idle_ns: 440795380511 ns [ 1.448172] clocksource: Switched to clocksource tsc [ 1.502822] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.504946] usb 1-6: New USB device found, idVendor=2516, idProduct=0051, bcdDevice=11.01 [ 1.504949] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 1.504950] usb 1-6: Product: AMD SR4 lamplight Control [ 1.504951] usb 1-6: Manufacturer: Cooler Master Technology Inc. [ 1.521154] hid: raw HID events driver © Jiri Kosina [ 1.536711] usbcore: registered new interface driver usbhid [ 1.536712] usbhid: USB HID core driver [ 1.537707] input: Cooler Master Technology Inc. AMD SR4 lamplight Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.0/0003:2516:0051.0001/input/input2 [ 1.596178] hid-generic 0003:2516:0051.0001: input,hidraw0: USB HID v1.11 Keyboard [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:01:00.0-6/input0 [ 1.596238] hid-generic 0003:2516:0051.0002: hiddev0,hidraw1: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:01:00.0-6/input1 [ 1.596282] input: Cooler Master Technology Inc. AMD SR4 lamplight Control System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.2/0003:2516:0051.0003/input/input3 [ 1.623037] usb 6-1: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=10.85 [ 1.623039] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.623040] usb 6-1: Product: USB3.0 Hub [ 1.623041] usb 6-1: Manufacturer: VIA Labs, Inc. [ 1.646111] hub 6-1:1.0: USB hub found [ 1.648445] hub 6-1:1.0: 4 ports detected [ 1.656176] input: Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-6/1-6:1.2/0003:2516:0051.0003/input/input4 [ 1.656210] hid-generic 0003:2516:0051.0003: input,hidraw2: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:01:00.0-6/input2 [ 1.666256] ata2: SATA link down (SStatus 0 SControl 300) [ 1.736140] usb 5-4: new full-speed USB device number 3 using xhci_hcd [ 1.978522] ata5: SATA link down (SStatus 0 SControl 300) [ 2.452147] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.453086] ata6.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133 [ 2.453088] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.454060] ata6.00: configured for UDMA/133 [ 2.454151] scsi 5:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5 [ 2.454240] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 2.454266] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.454268] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 2.454274] sd 5:0:0:0: [sdb] Write Protect is off [ 2.454275] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.454284] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.454356] scsi 8:0:0:0: Direct-Access ATA ADATA SU800 6A PQ: 0 ANSI: 5 [ 2.454440] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 2.454462] sd 8:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.454467] sd 8:0:0:0: [sdc] Write Protect is off [ 2.454468] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.454475] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.479268] sdc: sdc1 sdc2 sdc3 sdc4 [ 2.479574] sd 8:0:0:0: [sdc] Attached SCSI disk [ 2.499368] sdb: sdb1 [ 2.499575] sd 5:0:0:0: [sdb] Attached SCSI disk [ 2.766558] ata10: SATA link down (SStatus 0 SControl 300) [ 7.116990] usb 5-4: New USB device found, idVendor=258a, idProduct=0036, bcdDevice= 1.00 [ 7.116993] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.116994] usb 5-4: Product: Wired Gaming Mouse [ 7.116995] usb 5-4: Manufacturer: SINOWEALTH [ 7.129078] input: SINOWEALTH Wired Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:258A:0036.0004/input/input5 [ 7.129146] hid-generic 0003:258A:0036.0004: input,hidraw3: USB HID v1.11 Mouse [SINOWEALTH Wired Gaming Mouse] on usb-0000:0b:00.3-4/input0 [ 7.135137] input: SINOWEALTH Wired Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:258A:0036.0005/input/input6 [ 7.192225] hid-generic 0003:258A:0036.