F5F Stay Refreshed Hardware Desktop It seems there is a significant delay on the dxgkrnl. sys process when using LatencyMon.

It seems there is a significant delay on the dxgkrnl. sys process when using LatencyMon.

It seems there is a significant delay on the dxgkrnl. sys process when using LatencyMon.

J
JustGame211
Member
59
06-11-2022, 10:02 AM
#1
Hello everyone, this is my first time here, so I’m checking if I did everything correctly. I’ve been experiencing some micro-stuttering in certain games for a while now—mainly with Unreal Engine 5 titles and a few others like Cyberpunk 2077. Recently, I discovered LatencyMon and decided to give it a shot to see how it performs. So far, I’m unsure if the results are positive or negative, but I think I have quite high DPC routine execution times on dxgkrnl.sys and wdf01000.sys. I plan to share all the details on a pastebin along with some screenshots, if needed. I don’t know if a minute is sufficient for testing, but I’ve read that usually that’s what you should check for issues.

Here are my specs:
- CPU: 5800x3d
- CPU cooler: DeepCool LS720
- Motherboard: Asus Prime B450 Plus, latest BIOS (version 4644)
- RAM: 32GB (8x4) Corsair Vengeance 3200MHz CL16
- SSD/HDD: Samsung 990Pro 1TB (main drive), Crucial MX500 1TB, Silicon Power 2TB
- GPU: RX 9070XT (driver: 25.9.2)
- PSU: Corsair RM750x (purchased on February 13, 2023)
- Chassis: LianLi Lancool 216
- OS: Windows 11 25H2
- Monitor: Benq Mobiuz Ex2510S (FHD, 165Hz), LG 27GR75Q UltraGear (QHD, 165Hz)
J
JustGame211
06-11-2022, 10:02 AM #1

Hello everyone, this is my first time here, so I’m checking if I did everything correctly. I’ve been experiencing some micro-stuttering in certain games for a while now—mainly with Unreal Engine 5 titles and a few others like Cyberpunk 2077. Recently, I discovered LatencyMon and decided to give it a shot to see how it performs. So far, I’m unsure if the results are positive or negative, but I think I have quite high DPC routine execution times on dxgkrnl.sys and wdf01000.sys. I plan to share all the details on a pastebin along with some screenshots, if needed. I don’t know if a minute is sufficient for testing, but I’ve read that usually that’s what you should check for issues.

Here are my specs:
- CPU: 5800x3d
- CPU cooler: DeepCool LS720
- Motherboard: Asus Prime B450 Plus, latest BIOS (version 4644)
- RAM: 32GB (8x4) Corsair Vengeance 3200MHz CL16
- SSD/HDD: Samsung 990Pro 1TB (main drive), Crucial MX500 1TB, Silicon Power 2TB
- GPU: RX 9070XT (driver: 25.9.2)
- PSU: Corsair RM750x (purchased on February 13, 2023)
- Chassis: LianLi Lancool 216
- OS: Windows 11 25H2
- Monitor: Benq Mobiuz Ex2510S (FHD, 165Hz), LG 27GR75Q UltraGear (QHD, 165Hz)

R
Razerbag
Junior Member
49
06-11-2022, 04:45 PM
#2
Welcome to the forums, newcomer! Here are the details of your build in the requested format:
CPU: [CPU information]
CPU cooler: [Cooler model]
Motherboard: [Model name]
Ram: [RAM type and amount]
SSD/HDD: [Storage type and capacity]
GPU: [GPU model]
PSU: [Power supply details]
Chassis: [Case type]
OS: [Operating system]
Monitor: [Monitor information]
Please add the age of the PSU along with its make and model. BIOS version for your motherboard and GPU driver version are also required at this time.
R
Razerbag
06-11-2022, 04:45 PM #2

Welcome to the forums, newcomer! Here are the details of your build in the requested format:
CPU: [CPU information]
CPU cooler: [Cooler model]
Motherboard: [Model name]
Ram: [RAM type and amount]
SSD/HDD: [Storage type and capacity]
GPU: [GPU model]
PSU: [Power supply details]
Chassis: [Case type]
OS: [Operating system]
Monitor: [Monitor information]
Please add the age of the PSU along with its make and model. BIOS version for your motherboard and GPU driver version are also required at this time.