Issue arises after a recent system update. Bluescreen appears during startup.
Issue arises after a recent system update. Bluescreen appears during startup.
you set up your ssd and installed windows 10 pro, but you encountered some blue screens. it looks like the problem might be with drivers—memtest86, memory test, and occt all reported no issues, yet memtest96+ flagged errors. since only one program detected faults and you checked each drive individually, the RAM issue seems unlikely. consider updating drivers or checking for hardware conflicts.
You have four newer bios files available for that board. Make sure to install the latest chipset driver first. Additionally, the Fresh W10 setup might require an update as well. Keep the firmware and software up to date, then perform some testing again. Good luck!
I haven't noticed Memtest returning with errors before. It seems the memory might be the issue. Consider reseating it or testing it with just one stick to check stability.
It also looks like memtest86+ indicates every single stick is faulty, which makes me really question if all four are indeed bad.
It will take some time to confirm if the single stick is stable. Try running it with one stick in regular use and check if it helps steady the machine. Also, when memory issues occur, the system assumes either faulty memory or improper board usage. It’s possible both problems exist, but neither is too costly to fix right now.
I tested five distinct memory test programs—AIDA64, OCCT, memtest86, and memtest86+. It’s strange that only memtest86+ consistently detected issues; I plan to run my RAM stock for a few days without overclocking or any other changes, just to see its baseline performance.
Only the RAM needs overclocking, I'm still confused since I ran the system at stock speed except for the 3733MHz RAM.