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [SINOWEALTH Wired Gaming Mouse] on usb-0000:0b:00.3-4/input1 [ 7.224258] input: Glorious Model O as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.0/0003:258A:0036.0004/input/input9 [ 7.224318] glorious 0003:258A:0036.0004: input,hidraw3: USB HID v1.11 Mouse [Glorious Model O] on usb-0000:0b:00.3-4/input0 [ 7.232137] usb 5-1.1: new high-speed USB device number 4 using xhci_hcd [ 7.272227] glorious 0003:258A:0036.0005: patching Glorious Model O consumer control report descriptor [ 7.272331] input: Glorious Model O Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:258A:0036.0005/input/input10 [ 7.332203] input: Glorious Model O Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4:1.1/0003:258A:0036.0005/input/input11 [ 7.332249] glorious 0003:258A:0036.0005: input,hiddev1,hidraw4: USB HID v1.11 Keyboard [Glorious Model O] on usb-0000:0b:00.3-4/input1 [ 7.888330] usb 5-1.1: New USB device found, idVendor=046d, idProduct=08b6, bcdDevice= 0.21 [ 7.888333] usb 5-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 7.888335] usb 5-1.1: Product: Logi Webcam C920e [ 7.888336] usb 5-1.1: SerialNumber: 168135BF [ 8.220139] usb 5-1.2: new full-speed USB device number 5 using xhci_hcd [ 8.391979] usb 5-1.2: New USB device found, idVendor=04d9, idProduct=0356, bcdDevice= 1.10 [ 8.391982] usb 5-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 8.391983] usb 5-1.2: Product: Ducky Keyboard [ 8.391984] usb 5-1.2: Manufacturer: DuckyChannel International Co., Ltd. [ 8.532062] input: DuckyChannel International Co., Ltd. Ducky Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.0/0003:04D9:0356.0006/input/input13 [ 8.588192] hid-generic 0003:04D9:0356.0006: input,hidraw5: USB HID v1.11 Keyboard [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input0 [ 8.594055] hid-generic 0003:04D9:0356.0007: hiddev2,hidraw6: USB HID v1.11 Device [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input1 [ 8.598100] input: DuckyChannel International Co., Ltd. Ducky Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.0008/input/input14 [ 8.656187] input: DuckyChannel International Co., Ltd. Ducky Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.0008/input/input15 [ 8.656216] input: DuckyChannel International Co., Ltd. Ducky Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.0008/input/input16 [ 8.656256] input: DuckyChannel International Co., Ltd. Ducky Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.0008/input/input17 [ 8.656288] hid-generic 0003:04D9:0356.0008: input,hidraw7: USB HID v1.11 Mouse [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input2 [ 33.107221] usb 5-1.2: USB disconnect, device number 5 [ 34.336172] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 34.337328] ata9.00: configured for UDMA/133 [ 64.580154] ata9.00: exception Emask 0x0 SAct 0x324 SErr 0x2080000 action 0x6 frozen [ 64.580157] ata9: SError: { 10B8B UnrecFIS } [ 64.580159] ata9.00: failed command: READ FPDMA QUEUED [ 64.580160] ata9.00: cmd 60/08:10:b0:b1:e7/00:00:0e:00:00/40 tag 2 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 64.580164] ata9.00: status: { DRDY } [ 64.580165] ata9.00: failed command: READ FPDMA QUEUED [ 64.580166] ata9.00: cmd 60/08:28:80:10:00/00:00:00:00:00/40 tag 5 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 64.580168] ata9.00: status: { DRDY } [ 64.580169] ata9.00: failed command: READ FPDMA QUEUED [ 64.580170] ata9.00: cmd 60/08:40:08:a0:8f/00:00:00:00:00/40 tag 8 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 64.580173] ata9.00: status: { DRDY } [ 64.580174] ata9.00: failed command: READ FPDMA QUEUED [ 64.580174] ata9.00: cmd 60/07:48:f8:9f:8f/00:00:00:00:00/40 tag 9 ncq dma 3584 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 64.580177] ata9.00: status: { DRDY } [ 64.580178] ata9: hard resetting link [ 65.056173] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 65.057328] ata9.00: configured for UDMA/133 [ 65.057331] ata9.00: device reported invalid CHS sector 0 [ 65.057332] ata9.00: device reported invalid CHS sector 0 [ 65.057333] ata9.00: device reported invalid CHS sector 0 [ 65.057334] ata9.00: device reported invalid CHS sector 0 [ 65.057337] sd 8:0:0:0: [sdc] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=30s [ 65.057339] sd 8:0:0:0: [sdc] tag#2 Sense Key : Illegal Request [current] [ 65.057340] sd 8:0:0:0: [sdc] tag#2 Add. Sense: Unaligned write command [ 65.057342] sd 8:0:0:0: [sdc] tag#2 CDB: Read(10) 28 00 0e e7 b1 b0 00 00 08 00 [ 65.057342] blk_update_request: I/O error, dev sdc, sector 250065328 op 0x0 Sad

