Issues with stable RAM OC on the x570 Aorus Master / Ripjaw V 3200.

F5F Stay Refreshed Hardware Desktop Issues with stable RAM OC on the x570 Aorus Master / Ripjaw V 3200.

Doni_Play
Junior Member

10-21-2019, 09:51 PM

I studied Anthony's overclocking instructions, checked HardwareUnboxed’s tips, and watched some YouTube videos. Still, I’m struggling to get any stable overclock on my RAM. Even the smallest boosts aren’t holding up in games, and higher speeds seem to cause crashes or reset issues. I’m using: R7-3800X X570 AORUS Master G.Skill Ripjaws V 32GB (4x8) at 3200MHz with XMP settings. My goal is either push it to 3600MHz without timing problems or lower the timings. I’ve followed Anthony’s advice, but the changes don’t always stick. My RAM appears to be Samsung B-die and is decent, but the Master chipset is top-tier. I think it should handle one or the other, but I’m not sure if I missed a crucial setting that Anthony or HardwareUnboxed overlooked. Could it be that I’ve lost too much flexibility in the process? Or is there a tiny adjustment I need to make?

Doni_Play

10-21-2019, 09:51 PM #1

xXRAXERXx
Posting Freak

817

10-22-2019, 04:14 AM

No, I didn't forget. Please clarify what you're asking about the voltage.

xXRAXERXx

10-22-2019, 04:14 AM #2

No, I didn't forget. Please clarify what you're asking about the voltage.

Dj_Nikita
Member

10-25-2019, 03:41 AM

Did you make contact with the voltage? The 3200MHz CL15 isn't assured to hit B-die, but the 3200 14-14-14-34 works (though I don't suggest targeting B-die unless you have an unlimited budget)

Dj_Nikita

10-25-2019, 03:41 AM #3

Did you make contact with the voltage? The 3200MHz CL15 isn't assured to hit B-die, but the 3200 14-14-14-34 works (though I don't suggest targeting B-die unless you have an unlimited budget)

CroKing
Junior Member

10-25-2019, 11:17 AM

I didn’t push it as hard when I went straight to 14-14-14-34, but I did when the Ryzen calculator suggested a safer approach.

CroKing

10-25-2019, 11:17 AM #4

I didn’t push it as hard when I went straight to 14-14-14-34, but I did when the Ryzen calculator suggested a safer approach.

Nejc007
Senior Member

707

10-28-2019, 09:15 AM

And what voltage exactly was used? Also, are you sure it's the correct B-die? Did you try the B-die finder or use that diechecker software, but I can't remember its name?

Nejc007

10-28-2019, 09:15 AM #5

And what voltage exactly was used? Also, are you sure it's the correct B-die? Did you try the B-die finder or use that diechecker software, but I can't remember its name?

MoshySam
Junior Member

10-28-2019, 05:29 PM

It seems I didn’t provide sufficient voltage or missed the adjustment when I tried to make changes. I still can’t modify the settings, but I managed to increase it to 3600MHz and raised the infinity fabric to 1800 at least.

MoshySam

10-28-2019, 05:29 PM #6

SinhasGamerPT
Member

116

10-28-2019, 06:57 PM

It might be due to having four RAM sticks installed. The motherboards struggle to overclock with four sticks at once. Try removing two and see if you get better results. If so, that explains why.

SinhasGamerPT

10-28-2019, 06:57 PM #7

It might be due to having four RAM sticks installed. The motherboards struggle to overclock with four sticks at once. Try removing two and see if you get better results. If so, that explains why.

manglemadness
Member

117

10-29-2019, 07:00 PM

Interestingly, during stable synthetic tests I managed to launch a visually demanding game but it kept crashing. I had to push the overclock to XMP settings just to get it running. It still surprises me how much I can't extract performance from this system given its stability, the AORUS Master specs, and the decent RAM.

manglemadness

10-29-2019, 07:00 PM #8