F5F Stay Refreshed Hardware Desktop LED on CPU indicates issues; Ethernet fails post AIO replacement.

LED on CPU indicates issues; Ethernet fails post AIO replacement.

LED on CPU indicates issues; Ethernet fails post AIO replacement.

S
samigurl0903
Senior Member
Find
603
02-03-2018, 09:41 PM
#1
Hello, I just upgraded from my NZXT Kraken X63 to the newer Kraken 360, changed my case afterward, and the lighting is still working. After the switch, my motherboard displayed the CPU debug LED, but whenever I restart my PC, internet remains unavailable. I need to adjust the adapter settings—turning it off and back on—to get a stable connection. I only replaced the AIO and didn’t modify any BIOS settings. I’m not very experienced with fixes, so any advice would be super helpful!

Details: MSI B550 GAMING PLUS AMD RYZEN 5 5600X Corsair Vengeance Pro 4x8GB DDR4 3200 MHz GIGABYTE - NVIDIA GeForce RTX 3070 Ti AORUS MASTER 8GB Corsair RM850x NZXT Kraken 360 1TB WD_Black SN750 SE 1TB Samsung 980 1TB Samsung 870 EVO. I’ve attached two photos: one with the old AIO and no LED, another with the new setup and LED active. Thanks!
Reply
Reply
S
samigurl0903
02-03-2018, 09:41 PM #1

Hello, I just upgraded from my NZXT Kraken X63 to the newer Kraken 360, changed my case afterward, and the lighting is still working. After the switch, my motherboard displayed the CPU debug LED, but whenever I restart my PC, internet remains unavailable. I need to adjust the adapter settings—turning it off and back on—to get a stable connection. I only replaced the AIO and didn’t modify any BIOS settings. I’m not very experienced with fixes, so any advice would be super helpful!

Details: MSI B550 GAMING PLUS AMD RYZEN 5 5600X Corsair Vengeance Pro 4x8GB DDR4 3200 MHz GIGABYTE - NVIDIA GeForce RTX 3070 Ti AORUS MASTER 8GB Corsair RM850x NZXT Kraken 360 1TB WD_Black SN750 SE 1TB Samsung 980 1TB Samsung 870 EVO. I’ve attached two photos: one with the old AIO and no LED, another with the new setup and LED active. Thanks!

Reply
Reply
J
jokkis32
Junior Member
Find
32
02-03-2018, 09:41 PM
#2
Updated the information and found no changes. Purchased another 5600x but the light persists. Disassembled everything except the CPU and motherboard. The light remains on even when the CPU is removed from its socket. Still unsure of the cause. The board appears to be the problem, and it's only three months old. Now the PC boots in about 70-75 seconds, and fans reach full speed at 100% connected to my NZXT Fan hub.
Reply
Reply
J
jokkis32
02-03-2018, 09:41 PM #2

Updated the information and found no changes. Purchased another 5600x but the light persists. Disassembled everything except the CPU and motherboard. The light remains on even when the CPU is removed from its socket. Still unsure of the cause. The board appears to be the problem, and it's only three months old. Now the PC boots in about 70-75 seconds, and fans reach full speed at 100% connected to my NZXT Fan hub.

Reply
Reply