READ) flags 0x80700 phys_seg 1 prio class 0 [ 65.057349] sd 8:0:0:0: [sdc] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=30s [ 65.057350] sd 8:0:0:0: [sdc] tag#5 Sense Key : Illegal Request [current] [ 65.057351] sd 8:0:0:0: [sdc] tag#5 Add. Sense: Unaligned write command [ 65.057352] sd 8:0:0:0: [sdc] tag#5 CDB: Read(10) 28 00 00 00 10 80 00 00 08 00 [ 65.057352] blk_update_request: I/O error, dev sdc, sector 4224 op 0x0 Sad

READ) flags 0x80700 phys_seg 1 prio class 0 [ 65.057356] sd 8:0:0:0: [sdc] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=30s [ 65.057357] sd 8:0:0:0: [sdc] tag#8 Sense Key : Illegal Request [current] [ 65.057358] sd 8:0:0:0: [sdc] tag#8 Add. Sense: Unaligned write command [ 65.057359] sd 8:0:0:0: [sdc] tag#8 CDB: Read(10) 28 00 00 8f a0 08 00 00 08 00 [ 65.057359] blk_update_request: I/O error, dev sdc, sector 9412616 op 0x0 Sad

READ) flags 0x80700 phys_seg 1 prio class 0 [ 65.057362] sd 8:0:0:0: [sdc] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=30s [ 65.057363] sd 8:0:0:0: [sdc] tag#9 Sense Key : Illegal Request [current] [ 65.057364] sd 8:0:0:0: [sdc] tag#9 Add. Sense: Unaligned write command [ 65.057365] sd 8:0:0:0: [sdc] tag#9 CDB: Read(10) 28 00 00 8f 9f f8 00 00 07 00 [ 65.057365] blk_update_request: I/O error, dev sdc, sector 9412600 op 0x0 Sad

READ) flags 0x80700 phys_seg 1 prio class 0 [ 65.057368] ata9: EH complete [ 66.154916] system76_acpi: loading out-of-tree module taints kernel. [ 66.154932] system76_acpi: module verification failed: signature and/or required key missing - tainting kernel [ 66.156251] system76: Model does not utilize this driver [ 66.217147] usbcore: registered new interface driver system76-io [ 66.292139] raid6: avx2x4 gen() 33965 MB/s [ 66.360147] raid6: avx2x4 xor() 10703 MB/s [ 66.428147] raid6: avx2x2 gen() 35626 MB/s [ 66.496149] raid6: avx2x2 xor() 23538 MB/s [ 66.564146] raid6: avx2x1 gen() 28393 MB/s [ 66.632148] raid6: avx2x1 xor() 19881 MB/s [ 66.700147] raid6: sse2x4 gen() 17430 MB/s [ 66.768148] raid6: sse2x4 xor() 9098 MB/s [ 66.836150] raid6: sse2x2 gen() 19483 MB/s [ 66.904148] raid6: sse2x2 xor() 12260 MB/s [ 66.972147] raid6: sse2x1 gen() 14737 MB/s [ 67.040147] raid6: sse2x1 xor() 10292 MB/s [ 67.040148] raid6: using algorithm avx2x2 gen() 35626 MB/s [ 67.040148] raid6: .... xor() 23538 MB/s, rmw enabled [ 67.040149] raid6: using avx2x2 recovery algorithm [ 67.040759] xor: automatically using best checksumming function avx [ 67.041246] async_tx: api initialized (async) [ 67.148996] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 67.299243] systemd[1]: Inserted module 'autofs4' [ 67.338928] systemd[1]: Successfully credited entropy passed from boot loader. [ 67.342314] systemd[1]: systemd 247.3-3ubuntu3.4pop0~1626806865~21.04~19f7a6d running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 67.364172] systemd[1]: Detected architecture x86-64. [ 67.400765] systemd[1]: Set hostname to <pop-os>. [ 67.604509] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 67.626715] systemd[1]: Queued start job for default target Graphical Interface. [ 67.632728] systemd[1]: Created slice system-modprobe.slice. [ 67.632887] systemd[1]: Created slice Cryptsetup Units Slice. [ 67.633014] systemd[1]: Created slice User and Session Slice. [ 67.633045] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 67.633118] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 67.633162] systemd[1]: Reached target User and Group Name Lookups. [ 67.633173] systemd[1]: Reached target Remote File Systems. [ 67.633179] systemd[1]: Reached target Slices. [ 67.633223] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 67.633378] systemd[1]: Listening on LVM2 poll daemon socket. [ 67.633415] systemd[1]: Listening on Syslog Socket. [ 67.633439] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 67.633519] systemd[1]: Listening on Journal Audit Socket. [ 67.633555] systemd[1]: Listening on Journal Socket (/dev/log). [ 67.633598] systemd[1]: Listening on Journal Socket. [ 67.633765] systemd[1]: Listening on udev Control Socket. [ 67.633807] systemd[1]: Listening on udev Kernel Socket. [ 67.634270] systemd[1]: