F5F Stay Refreshed Hardware Desktop Issues with motherboard mounting points not positioning correctly.

Issues with motherboard mounting points not positioning correctly.

Issues with motherboard mounting points not positioning correctly.

B
BeelzebubFiyah
Junior Member
28
07-06-2022, 04:56 PM
#1
Recently I was assembling a system using a Strix X670E-E and a Ryzen 7 7700X in an O11 EVO, but when I aligned the motherboard with the case, the standoffs weren’t lined up correctly. I’m trying to figure out how to fix this alignment.
B
BeelzebubFiyah
07-06-2022, 04:56 PM #1

Recently I was assembling a system using a Strix X670E-E and a Ryzen 7 7700X in an O11 EVO, but when I aligned the motherboard with the case, the standoffs weren’t lined up correctly. I’m trying to figure out how to fix this alignment.

K
Kunall
Member
205
07-07-2022, 12:35 AM
#2
No, the rear I/O panel isn't bent—it appears to be in its normal position.
K
Kunall
07-07-2022, 12:35 AM #2

No, the rear I/O panel isn't bent—it appears to be in its normal position.

D
Daxon_Swag
Junior Member
47
07-07-2022, 12:46 AM
#3
I gave it a bit more tweaking with the IO and it worked.
D
Daxon_Swag
07-07-2022, 12:46 AM #3

I gave it a bit more tweaking with the IO and it worked.

C
CaptainTalion
Member
56
07-07-2022, 01:37 AM
#4
I used to think this was perfectly typical during installation of motherboards in cases. I'd push the board into the chassis and secure it with a screw in the corners.
C
CaptainTalion
07-07-2022, 01:37 AM #4

I used to think this was perfectly typical during installation of motherboards in cases. I'd push the board into the chassis and secure it with a screw in the corners.

C
ChloeET
Senior Member
736
07-07-2022, 06:43 AM
#5
It's often challenging to fit those motherboards with built-in I/O shields properly.
C
ChloeET
07-07-2022, 06:43 AM #5

It's often challenging to fit those motherboards with built-in I/O shields properly.