Issue with the recently installed system.

Pages (2): 1 2 Next

Makkro
Junior Member

01-07-2021, 02:25 PM

the pc parts include a cpu model 5800x ryzen 5 with undervolted settings, a radeon rx 6700 xt graphics card, 2x8gb vengeance ram at 3200mhz, a psu from nztx c-series delivering 750w, a gigabyte b550m motherboard, and an aorus elite board. today i started the ram diagnostic in windows 11 without finding any issues. the ram was configured with xmp in bios, cpu voltage set to -25 with power limits between 120-75-130, and the gpu showed undervoltage ranging from 1200 to 1100. temperatures remained stable throughout. bsod dumps.zip was attached for reference.

Makkro

01-07-2021, 02:25 PM #1

manglemadness
Member

117

01-26-2021, 03:29 AM

Identify the specific BSOD error you're encountering. Adjust the settings back to default or disable the undervolt protection and test if it resolves the problem.

manglemadness

01-26-2021, 03:29 AM #2

Identify the specific BSOD error you're encountering. Adjust the settings back to default or disable the undervolt protection and test if it resolves the problem.

101pate
Member

01-26-2021, 04:47 AM

Recent updates on AMD chipset drivers and the newest bios releases.

101pate

01-26-2021, 04:47 AM #3

Recent updates on AMD chipset drivers and the newest bios releases.

Kyaboy800
Member

202

01-26-2021, 06:18 AM

The most recent BIOS is already active, indicating the chipset is up to date.

Kyaboy800

01-26-2021, 06:18 AM #4

The most recent BIOS is already active, indicating the chipset is up to date.

Zeilia
Member

01-26-2021, 06:43 AM

ntoskrnl.exe + 42c280

Zeilia

01-26-2021, 06:43 AM #5

ntoskrnl.exe + 42c280

EmzOnToast
Junior Member

01-26-2021, 04:52 PM

It's failing due to a damaged hibernation file. Corruption in storage is likely the cause. Overfilling could also contribute.

EmzOnToast

01-26-2021, 04:52 PM #6

It's failing due to a damaged hibernation file. Corruption in storage is likely the cause. Overfilling could also contribute.

jameel1702
Member

01-27-2021, 08:31 AM

You don’t need to enable hibernation. To turn it off, look for the settings or options related to power management and disable the hibernation feature.

jameel1702

01-27-2021, 08:31 AM #7

You don’t need to enable hibernation. To turn it off, look for the settings or options related to power management and disable the hibernation feature.

troll316
Junior Member

01-28-2021, 01:20 PM

You might attempt this, though I’m uncertain about fully eliminating it given its current behavior in Windows.

troll316

01-28-2021, 01:20 PM #8

You might attempt this, though I’m uncertain about fully eliminating it given its current behavior in Windows.

Athenita
Member

164

02-01-2021, 09:14 PM

In cmd, PowerShell or terminal: Powercfg -h off. Use BlueScreenView and WhoCrashed. Skip XMP. Verify if your storage has firmware updates.

Athenita

02-01-2021, 09:14 PM #9

In cmd, PowerShell or terminal: Powercfg -h off. Use BlueScreenView and WhoCrashed. Skip XMP. Verify if your storage has firmware updates.

MisterMyth
Junior Member

02-02-2021, 04:02 PM

#10

attempted the cmd command which failed, indicating a thermal issue though the CPU never exceeded 85°C. The GPU remains stable with only minor hotspots. No firmware updates are available for storage.

MisterMyth

02-02-2021, 04:02 PM #10

attempted the cmd command which failed, indicating a thermal issue though the CPU never exceeded 85°C. The GPU remains stable with only minor hotspots. No firmware updates are available for storage.

Pages (2): 1 2 Next