Mounting Huge Pages File System... [ 67.634685] systemd[1]: Mounting POSIX Message Queue File System... [ 67.635155] systemd[1]: Mounting Kernel Debug File System... [ 67.635597] systemd[1]: Mounting Kernel Trace File System... [ 67.636386] systemd[1]: Starting Journal Service... [ 67.636493] systemd[1]: Finished Availability of block devices. [ 67.637115] systemd[1]: Starting Set the console keyboard layout... [ 67.637628] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 67.638127] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 67.638526] systemd[1]: Starting Load Kernel Module configfs... [ 67.638926] systemd[1]: Starting Load Kernel Module drm... [ 67.639439] systemd[1]: Starting Load Kernel Module fuse... [ 67.640004] systemd[1]: Started Nameserver information manager. [ 67.640073] systemd[1]: Reached target Network (Pre). [ 67.641963] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 67.643976] systemd[1]: Starting Load Kernel Modules... [ 67.644423] systemd[1]: Starting Remount Root and Kernel File Systems... [ 67.644837] systemd[1]: Starting Coldplug All udev Devices... [ 67.645275] systemd[1]: Starting Uncomplicated firewall... [ 67.646186] systemd[1]: Mounted Huge Pages File System. [ 67.646247] systemd[1]: Mounted POSIX Message Queue File System. [ 67.646296] systemd[1]: Mounted Kernel Debug File System. [ 67.646342] systemd[1]: Mounted Kernel Trace File System. [ 67.646580] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 67.646701] systemd[1]: [email protected]: Succeeded. [ 67.646853] systemd[1]: Finished Load Kernel Module configfs. [ 67.646941] systemd[1]: [email protected]: Succeeded. [ 67.647086] systemd[1]: Finished Load Kernel Module fuse. [ 67.647716] systemd[1]: Mounting FUSE Control File System... [ 67.648185] systemd[1]: Mounting Kernel Configuration File System... [ 67.649132] systemd[1]: Mounted FUSE Control File System. [ 67.649187] systemd[1]: Mounted Kernel Configuration File System. [ 67.652152] EXT4-fs (sdc3): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 67.652723] systemd[1]: [email protected]: Succeeded. [ 67.652878] systemd[1]: Finished Load Kernel Module drm. [ 67.653073] systemd[1]: Finished Remount Root and Kernel File Systems. [ 67.656325] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 67.656342] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 67.656877] systemd[1]: Starting Load/Save Random Seed... [ 67.657291] systemd[1]: Starting Create System Users... [ 67.657560] systemd[1]: Finished Uncomplicated firewall. [ 67.661463] lp: driver loaded but no devices found [ 67.666661] ppdev: user-space parallel port driver [ 67.668998] systemd[1]: Finished Load/Save Random Seed. [ 67.669067] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 67.671484] systemd[1]: Finished Create System Users. [ 67.671902] systemd[1]: Starting Create Static Device Nodes in /dev... [ 67.676717] systemd[1]: Finished Create Static Device Nodes in /dev. [ 67.677422] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 67.677709] systemd[1]: Finished Load Kernel Modules. [ 67.678163] systemd[1]: Starting Apply Kernel Variables... [ 67.680207] systemd[1]: Finished Set the console keyboard layout. [ 67.687000] systemd[1]: Finished Apply Kernel Variables. [ 67.696964] systemd[1]: Started Journal Service. [ 67.703261] systemd-journald[461]: Received client request to flush runtime journal. [ 67.735404] loop0: detected capacity change from 0 to 113544 [ 67.760360] loop1: detected capacity change from 0 to 161520 [ 67.796398] loop2: detected capacity change from 0 to 133320 [ 67.837121] loop3: detected capacity change from 0 to 533936 [ 67.847265] pstore: Using crash dump compression: deflate [ 67.847272] pstore: Registered efi as persistent store backend [ 67.877887] ccp 0000:0b:00.1: enabling device (0000 -> 0002) [ 67.878070] ccp 0000:0b:00.1: ccp: unable to access the device: you might be running a broken BIOS. [ 67.881184] loop4: detected capacity change from 0 to 66144 [ 67.890605] mc: Linux media interface: v0.10 [ 67.891811] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 67.891815] RAPL PMU: hw unit of domain package 2^-16 Joules [ 67.896818] videodev: Linux video capture interface: