Is this overclock right?
Is this overclock right?
I have a Ryzen 3 2200g, a B350M Mortar motherboard and a G.Skill Ripjaws V 2400 mhz 16gb dual kit. I’m unsure if my actions are safe since this is my first time setting up this system.
I left my CPU on auto with its voltage settings intact.
I adjusted the integrated graphics to 1500mhz without changing any BIOS settings, then overclocked the RAM from 2400 mhz to 2933 with a 1.35v boost (also in BIOS).
My temperatures are between 35-40°C when idle and 59-65°C during games.
I’m asking whether it’s acceptable to keep things set automatically or if I should manually adjust the voltages.
It's fine to leave them on auto. You can adjust it with adaptive voltage and a negative offset to lower the temperature slightly. This is typically done to manage heat. Now, try prime95 (blend mode) or AIDA64 (tools > system stability test). Keep an eye on your temperatures; if they stay below 85°C, you might be able to overclock your CPU further. If it crashes, it's likely due to instability, possibly from RAM. If you hit 90°C, stop overclocking. Also, for gamers, consider purchasing a good second-hand graphics card with a long return period to test. You'll gain more from a dedicated GPU.
It's fine to keep them on auto. You can adjust it with adaptive voltage and a negative offset to lower the temperature slightly. This is typically done to manage heat levels.
Now, try prime95 (blend mode) or AIDA64 (tools > system stability test). Keep an eye on your temperatures; if they stay below 85°C, you might be able to overclock your CPU further. If it crashes, it could indicate instability, likely due to RAM. If you hit 90°C, stop overclocking immediately.
For gamers, investing in a good second-hand graphics card with a long return period is recommended. This will give you better results with a dedicated GPU.
Here are some useful links:
http://gpu.userbenchmark.com/Compare/AMD...2vsm441833
https://www.ebay.com/sch/i.html?_from=R4...itleDesc=0
http://gpu.userbenchmark.com/Compare/Nvi...9vsm441833
https://www.ebay.com/sch/i.html?_from=R4...itleDesc=0
Zebarjadi.raouf:
It's fine to leave them on auto. You can adjust it with adaptive voltage and apply a negative offset to lower it slightly. This is typically done to manage temperatures.
Next, try prime95 (blend mode) or AIDA64 (Tools > System Stability Test). Keep an eye on your temperatures; if they stay below 85°C, you might be able to overclock the CPU further. If you experience crashes, it could indicate instability—possibly due to RAM. At around 90°C, avoid overclocking.
For gamers, consider purchasing a good second-hand graphics card with a long return period to test. You'll gain more from a dedicated GPU.
Here are some links for comparison:
http://gpu.userbenchmark.com/Compare/AMD...2vsm441833
https://www.ebay.com/sch/i.html?_from=R4...itleDesc=0
http://gpu.userbenchmark.com/Compare/Nvi...9vsm441833
https://www.ebay.com/sch/i.html?_from=R4...itleDesc=0
Also, it seems your BIOS doesn't have an offset setting.
Lastly, regarding the default CPU voltage—I think I don’t have that information. Since the GPU might be limiting performance, you could consider lowering the clock speed slightly to save power.
And about the graphics card, if you can afford it, go for the models mentioned in the links when you have the budget. Thank you for the advice.
CPUs configured as auto adjust voltage, changing it based on workload. There isn't a fixed "default voltage." At maximum settings, your CPU consumes around 65W, and even with heavy overclocking, it would reach about 100W. The variation is minimal unless you're running demanding tasks for extended periods. If you're worried, consider setting your power plan to balanced mode in the power options menu. You might find the article helpful: http://www.guru3d.com/articles-pages/amd...ew,34.html. For a strong system, especially with good RAM, investing in a GPU is recommended. Second-hand GPUs can be found at a fraction of their original cost. Use the reference site: http://gpu.userbenchmark.com for guidance. Aim for a GPU with at least 2GB of VRAM, preferably 3 or 4.
Zebarjadi.raouf:
CPUs configured as auto adjust voltage dynamically, changing it based on workload. There isn't a fixed "default voltage." Also, your CPU's maximum power at default is 65W, and even with heavy overclocking it would consume around 100W. The difference is minimal unless you're running demanding tasks for extended periods.
You may want to choose a balanced power plan in the power options if you're worried about efficiency.
For more details, check: http://www.guru3d.com/articles-pages/amd...ew,34.html
Your system looks solid (great RAM too), so investing in a GPU would be wise. Second-hand units can be found at less than a third of their cost. Use: http://gpu.userbenchmark.com
Preferably opt for a model with at least 2GB of VRAM (3 or 4 is ideal).
Appreciate the assistance!