Limit for i7 10700 power consumption
Limit for i7 10700 power consumption
Hello, your system is showing high temperatures during Cinebench, which is normal for an I7-10700 under load. The drop after 10-15 seconds suggests the CPU is throttling to stay safe. You can safely remove the watt limit and monitor temperatures closely. For your setup, aim for a max of around 125W total, but keep an eye on real-time temps to ensure stability.
Your processor is a 10700, not the "K" variant, which offers overclocking features and higher power limits by default. Your PL1 stands at 65 watts and PL2 likely around 125 watts, though it may exceed 65 if applicable. During benchmark runs, PL2 kicks in for the first 10-15 seconds before reverting to PL1 at 65 watts. You can track power consumption via HWinfo. For non-K CPUs, boosting power limits isn't possible—consult your BIOS for options. If you're already purchasing an I7 or higher, sticking with a K CPU makes sense unless you need compact builds. Using ThrottleStop could extend turbo time, but remember to undervolt the chip due to heat. A more robust air cooler would help, and experimenting with Intel XTU might yield further gains.
Certain motherboards include an Unlimited BIOS feature. This configures turbo power to its maximum, 4095, stopping any power restriction. Values above 200 achieve the same result. If the BIOS restricts turbo limits, you may use ThrottleStop instead. Some BIOS releases offer a setting to adjust turbo limits, though this isn't always reliable with non-K series CPUs. As long as turbo limits remain unlocked, ThrottleStop functions properly. I adjusted my PL1 and PL2 turbo limits to 300 for the 10850K. If your CPU hits the 100°C thermal threshold, think about reducing the voltage. The standard voltage is too high; lowering it cuts power use and heat. A 15°C variation during a full Cinebench load can occur with the CPU, and after lowering voltage, the 10850K stays cool even with 10 cores.