v2.00 [ 67.977416] kvm: Nested Virtualization enabled [ 67.977418] SVM: kvm: Nested Paging enabled [ 67.977428] SVM: Virtual VMLOAD VMSAVE supported [ 67.977428] SVM: Virtual GIF supported [ 67.998664] MCE: In-kernel MCE decoding enabled. [ 68.027203] nvidia: module license 'NVIDIA' taints kernel. [ 68.027205] Disabling lock debugging due to kernel taint [ 68.049111] EDAC amd64: F17h_M70h detected (node 0). [ 68.049161] EDAC amd64: Node 0: DRAM ECC disabled. [ 68.049372] pwc: Logitech/Cisco VT Camera webcam detected. [ 68.049921] pwc: Failed to set LED on/off time (-32) [ 68.049927] fbcon: Taking over console [ 68.049987] Console: switching to colour frame buffer device 160x45 [ 68.051724] pwc: send_video_command error -32 [ 68.051727] pwc: Failed to set video mode VGA@30 fps; return code = -32 [ 68.051733] Philips webcam: probe of 5-1.1:1.0 failed with error -32 [ 68.051753] usbcore: registered new interface driver Philips webcam [ 68.051774] uvcvideo: Found UVC 1.00 device Logi Webcam C920e (046d:08b6) [ 68.059187] input: Logi Webcam C920e as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.1/5-1.1:1.0/input/input18 [ 68.059222] usbcore: registered new interface driver uvcvideo [ 68.059223] USB Video Class driver (1.1.1) [ 68.059790] nvidia-nvlink: Nvlink Core is being initialized, major device number 511 [ 68.060277] nvidia 0000:09:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [ 68.106687] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 470.57.02 Tue Jul 13 16:14:05 UTC 2021 [ 68.172772] EDAC amd64: F17h_M70h detected (node 0). [ 68.172817] EDAC amd64: Node 0: DRAM ECC disabled. [ 68.173250] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 470.57.02 Tue Jul 13 16:06:24 UTC 2021 [ 68.175413] intel_rapl_common: Found RAPL domain package [ 68.175416] intel_rapl_common: Found RAPL domain core [ 68.175479] [drm] [nvidia-drm] [GPU ID 0x00000900] Loading driver [ 68.179441] snd_hda_intel 0000:09:00.1: enabling device (0000 -> 0002) [ 68.179499] snd_hda_intel 0000:09:00.1: Disabling MSI [ 68.179518] snd_hda_intel 0000:09:00.1: Handle vga_switcheroo audio client [ 68.179631] snd_hda_intel 0000:0b:00.4: enabling device (0000 -> 0002) [ 68.195939] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 68.195942] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 68.195943] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 68.195945] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 68.195945] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 68.195946] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 68.195947] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 68.195948] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 68.197675] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input19 [ 68.197717] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input20 [ 68.197753] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input21 [ 68.197786] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input22 [ 68.197822] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input23 [ 68.197856] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input24 [ 68.197885] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0/input25 [ 68.456616] EDAC amd64: F17h_M70h detected (node 0). [ 68.456626] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input26 [ 68.456659] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input27 [ 68.456667] EDAC amd64: Node 0: DRAM ECC disabled. [ 68.456706] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input28 [ 68.456744] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input29 [ 68.456775] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1/input30 [ 68.808563] EDAC amd64: F17h_M70h detected (node 0). [ 68.808612] EDAC amd64: Node 0: DRAM ECC disabled. [ 68.809010] FAT-fs (sdc2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 68.809649] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 68.840863] audit: type=1400 audit(1627794784.806:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1021 comm="apparmor_parser" [ 68.841075] audit: type=1400 audit(1627794784.806:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1023 comm="apparmor_parser" [ 