Issue detected: Unstable network link causing device malfunctions.
Issue detected: Unstable network link causing device malfunctions.
I've experienced network problems for roughly two weeks now. Connectivity is inconsistent across all my devices. Some wired connections work, while others struggle. All wired devices seem to switch in and out frequently. Web pages load slowly or not at all. Downloads often stop midway through. Game pings change dramatically until they drop completely. Smart speakers frequently report issues or attempt to reconnect to Wi-Fi. Working computers achieve speeds between 300-350mb/s, whereas non-working ones get 100-250mb/s. ISP: Comcast Network Hardware Modem: Netgear CM1000 Router: tp-link TL-R600VPN Access Point: AC1750 Troubleshooting steps included: installing a brand new router and access point, resetting the modem several times, changing the router's Wi-Fi channel on Google DNS, testing an Ethernet connection to a previously wireless device. If anyone could assist in resolving this matter would be really appreciated. Comcast and technical support haven't provided much help so far.
Open 192.168.100.1 in a web browser. Review your signals section and examine your logs.
Your signals appear normal. The logs are intriguing but it's unclear what those numbers mean. Since some of your equipment is functioning, I'll focus on other aspects. The router you installed seems to be causing the same problems. Have there been any updates or additions to your network recently?
I noticed no significant changes in my setup. I own three computers and numerous smart home devices. Initially, I suspected a data transfer issue, but my router’s speed stats show no spikes. The functioning devices still experience occasional hiccups. At first, I thought it was a wireless-only concern, but testing a wired connection to one laptop didn’t resolve the problem. The only recent addition was a Nest doorbell, which I installed a few weeks prior to the issues starting.
If all the devices dont have issues at once then it has to be an internal issue some where. Just not sure where.
Have you rebooted the router recently? Are there any security tools active on it that could be using CPU power? For example, deep packet inspection or intrusion detection systems. Is a VPN connection enabled on the router? Have you considered resetting the firmware to its original settings? Have you installed the newest firmware version for your router?
I think I identified the problem. My brand new network switch T1600G-28PS wasn’t on my hardware list, and it was giving me error 501 when trying to access the admin panel. After connecting my access point directly to the router, everything worked again. I plan to reach out to TP-Link for assistance or a replacement.