F5F Stay Refreshed Hardware Desktop Led D-RAM perpetually active | no additional info

Led D-RAM perpetually active | no additional info

Led D-RAM perpetually active | no additional info

M
MadMar
Member
Find
222
09-08-2020, 07:34 AM
#1
My setup: Mobo: Asus Rog Strix B550-F Gaming WiFi II CPU: Ryzen 7 5800X RAM: Corsair Vengeance RGB Pro SL 32GB (2x16gb) 3600mHz C18 GPU: RTX 3070 Ventus 3x PSU:Corsair RM850 HI. I’m still unsure what exactly occurred—it might have been a power surge or an outage. As the post indicates, I’m facing an issue with my build. The QLED for the D-RAM (usually stays on without power-up, sometimes it turns orange, then red, and finally white, never showing post) only happens in one RAM slot. I’ve tried many things online: unplugged cables, reconnected components, removed and reattached the battery, reset CMOS, updated BIOS via flashback, and even booted with just one RAM slot. When I power it on and off quickly, sometimes it passes through orange, then red, then white, but still no boot. It seems that when both RAMs are installed, the QLED changes from orange to red and then all LEDs go off, preventing a start. Despite these attempts, I haven’t managed to get a screen boot or any display signal at all.
Reply
Reply
M
MadMar
09-08-2020, 07:34 AM #1

My setup: Mobo: Asus Rog Strix B550-F Gaming WiFi II CPU: Ryzen 7 5800X RAM: Corsair Vengeance RGB Pro SL 32GB (2x16gb) 3600mHz C18 GPU: RTX 3070 Ventus 3x PSU:Corsair RM850 HI. I’m still unsure what exactly occurred—it might have been a power surge or an outage. As the post indicates, I’m facing an issue with my build. The QLED for the D-RAM (usually stays on without power-up, sometimes it turns orange, then red, and finally white, never showing post) only happens in one RAM slot. I’ve tried many things online: unplugged cables, reconnected components, removed and reattached the battery, reset CMOS, updated BIOS via flashback, and even booted with just one RAM slot. When I power it on and off quickly, sometimes it passes through orange, then red, then white, but still no boot. It seems that when both RAMs are installed, the QLED changes from orange to red and then all LEDs go off, preventing a start. Despite these attempts, I haven’t managed to get a screen boot or any display signal at all.

Reply
Reply