68.841569] audit: type=1400 audit(1627794784.806:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1026 comm="apparmor_parser" [ 68.841571] audit: type=1400 audit(1627794784.806:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1026 comm="apparmor_parser" [ 68.842448] audit: type=1400 audit(1627794784.806:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1018 comm="apparmor_parser" [ 68.842451] audit: type=1400 audit(1627794784.806:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1018 comm="apparmor_parser" [ 68.842453] audit: type=1400 audit(1627794784.806:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1018 comm="apparmor_parser" [ 68.843516] audit: type=1400 audit(1627794784.806:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1025 comm="apparmor_parser" [ 68.844916] audit: type=1400 audit(1627794784.810:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1029 comm="apparmor_parser" [ 68.845482] audit: type=1400 audit(1627794784.810:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1020 comm="apparmor_parser" [ 68.932545] EDAC amd64: F17h_M70h detected (node 0). [ 68.932591] EDAC amd64: Node 0: DRAM ECC disabled. [ 68.936184] Adding 4193784k swap on /dev/mapper/cryptswap. Priority:-2 extents:1 across:4193784k SSFS [ 69.032557] EDAC amd64: F17h_M70h detected (node 0). [ 69.032603] EDAC amd64: Node 0: DRAM ECC disabled. [ 69.065981] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:09:00.0 on minor 0 [ 69.075301] nvidia_uvm: module uses symbols from proprietary module nvidia, inheriting taint. [ 69.077437] nvidia-uvm: Loaded the UVM driver, major device number 509. [ 69.168581] EDAC amd64: F17h_M70h detected (node 0). [ 69.168629] EDAC amd64: Node 0: DRAM ECC disabled. [ 69.272156] Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver (mii_bus:phy_addr=r8169-800:00, irq=IGNORE) [ 69.296555] EDAC amd64: F17h_M70h detected (node 0). [ 69.296604] EDAC amd64: Node 0: DRAM ECC disabled. [ 69.472225] r8169 0000:08:00.0 enp8s0: Link is Down [ 69.617613] loop5: detected capacity change from 0 to 8 [ 69.676538] EDAC amd64: F17h_M70h detected (node 0). [ 69.676581] EDAC amd64: Node 0: DRAM ECC disabled. [ 69.784551] EDAC amd64: F17h_M70h detected (node 0). [ 69.784594] EDAC amd64: Node 0: DRAM ECC disabled. [ 69.872563] EDAC amd64: F17h_M70h detected (node 0). [ 69.872608] EDAC amd64: Node 0: DRAM ECC disabled. [ 69.960490] EDAC amd64: F17h_M70h detected (node 0). [ 69.960534] EDAC amd64: Node 0: DRAM ECC disabled. [ 72.465908] rfkill: input handler disabled [ 72.542961] ------------[ cut here ]------------ [ 72.542963] WARNING: CPU: 2 PID: 1752 at /var/lib/dkms/nvidia/470.57.02/build/nvidia-drm/nvidia-drm-drv.c:574 nv_drm_master_set+0x27/0x30 [nvidia_drm] [ 72.542970] Modules linked in: nvidia_uvm(POE) dm_crypt nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg soundwire_intel intel_rapl_msr nvidia_drm(POE) soundwire_generic_allocation intel_rapl_common soundwire_cadence nvidia_modeset(POE) snd_hda_codec snd_hda_core snd_hwdep soundwire_bus snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine nvidia(POE) pwc uvcvideo snd_pcm edac_mce_amd snd_seq_midi videobuf2_vmalloc snd_seq_midi_event videobuf2_memops kvm_amd snd_rawmidi videobuf2_v4l2 kvm snd_seq videobuf2_common videodev drm_kms_helper snd_seq_device mc rapl input_leds snd_timer cec rc_core snd fb_sys_fops syscopyarea sysfillrect sysimgblt ccp soundcore k10temp wmi_bmof efi_pstore mac_hid sch_fq_codel msr parport_pc ppdev lp parport drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear system76_io(OE) [ 72.543006] system76_acpi(OE) hid_glorious hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd r8169 glue_helper ahci xhci_pci gpio_amdpt i2c_piix4 realtek libahci xhci_pci_renesas wmi gpio_generic [ 72.543016] CPU: 2 PID: 1752 Comm: gst-plugin-scan Tainted: P OE 5.11.0-7620-generic #21~1626191760~21.04~55de9c3-Ubuntu [ 72.543018] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P6.40 08/31/2020 [ 72.543019] RIP: 0010:nv_drm_master_set+0x27/0x30 [nvidia_drm] [ 72.543022] Code: f0 e8 eb 0f 1f 44 00 00 55 48 8b 47 48 48 8b 78 20 48 8b 05 bb 6c 00 00 48 89 e5 48 8b 40 28 e8 0f 70 25 ec 84 c0 74 02 5d c3 <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 [ 72.543023] RSP: 0018:ffffa905884fbb80 EFLAGS: 00010246 [ 72.543024] RAX: 0000000000000000 RBX: ffff95c644299000 RCX: 0000000000000008 [ 72.543026] RDX: ffffffffc2f09ed8 RSI: 0000000000000292 RDI: ffffffffc2f09ea0 [ 72.543027] RBP: ffffa905884fbb80 R08: 0000000000000008 R09: ffffa905884fbb68 [ 72.543027] R10: 0000000000000000 R11: ffff95c649d586da R12: ffff95c647434180 [ 72.543028] R13: ffff95c652429800 R14: 0000000000000000 R15: ffff95c652429800 [ 72.543029] FS: 00007f2c8a71f740(0000) GS:ffff95c94e880000(0000) knlGS:0000000000000000 [ 72.543030] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.543031] CR2: 00007f2c892a4000 CR3: 000000010ae82000 CR4: 0000000000350ee0 [ 72.543032] Call Trace: [ 72.543034] drm_new_set_master+0x7e/0x100 [drm] [ 72.543049] drm_master_open+0x6e/0xa0 [drm] [ 72.543062] drm_open+0xf8/0x250 [drm] [ 72.543075] drm_stub_open+0xba/0x140 [drm] [ 72.543089] chrdev_open+0xf7/0x220 [ 72.543092] ? cdev_device_add+0x90/0x90 [ 72.543094] do_dentry_open+0x156/0x370 [ 72.543096] vfs_open+0x2d/0x30 [ 72.543097] do_open+0x1c3/0x340 [ 72.543099] path_openat+0x10a/0x1d0 [ 72.543101] do_filp_open+0x8c/0x130 [ 72.543103] ? __check_object_size+0x1c/0x20 [ 72.543104] do_sys_openat2+0x9b/0x150 [ 72.543106] __x64_sys_openat+0x56/0x90 [ 72.543108] do_syscall_64+0x38/0x90 [ 72.543109] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 72.543111] RIP: 0033:0x7f2c8abc98db [ 72.543113] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 2b 0c 25 [ 72.543114] RSP: 002b:00007ffd0429b880 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [ 72.543115] RAX: ffffffffffffffda RBX: 00005630faf7a120 RCX: 00007f2c8abc98db [ 72.543116] RDX: 0000000000080002 RSI: 00005630faf7ed40 RDI: 00000000ffffff9c [ 72.543116] RBP: 00005630faf7ed40 R08: 00007f2c892844f0 R09: 00005630faf7f000 [ 72.543117] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080002 [ 72.543118] R13: 00007f2c896a1120 R14: 00005630faf7d900 R15: 00007f2c896837a9 [ 72.543119] ---[ end trace 952bffe484565c89 ]--- [ 72.751177] r8169 0000:08:00.0 enp8s0: Link is Up - 1Gbps/Full - flow control off [ 72.751189] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready [ 89.820527] usb 5-1.2: new full-speed USB device number 6 using xhci_hcd [ 89.995999] usb 5-1.2: New USB device found, idVendor=04d9, idProduct=0356, bcdDevice= 1.10 [ 89.996004] usb 5-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 89.996005] usb 5-1.2: Product: Ducky Keyboard [ 89.996006] usb 5-1.2: Manufacturer: DuckyChannel International Co., Ltd. [ 90.132579] input: DuckyChannel International Co., Ltd. Ducky Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.0/0003:04D9:0356.0009/input/input31 [ 90.192735] hid-generic 0003:04D9:0356.0009: input,hidraw5: USB HID v1.11 Keyboard [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input0 [ 90.198164] hid-generic 0003:04D9:0356.000A: hiddev2,hidraw6: USB HID v1.11 Device [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input1 [ 90.202164] input: DuckyChannel International Co., Ltd. Ducky Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.000B/input/input32 [ 90.260746] input: DuckyChannel International Co., Ltd. Ducky Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.000B/input/input33 [ 90.260806] input: DuckyChannel International Co., Ltd. Ducky Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.000B/input/input34 [ 90.260899] input: DuckyChannel International Co., Ltd. Ducky Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-1/5-1.2/5-1.2:1.2/0003:04D9:0356.000B/input/input35 [ 90.260977] hid-generic 0003:04D9:0356.000B: input,hidraw7: USB HID v1.11 Mouse [DuckyChannel International Co., Ltd. Ducky Keyboard] on usb-0000:0b:00.3-1.2/input2 [ 92.988924] rfkill: input handler enabled [ 93.229989] usb 5-1.1: reset high-speed USB device number 4 using xhci_hcd [ 96.707717] ------------[ cut here ]------------ [ 96.707719] WARNING: CPU: 11 PID: 2799 at /var/lib/dkms/nvidia/470.57.02/build/nvidia-drm/nvidia-drm-drv.c:574 nv_drm_master_set+0x27/0x30 [nvidia_drm] [ 96.707727] Modules linked in: nvidia_uvm(POE) dm_crypt nls_iso8859_1 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg soundwire_intel intel_rapl_msr