F5F Stay Refreshed Hardware Desktop Issues with ASRock X670E PRO RS M.2 storage modules

Issues with ASRock X670E PRO RS M.2 storage modules

Issues with ASRock X670E PRO RS M.2 storage modules

Z
zRaidMC
Junior Member
12
01-25-2022, 04:49 PM
#1
You're experiencing issues with limited readability and formatting on your 5 m.2 slots. Here are some possible solutions:

- Check the board's settings for read-only modes or restrictions.
- Ensure all connections are secure and properly seated.
- Try resetting the board or performing a factory reset.
- Verify that the correct drivers or firmware are installed.
- Consult the user manual for specific troubleshooting steps.
Z
zRaidMC
01-25-2022, 04:49 PM #1

You're experiencing issues with limited readability and formatting on your 5 m.2 slots. Here are some possible solutions:

- Check the board's settings for read-only modes or restrictions.
- Ensure all connections are secure and properly seated.
- Try resetting the board or performing a factory reset.
- Verify that the correct drivers or firmware are installed.
- Consult the user manual for specific troubleshooting steps.

U
UltimaArtz
Member
64
01-26-2022, 09:09 PM
#2
I don't have any PCI slots currently in use.
U
UltimaArtz
01-26-2022, 09:09 PM #2

I don't have any PCI slots currently in use.

G
GumiBears
Senior Member
256
01-26-2022, 09:45 PM
#3
The perfect choice for your graphics card
G
GumiBears
01-26-2022, 09:45 PM #3

The perfect choice for your graphics card

I
ItzDutchFTW
Junior Member
33
01-28-2022, 05:55 AM
#4
Are there any SATA drives currently connected? I'm struggling to locate details for that board, though many of these multi-NVMe systems feature one PCIe slot (for the GPU) and a dedicated main M.2 slot with the rest of the connections. [Also...can you confirm your boot drive is properly configured with the operating system?]
I
ItzDutchFTW
01-28-2022, 05:55 AM #4

Are there any SATA drives currently connected? I'm struggling to locate details for that board, though many of these multi-NVMe systems feature one PCIe slot (for the GPU) and a dedicated main M.2 slot with the rest of the connections. [Also...can you confirm your boot drive is properly configured with the operating system?]

J
jamin8or
Junior Member
16
02-03-2022, 11:25 AM
#5
I only have NVMe Gen 3 drives without SATA ports, and the storage is located in the main NVMe M.2 slot. It appears one of them is running slower than expected, with noticeable delays in reading and writing data.
J
jamin8or
02-03-2022, 11:25 AM #5

I only have NVMe Gen 3 drives without SATA ports, and the storage is located in the main NVMe M.2 slot. It appears one of them is running slower than expected, with noticeable delays in reading and writing data.

P
Pyromax33
Member
193
02-04-2022, 12:34 AM
#6
I removed the SSD, cleaned it, and placed it on what looks like a different board than the others. Previously, the other boards would fit into the M.2 reader, but this one didn’t snap. They were loose, so I had to tighten them and make sure they stayed in place. Thanks everyone for your help—I just found it strange that they don’t snap anymore now.
P
Pyromax33
02-04-2022, 12:34 AM #6

I removed the SSD, cleaned it, and placed it on what looks like a different board than the others. Previously, the other boards would fit into the M.2 reader, but this one didn’t snap. They were loose, so I had to tighten them and make sure they stayed in place. Thanks everyone for your help—I just found it strange that they don’t snap anymore now.