Is this slow boot or freezing issue related to your SSD?
Is this slow boot or freezing issue related to your SSD?
I'm trying to identify what might be causing the sluggish startup. Previously it was almost immediate, but now it takes about 10 to 20 seconds when the logo screen appears. After a brief disappearance, a loading symbol reappears, which sometimes freezes. If it doesn't freeze (around 60-70% of the time), it then waits another 15 to 20 seconds before reaching the login screen. Occasionally, the system starts but remains black with no sound, though peripherals are active. A forced reboot helps, but I suspect the issue is connected to the main problem.
The problem keeps happening more often, even when nothing seems to trigger it. A friend recommended checking the drive cables to see if a faulty boot drive is the cause; the same issue continued (though the SATA cables appear to be old, possibly all defective).
I reset the BIOS and it booted a bit faster, though not significantly. It still required two long startup screens. I ran CrystalDiskInfo and CrystalDiskMark, but I'm unsure how to interpret the results despite searching online for explanations.
Are these metrics normal or do they indicate the boot drive is failing? Could another factor be responsible for the slow start-up?
When sharing a troubleshooting thread, it's standard to provide complete system details. List your specifications as follows:
CPU:
CPU cooler:
Motherboard:
Ram:
SSD/HDD:
GPU:
PSU:
Chassis:
OS:
Monitor:
Include the PSU age along with its make and model. BIOS version for your motherboard at this time.
Attach a screenshot of the Disk Management view.
If your SSD controller is failing, it could clarify the issue you're experiencing, assuming your OS isn't compromised. Ensure you've saved any essential data from the SSD before attempting to repair your system and observe any changes.
I changed the details for you, sorry about that!
DM indicates the process involves using DISM and the System File Checker.
Ram: 32GB
This is the storage capacity. Could you confirm the brand and model of the RAM kit? You might want to run memtest for 10 cycles and check for any errors.
Power Supply: Thermaltake 850W
The device is from Thermaltake, with an advertised power rating of 850W. We need the exact model number.
BIOS Information: American Megatrends Inc. 3002, dated 2/23/2023
https://www.asus.com/motherboards-c..._b...US-WIFI-II
According to the support page for your motherboard, there are pending BIOS updates. It would be wise to verify you have the most recent chipset drivers for your system (from AMD or Asus) and then update the BIOS accordingly.
Storage Options: 500gb Samsung Evo (boot drive), 1TB Crucial SSD, 2TB Seagate HDD
You may want to try removing both the Crucial drive and the Seagate HDD to test boot time impact. While doing so, use Samsung's Magician App to check for any pending firmware updates on the SSD.
Is the DISM tool and System File Checker currently running?
Yes, and typically this is referred to as SFC.
My previous PSU failed, destroying my last assembly. Did you replace it with a new unit?
Is the optimization tool activated on the boot disk? You may wish to perform some basic cleanup and release an additional 20+GB of available space.
The only changes made were two RAM modules and the HDD/boot SSD, along with the chassis. The latest SSD was installed about two years ago. Until recently, I experienced slow boot times, but everything was working properly when we tested the RAM at first. I was a bit surprised that both drives remained functional despite my motherboard and CPU being non-functional.
The power supply is a Thermaltake Toughpower GF1 850W 80+ Gold unit. The RAM includes two GeIL Super Luce RGB SYNC sticks, each 8GB (16GB total), using DDR4 3000 speed. The newer ones are G.Skill Trident Z, 8GB each (product number F4-3200C16-8GVKB). The Crucial drive is a BX500 model. I plan to update the BIOS and use Samsung Magician for further checks. Thank you for your help.