F5F Stay Refreshed Hardware Desktop LAN Help

LAN Help

LAN Help

J
james26665
Senior Member
537
10-13-2023, 05:50 PM
#1
I just assembled a new PC using the MSI z790i. Connecting my Ethernet from the office works, but not in the living room. Other devices connect fine there. When I plug the living room cable back in, it functions properly. I've tried removing and reinstalling the LAN drivers, but nothing helps. Could someone suggest replacing the Ethernet cable on the living room side? Thanks.
J
james26665
10-13-2023, 05:50 PM #1

I just assembled a new PC using the MSI z790i. Connecting my Ethernet from the office works, but not in the living room. Other devices connect fine there. When I plug the living room cable back in, it functions properly. I've tried removing and reinstalling the LAN drivers, but nothing helps. Could someone suggest replacing the Ethernet cable on the living room side? Thanks.

M
misiek93
Member
182
10-14-2023, 02:24 AM
#2
Turn off the router and then power it back on. What appears on the devices connected to the ports is the status of the connections.
M
misiek93
10-14-2023, 02:24 AM #2

Turn off the router and then power it back on. What appears on the devices connected to the ports is the status of the connections.

_
_sharktapus_
Member
107
10-15-2023, 12:58 AM
#3
and additional network equipment... possibly: arp -a I encountered unusual entries with ambiguous ARP lists.
_
_sharktapus_
10-15-2023, 12:58 AM #3

and additional network equipment... possibly: arp -a I encountered unusual entries with ambiguous ARP lists.

_
_xxtarget_xx
Member
66
10-15-2023, 02:08 AM
#4
Running arp -a in the command prompt shows no active ARP entries. When your PC powers on over the Ethernet in the living room, the port lights up, flashes orange, and then turns off after startup.
_
_xxtarget_xx
10-15-2023, 02:08 AM #4

Running arp -a in the command prompt shows no active ARP entries. When your PC powers on over the Ethernet in the living room, the port lights up, flashes orange, and then turns off after startup.

N
NaomiTim
Junior Member
14
10-15-2023, 08:12 AM
#5
You're asking about the contents or items located behind the ports.
N
NaomiTim
10-15-2023, 08:12 AM #5

You're asking about the contents or items located behind the ports.

T
TayPlaysMC
Member
91
10-15-2023, 09:00 AM
#6
The wires are heading in a specific direction—toward a switch or router. With just the cables, they can't link up anywhere.
T
TayPlaysMC
10-15-2023, 09:00 AM #6

The wires are heading in a specific direction—toward a switch or router. With just the cables, they can't link up anywhere.

X
xDonjox
Junior Member
38
10-15-2023, 10:55 AM
#7
It’s heading to a router. I’m sure it’s linked correctly since I’ve checked the same cable and port with other gadgets and everything functions properly.
X
xDonjox
10-15-2023, 10:55 AM #7

It’s heading to a router. I’m sure it’s linked correctly since I’ve checked the same cable and port with other gadgets and everything functions properly.

B
Brain_Stew_GD
Junior Member
34
10-15-2023, 07:54 PM
#8
Begin at the spot where it isn’t working. Check if the NIC LED lights up after connecting. Open cmd.exe via search and run ipconfig /all to see the IP address. Confirm whether it starts with 192 or 169.
B
Brain_Stew_GD
10-15-2023, 07:54 PM #8

Begin at the spot where it isn’t working. Check if the NIC LED lights up after connecting. Open cmd.exe via search and run ipconfig /all to see the IP address. Confirm whether it starts with 192 or 169.

W
WSWdog
Member
65
10-16-2023, 01:18 AM
#9
Starts at 192. The NIC LEDs activate during startup and then shut off after Windows loads.
W
WSWdog
10-16-2023, 01:18 AM #9

Starts at 192. The NIC LEDs activate during startup and then shut off after Windows loads.

S
Sussu
Senior Member
708
10-19-2023, 08:11 AM
#10
192 indicates a working network connection. The main issue seems to be that it shuts down again. Since it functions in the office, it’s likely chipset drivers are installed. Are the Wi-Fi settings activated on this machine as well? Did you check the IP configuration after turning off the network interface?
S
Sussu
10-19-2023, 08:11 AM #10

192 indicates a working network connection. The main issue seems to be that it shuts down again. Since it functions in the office, it’s likely chipset drivers are installed. Are the Wi-Fi settings activated on this machine as well? Did you check the IP configuration after turning off the network interface?