Issue with PC behaving differently after each restart.

Pages (2): 1 2 Next

Apel29
Member

192

04-15-2023, 01:33 PM

I've experienced this problem for a long time.
The PC behaves differently after almost every restart, shifting from sluggish mouse movement and laggy games to normal performance.
I'm curious about the possible causes and what areas I should examine to resolve this.
It's really annoying to have inconsistent mouse and PC responsiveness each time I play FPS games, especially since it makes it hard to maintain consistency.
Could there be a situation where a power supply of more than 750W could be contributing to these issues?
Here are my current specifications:
MOBO : B650 AORUS ELITE AX V1
CPU : RYZEN 5 7600X
RAM : 6000MHZ DDR5 KINGSTON FURY
GPU : RTX 4060
PSU : 750W PLATINUM BE QUIET
M2 : SAMSUNG 980 PRO AND SAMSUNG 980

Apel29

04-15-2023, 01:33 PM #1

TTGscopes
Junior Member

04-20-2023, 12:49 PM

I wouldn't assume a 4060 setup. Did you configure the PC with a fresh installation or attempt to start from an existing Windows version? In that case, a complete reinstall is recommended.

TTGscopes

04-20-2023, 12:49 PM #2

I wouldn't assume a 4060 setup. Did you configure the PC with a fresh installation or attempt to start from an existing Windows version? In that case, a complete reinstall is recommended.

carp3
Senior Member

572

04-20-2023, 04:58 PM

That's exactly what I assumed as well. The 4060 doesn't require much power.

carp3

04-20-2023, 04:58 PM #3

That's exactly what I assumed as well. The 4060 doesn't require much power.

MrBruninho
Junior Member

04-21-2023, 03:25 AM

I chose 5600mhz instead of 6000mhz and it works better, but sometimes it stutters or freezes. What adjustments could help fix this? Perhaps increasing the voltage slightly?

MrBruninho

04-21-2023, 03:25 AM #4

I chose 5600mhz instead of 6000mhz and it works better, but sometimes it stutters or freezes. What adjustments could help fix this? Perhaps increasing the voltage slightly?

deadlox123809
Junior Member

04-21-2023, 06:45 AM

Maybe reduce the RAM speed slightly.

deadlox123809

04-21-2023, 06:45 AM #5

Maybe reduce the RAM speed slightly.

Zephco
Member

04-21-2023, 02:54 PM

Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
EXPO Profile #1: DDR5-6000 CL36-38-38 @1.35V
EXPO Profile #2: DDR5-5600 CL36-38-38 @1.25V
XMP Profile #1: DDR5-6000 CL36-38-38 @1.35V
XMP Profile #2: DDR5-5600 CL36-38-38 @1.25V
Currently on EXPO Profile #2. What adjustments should I consider? I'm not very sure.

Zephco

04-21-2023, 02:54 PM #6

SmatMax
Junior Member

04-23-2023, 12:50 PM

I'm not very experienced with AM5. You might want to check your RAM specifications and choose something near those numbers.

SmatMax

04-23-2023, 12:50 PM #7

I'm not very experienced with AM5. You might want to check your RAM specifications and choose something near those numbers.

Dubbiestwubs
Member

04-23-2023, 02:11 PM

These are the ones, but I'm unsure about the right voltage adjustment. Perhaps reducing the frequency to 5400 would help?

Dubbiestwubs

04-23-2023, 02:11 PM #8

These are the ones, but I'm unsure about the right voltage adjustment. Perhaps reducing the frequency to 5400 would help?

Sfxdr
Junior Member

04-23-2023, 07:46 PM

I could attempt the configuration at 4800, then adjust gradually. However, typically I assume the RAM should clearly state its timing and voltage requirements on the label or packaging.

Sfxdr

04-23-2023, 07:46 PM #9

I could attempt the configuration at 4800, then adjust gradually. However, typically I assume the RAM should clearly state its timing and voltage requirements on the label or packaging.

Seabreeze1998
Member

04-23-2023, 09:45 PM

#10

It's likely safe to proceed with your current profile. I'm planning to test EXPO 1 at 5600mhz, as it matches the timing requirements and should work well.

Seabreeze1998

04-23-2023, 09:45 PM #10

It's likely safe to proceed with your current profile. I'm planning to test EXPO 1 at 5600mhz, as it matches the timing requirements and should work well.

Pages (2): 1 2 Next