F5F Stay Refreshed Hardware Desktop Issue with RAM XMP profile not working – resolved.

Issue with RAM XMP profile not working – resolved.

Issue with RAM XMP profile not working – resolved.

M
MarissaGames
Member
Find
216
03-08-2018, 10:08 AM
#1
Hey everyone, just checking in about the Ryzen 2700 + MSI B450 gaming pro carbon with 16GB RAM and the 2x 8Gb Corsair Vengeance Pro 3200 MHz. I set the XMP profile and confirmed in BIOS it’s targeting 3200 MHz, but CPU-Z shows it’s running at the base spec of 2133 MHz. Any advice or suggestions would be greatly appreciated. Thanks!
Reply
Reply
M
MarissaGames
03-08-2018, 10:08 AM #1

Hey everyone, just checking in about the Ryzen 2700 + MSI B450 gaming pro carbon with 16GB RAM and the 2x 8Gb Corsair Vengeance Pro 3200 MHz. I set the XMP profile and confirmed in BIOS it’s targeting 3200 MHz, but CPU-Z shows it’s running at the base spec of 2133 MHz. Any advice or suggestions would be greatly appreciated. Thanks!

Reply
Reply
C
CoolJoe16
Junior Member
Find
49
03-21-2018, 06:30 PM
#2
Yes, manually adjusting it to 3200 usually works.
Reply
Reply
C
CoolJoe16
03-21-2018, 06:30 PM #2

Yes, manually adjusting it to 3200 usually works.

Reply
Reply
D
Dragongrl34
Junior Member
Find
43
03-29-2018, 12:37 PM
#3
manually setting didnt have effect either - heres cpuz screenshot Edited August 26, 2020 by andreweddy spelling
Reply
Reply
D
Dragongrl34
03-29-2018, 12:37 PM #3

manually setting didnt have effect either - heres cpuz screenshot Edited August 26, 2020 by andreweddy spelling

Reply
Reply
M
MilkIsAwesome
Member
Find
143
03-30-2018, 05:31 PM
#4
The newest bios are also implemented.
Reply
Reply
M
MilkIsAwesome
03-30-2018, 05:31 PM #4

The newest bios are also implemented.

Reply
Reply
I
iPeque
Member
Find
227
04-03-2018, 08:52 PM
#5
You might review the spd profiles as well. Consider updating the chipset drivers, configure the soc to 1.15 and dram to 1.35, then test with 2933. If successful, proceed with 3200. Also verify they are installed in slots 2 and 4.
Reply
Reply
I
iPeque
04-03-2018, 08:52 PM #5

You might review the spd profiles as well. Consider updating the chipset drivers, configure the soc to 1.15 and dram to 1.35, then test with 2933. If successful, proceed with 3200. Also verify they are installed in slots 2 and 4.

Reply
Reply
O
ostenvelez
Member
Find
241
04-04-2018, 09:33 AM
#6
In slots 2 and 4 – we'll test voltages and make updates. Appreciate the info; chipset drivers are up to date too.
Reply
Reply
O
ostenvelez
04-04-2018, 09:33 AM #6

In slots 2 and 4 – we'll test voltages and make updates. Appreciate the info; chipset drivers are up to date too.

Reply
Reply
M
MaddiBlake
Member
Find
241
04-04-2018, 11:05 AM
#7
Right then – sorry for the delay. I’ve been on annual leave and avoiding COVID for a while, so I tried a 1.15V, 1.35V, and manually adjusted the voltages to 2400/2666/2800/2933/3200. Every time it just restarted at the default 2133JEDEC speed – odd that changing settings didn’t help with the DRAM speed. I also tried XMP profiles for 2933 and 3200, plus many other tweaks, but nothing worked. I have a screenshot of the BIOS showing default settings when XMP is enabled, and CPUZ at the latest version. Still confused – it was running at 3200 before, now it’s stuck at 2133, but temperatures are fine and airflow is good in my Corsair 570X case. The system feels very stable, no crashes. Any advice would be appreciated – thanks!
Reply
Reply
M
MaddiBlake
04-04-2018, 11:05 AM #7

Right then – sorry for the delay. I’ve been on annual leave and avoiding COVID for a while, so I tried a 1.15V, 1.35V, and manually adjusted the voltages to 2400/2666/2800/2933/3200. Every time it just restarted at the default 2133JEDEC speed – odd that changing settings didn’t help with the DRAM speed. I also tried XMP profiles for 2933 and 3200, plus many other tweaks, but nothing worked. I have a screenshot of the BIOS showing default settings when XMP is enabled, and CPUZ at the latest version. Still confused – it was running at 3200 before, now it’s stuck at 2133, but temperatures are fine and airflow is good in my Corsair 570X case. The system feels very stable, no crashes. Any advice would be appreciated – thanks!

Reply
Reply