It's running at its lowest speed and not hitting the 3.4GHz target.
It's running at its lowest speed and not hitting the 3.4GHz target.
I've enabled Intel Turbo Boost in the BIOS, and the power plan is set to high performance. I looked for a solution online suggesting changing the Intel PPMC registry value from 3 to 4, but that didn't resolve the issue. Since I can't access overclocking settings, there might be another fix available. I'm still at 2.9 GHz even when the system is under load.
Maximum boost speed applies only to single-core tasks. Refer to the Intel page for details. Clicking the ? next to Max Turbo Frequency will show it still works for multi-core workloads, though at a lower boost level. It’s possible the manufacturer lacks adequate cooling or power supply, or has restricted boost for other reasons. This doesn’t improve performance and actually consumes more energy. It stops the CPU from entering low-power mode when feasible, which could help maintain cooler temperatures.
Restore Intel PPM to its initial setting. Follow the instructions on ThrottleStop 9.6 for guidance. Capture screenshots of the FIVR and TPL interfaces to observe BIOS configurations and available adjustments. Check the Limit Reasons window for any throttling indicators in the CORE section. Ensure low power states are activated in BIOS to support Intel Turbo Boost on the 4460S. Confirm the Windows version you have installed, as performance may vary with unsupported OS versions. The 4460S features a low-power CPU with a 65W TDP rating; full load could limit turbo boost output. ThrottleStop may help mitigate these constraints.
bios doesnt have much options since its an oem board but theres turbo mode and virtualization
The cooling performs exceptionally well. Under heavy use it draws just 20 watts while maintaining a temperature of 49 degrees Celsius.
I attempted to use it and reviewed some tutorials, but it remains unresponsive. You might need to enable CPU Boost in the registry settings.
Share some ThrottleStop images. Many creators use newer CPUs and might not understand the setup for a 4th Gen CPU. Did you revert intelppm Start to version 3? You don’t need to adjust any registry settings. Click the "Restore plan defaults" option in the Windows Power Options menu to return your power plan to its original settings.