nvidia_drm(POE) soundwire_generic_allocation intel_rapl_common soundwire_cadence nvidia_modeset(POE) snd_hda_codec snd_hda_core snd_hwdep soundwire_bus snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine nvidia(POE) pwc uvcvideo snd_pcm edac_mce_amd snd_seq_midi videobuf2_vmalloc snd_seq_midi_event videobuf2_memops kvm_amd snd_rawmidi videobuf2_v4l2 kvm snd_seq videobuf2_common videodev drm_kms_helper snd_seq_device mc rapl input_leds snd_timer cec rc_core snd fb_sys_fops syscopyarea sysfillrect sysimgblt ccp soundcore k10temp wmi_bmof efi_pstore mac_hid sch_fq_codel msr parport_pc ppdev lp parport drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear system76_io(OE) [ 96.707763] system76_acpi(OE) hid_glorious hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd r8169 glue_helper ahci xhci_pci gpio_amdpt i2c_piix4 realtek libahci xhci_pci_renesas wmi gpio_generic [ 96.707773] CPU: 11 PID: 2799 Comm: gst-plugin-scan Tainted: P W OE 5.11.0-7620-generic #21~1626191760~21.04~55de9c3-Ubuntu [ 96.707775] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P6.40 08/31/2020 [ 96.707776] RIP: 0010:nv_drm_master_set+0x27/0x30 [nvidia_drm] [ 96.707779] Code: f0 e8 eb 0f 1f 44 00 00 55 48 8b 47 48 48 8b 78 20 48 8b 05 bb 6c 00 00 48 89 e5 48 8b 40 28 e8 0f 70 25 ec 84 c0 74 02 5d c3 <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 [ 96.707780] RSP: 0018:ffffa9058870fb80 EFLAGS: 00010246 [ 96.707781] RAX: 0000000000000000 RBX: ffff95c6a94af400 RCX: 0000000000000008 [ 96.707782] RDX: ffffffffc2f09ed8 RSI: 0000000000000292 RDI: ffffffffc2f09ea0 [ 96.707783] RBP: ffffa9058870fb80 R08: 0000000000000008 R09: ffffa9058870fb68 [ 96.707784] R10: 0000000000000000 R11: ffff95c649d586da R12: ffff95c64f68bcc0 [ 96.707785] R13: ffff95c652429800 R14: 0000000000000000 R15: ffff95c652429800 [ 96.707786] FS: 00007f464c8ca740(0000) GS:ffff95c94eac0000(0000) knlGS:0000000000000000 [ 96.707787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 96.707788] CR2: 0000559e6a748560 CR3: 0000000169534000 CR4: 0000000000350ee0 [ 96.707789] Call Trace: [ 96.707791] drm_new_set_master+0x7e/0x100 [drm] [ 96.707806] drm_master_open+0x6e/0xa0 [drm] [ 96.707819] drm_open+0xf8/0x250 [drm] [ 96.707832] drm_stub_open+0xba/0x140 [drm] [ 96.707846] chrdev_open+0xf7/0x220 [ 96.707850] ? cdev_device_add+0x90/0x90 [ 96.707851] do_dentry_open+0x156/0x370 [ 96.707853] vfs_open+0x2d/0x30 [ 96.707855] do_open+0x1c3/0x340 [ 96.707856] path_openat+0x10a/0x1d0 [ 96.707858] do_filp_open+0x8c/0x130 [ 96.707860] ? __check_object_size+0x1c/0x20 [ 96.707862] do_sys_openat2+0x9b/0x150 [ 96.707863] __x64_sys_openat+0x56/0x90 [ 96.707865] do_syscall_64+0x38/0x90 [ 96.707867] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 96.707869] RIP: 0033:0x7f464cd748db [ 96.707870] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 2b 0c 25 [ 96.707871] RSP: 002b:00007ffed6dd41c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [ 96.707873] RAX: ffffffffffffffda RBX: 0000559e6a741120 RCX: 00007f464cd748db [ 96.707873] RDX: 0000000000080002 RSI: 0000559e6a746520 RDI: 00000000ffffff9c [ 96.707874] RBP: 0000559e6a746520 R08: 00007f464b60b4f0 R09: 0000559e6a7457b5 [ 96.707875] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080002 [ 96.707875] R13: 00007f464b4ee120 R14: 0000559e6a6e8390 R15: 00007f464b4d07a9 [ 96.707877] ---[ end trace 952bffe484565c8a ]--- emma@pop-os:~$ I noticed my keyboard was getting in the way a bit so here's the lsusb -v for it Bus 005 Device 006: ID 04d9:0356 Holtek Semiconductor, Inc. Ducky Keyboard Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04d9 Holtek Semiconductor, Inc. idProduct 0x0356 bcdDevice 1.10 iManufacturer 3 DuckyChannel International Co., Ltd. iProduct 1 Ducky Keyboard iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x005b bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 64 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 34 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 203 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 I'm also unsure why it's taking 30 seconds for the kernel to work after configuring one of my drives for UDMA/133.

FoxX_MC

RizeAbove

dragonrider070

Josi802

GlennTheMaster

MineaBeef