F5F Stay Refreshed Power Users Networks Issue with network device (extremely slow response time)

Issue with network device (extremely slow response time)

Issue with network device (extremely slow response time)

Pages (2): 1 2 Next
K
Kutie2302
Junior Member
31
08-24-2023, 01:26 AM
#1
Hey, I see the issue. The slow loading times you're experiencing are likely due to your router's performance or network conditions. After testing multiple times, a consistent ping of around 1800ms suggests a problem with your connection or device. Try disconnecting other devices on the same network and see if the latency improves. Also, check if your modem is functioning properly or consider restarting it. Your TP-Link TL-WR841N should work fine, but external factors like interference or bandwidth limits might be affecting it.
K
Kutie2302
08-24-2023, 01:26 AM #1

Hey, I see the issue. The slow loading times you're experiencing are likely due to your router's performance or network conditions. After testing multiple times, a consistent ping of around 1800ms suggests a problem with your connection or device. Try disconnecting other devices on the same network and see if the latency improves. Also, check if your modem is functioning properly or consider restarting it. Your TP-Link TL-WR841N should work fine, but external factors like interference or bandwidth limits might be affecting it.

K
Komoomoo
Member
69
08-26-2023, 09:53 AM
#2
It could be adjusting settings, possibly involving a firewall or DNS. Did you receive any response when you linked your computer to the router and then sent a ping?
K
Komoomoo
08-26-2023, 09:53 AM #2

It could be adjusting settings, possibly involving a firewall or DNS. Did you receive any response when you linked your computer to the router and then sent a ping?

M
MineTurtel
Member
62
08-28-2023, 07:39 PM
#3
Checking connections through both Wi-Fi and wired links shows a latency of approximately 1800ms.
M
MineTurtel
08-28-2023, 07:39 PM #3

Checking connections through both Wi-Fi and wired links shows a latency of approximately 1800ms.

F
FlashAnimator
Member
101
08-30-2023, 10:29 AM
#4
DNS could be involved, or the router might be too busy handling connections. You can check with a speed test and run a ping from the command line to see if the issue persists.
F
FlashAnimator
08-30-2023, 10:29 AM #4

DNS could be involved, or the router might be too busy handling connections. You can check with a speed test and run a ping from the command line to see if the issue persists.

O
Omer_Akkas_V2
Junior Member
15
08-30-2023, 07:25 PM
#5
Treat it as a direct connection to the router rather than through it. For example, send a ping to 192.168.0.1.
O
Omer_Akkas_V2
08-30-2023, 07:25 PM #5

Treat it as a direct connection to the router rather than through it. For example, send a ping to 192.168.0.1.

T
Tenmyouji
Junior Member
34
09-06-2023, 02:46 PM
#6
Typically just a few times on the phone, but I switched to the command prompt on the PC afterward.
T
Tenmyouji
09-06-2023, 02:46 PM #6

Typically just a few times on the phone, but I switched to the command prompt on the PC afterward.

N
Niile
Junior Member
18
09-06-2023, 04:52 PM
#7
I apologize for the confusion, I’m not familiar with networks. The system timed out three requests to 192.168.0.1. No data was received. Ping stats show all packets sent and none returned, with a 100% loss rate. Response times varied between 1ms and 3ms.
N
Niile
09-06-2023, 04:52 PM #7

I apologize for the confusion, I’m not familiar with networks. The system timed out three requests to 192.168.0.1. No data was received. Ping stats show all packets sent and none returned, with a 100% loss rate. Response times varied between 1ms and 3ms.

S
Shimigaro90
Junior Member
37
09-07-2023, 02:20 PM
#8
1) launch command prompt
2) enter "ipconfig" and hit enter
3) identify the adapter you're connected to, record the default gateway (your router)
4) send a ping to your default gateway using "ping 192.168.x.x" with the appropriate number
5) view the results here – note: avoid capturing screenshots of ipconfig
S
Shimigaro90
09-07-2023, 02:20 PM #8

1) launch command prompt
2) enter "ipconfig" and hit enter
3) identify the adapter you're connected to, record the default gateway (your router)
4) send a ping to your default gateway using "ping 192.168.x.x" with the appropriate number
5) view the results here – note: avoid capturing screenshots of ipconfig

C
cookiedough909
Posting Freak
782
09-07-2023, 02:39 PM
#9
Here are the findings, the timing issues were my responsibility. I was connected to the modem during testing. The results below reflect the connection to the router. Pinging 192.168.0.1 with 32 bytes: Reply from 192.168.0.1: bytes=32 time=1ms TTL=64 Reply from 192.168.0.1: bytes=32 time=2ms TTL=64 Reply from 192.168.0.1: bytes=32 time=2ms TTL=64 Reply from 192.168.0.1: bytes=32 time=4ms TTL=64 Ping stats for 192.168.0.1: Packets Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times: Min = 1ms, Max = 4ms, Avg = 2ms
C
cookiedough909
09-07-2023, 02:39 PM #9

Here are the findings, the timing issues were my responsibility. I was connected to the modem during testing. The results below reflect the connection to the router. Pinging 192.168.0.1 with 32 bytes: Reply from 192.168.0.1: bytes=32 time=1ms TTL=64 Reply from 192.168.0.1: bytes=32 time=2ms TTL=64 Reply from 192.168.0.1: bytes=32 time=2ms TTL=64 Reply from 192.168.0.1: bytes=32 time=4ms TTL=64 Ping stats for 192.168.0.1: Packets Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times: Min = 1ms, Max = 4ms, Avg = 2ms

L
LucentRug3838
Junior Member
1
09-13-2023, 11:49 AM
#10
If the pin went high suddenly, it might mean an unauthorized person has taken control of the router and is scanning for weaker devices. Your router has several security flaws.
L
LucentRug3838
09-13-2023, 11:49 AM #10

If the pin went high suddenly, it might mean an unauthorized person has taken control of the router and is scanning for weaker devices. Your router has several security flaws.

Pages (2): 1 2 Next