F5F Stay Refreshed Hardware Desktop Issue with the PC failing to start despite corrected bent pins.

Issue with the PC failing to start despite corrected bent pins.

Issue with the PC failing to start despite corrected bent pins.

P
Pretzel_Sticks
Junior Member
Find
21
03-03-2023, 08:47 PM
#1
It began by changing my CPU to a different one. While doing that, I dropped it into the socket pins, which pushed the pin down. After fixing it, everything seemed normal except for the fan spinning without any sound or lights, and no display. My PSU is functioning properly. I’m looking for advice on how to resolve this issue. Did I fix the bent one?
Reply
Reply
P
Pretzel_Sticks
03-03-2023, 08:47 PM #1

It began by changing my CPU to a different one. While doing that, I dropped it into the socket pins, which pushed the pin down. After fixing it, everything seemed normal except for the fan spinning without any sound or lights, and no display. My PSU is functioning properly. I’m looking for advice on how to resolve this issue. Did I fix the bent one?

Reply
Reply
S
Sanic_Toaster
Junior Member
Find
42
03-03-2023, 11:19 PM
#2
What components are you considering? Motherboard and CPU.
Reply
Reply
S
Sanic_Toaster
03-03-2023, 11:19 PM #2

What components are you considering? Motherboard and CPU.

Reply
Reply
K
Krono
Junior Member
Find
48
03-04-2023, 04:15 PM
#3
I think the fixed pins aren't establishing proper connection with the LGA connector. There doesn't appear to be any broken pins, but it might be too shallow for good contact, which could be the problem.
Reply
Reply
K
Krono
03-04-2023, 04:15 PM #3

I think the fixed pins aren't establishing proper connection with the LGA connector. There doesn't appear to be any broken pins, but it might be too shallow for good contact, which could be the problem.

Reply
Reply
R
R_Piccini_360
Junior Member
Find
37
03-10-2023, 03:56 PM
#4
Have you checked it from every direction around the socket? I bent some pins earlier and it seemed okay from above, but from the side you noticed four bent pins. I ended up purchasing tweezers with a built-in magnifier and LED, aiming to get as close to the board as possible and examine it from all angles.
Reply
Reply
R
R_Piccini_360
03-10-2023, 03:56 PM #4

Have you checked it from every direction around the socket? I bent some pins earlier and it seemed okay from above, but from the side you noticed four bent pins. I ended up purchasing tweezers with a built-in magnifier and LED, aiming to get as close to the board as possible and examine it from all angles.

Reply
Reply
T
towwl
Member
Find
63
03-12-2023, 02:14 AM
#5
Your fan spins quickly and makes a loud noise, yet the screen remains inactive.
Reply
Reply
T
towwl
03-12-2023, 02:14 AM #5

Your fan spins quickly and makes a loud noise, yet the screen remains inactive.

Reply
Reply
D
DarkTiger427
Member
Find
186
03-28-2023, 09:53 AM
#6
Thanks for your assistance! I managed to resolve the issue by locating the bent pin and repairing it, then returning to my original CPU.
Reply
Reply
D
DarkTiger427
03-28-2023, 09:53 AM #6

Thanks for your assistance! I managed to resolve the issue by locating the bent pin and repairing it, then returning to my original CPU.

Reply
Reply