F5F Stay Refreshed Power Users Overclocking Is it Stable?

Is it Stable?

Is it Stable?

C
CelticTitan14
Junior Member
4
10-08-2016, 09:25 AM
#1
I'm looking for ways to optimize my GTX 1060 performance. I'm currently using the settings shown in the screenshot. I'm interested in reducing the voltage but before making changes, I have a few observations. When I set it to +150 on the core, the GPU clock reads 2151mhz. After a while it drops to 2138mhz and stays there during testing. After about an hour of sitting, it hasn't changed. I've also tried lower clock offsets and the same issue occurs. For example, @+125 offset @2126mhz drops to @2113, and @+2100 offset drops to @2088mhz. Is this typical behavior? Any advice would be appreciated.
C
CelticTitan14
10-08-2016, 09:25 AM #1

I'm looking for ways to optimize my GTX 1060 performance. I'm currently using the settings shown in the screenshot. I'm interested in reducing the voltage but before making changes, I have a few observations. When I set it to +150 on the core, the GPU clock reads 2151mhz. After a while it drops to 2138mhz and stays there during testing. After about an hour of sitting, it hasn't changed. I've also tried lower clock offsets and the same issue occurs. For example, @+125 offset @2126mhz drops to @2113, and @+2100 offset drops to @2088mhz. Is this typical behavior? Any advice would be appreciated.

X
XaViZ
Member
197
10-08-2016, 04:57 PM
#2
When checking the stability of my graphics card's overclock, I often use tools like heaven or valley benchmark. If unusual patterns appear on the screen—such as strange lines or color flashes—it usually means the setup isn't working properly. In that case, I reduce the overclock or raise the voltage until the issue disappears. Another sign is if the PC crashes during benchmarking or if performance drops significantly at higher overclocks. Every card behaves differently, so what works for one might not work for another.
X
XaViZ
10-08-2016, 04:57 PM #2

When checking the stability of my graphics card's overclock, I often use tools like heaven or valley benchmark. If unusual patterns appear on the screen—such as strange lines or color flashes—it usually means the setup isn't working properly. In that case, I reduce the overclock or raise the voltage until the issue disappears. Another sign is if the PC crashes during benchmarking or if performance drops significantly at higher overclocks. Every card behaves differently, so what works for one might not work for another.

D
Dj_104
Member
202
10-10-2016, 06:37 AM
#3
When checking if the overclock on my graphics card works well, I use tools like heaven or valley benchmark. If you notice strange things on the screen—like lines or flashing colors—it usually means the stability is poor. Then I either lower the overclock or raise the voltage until it improves. Another sign is if your PC crashes during a benchmark or if performance drops at higher overclocks. Every card behaves differently, so some can handle more overclock than others.
D
Dj_104
10-10-2016, 06:37 AM #3

When checking if the overclock on my graphics card works well, I use tools like heaven or valley benchmark. If you notice strange things on the screen—like lines or flashing colors—it usually means the stability is poor. Then I either lower the overclock or raise the voltage until it improves. Another sign is if your PC crashes during a benchmark or if performance drops at higher overclocks. Every card behaves differently, so some can handle more overclock than others.

I
iShadow28
Junior Member
13
10-10-2016, 08:14 AM
#4
Additionally, some recommendations begin at a lower overclock setting and gradually raise it while maintaining stability. If issues appear, boost the voltage until problems disappear. Keep pushing the overclock further (if needed) until artifacts reappear, then adjust the voltage again. Repeat this process until you reach a satisfactory setting or no more voltage is available.
I
iShadow28
10-10-2016, 08:14 AM #4

Additionally, some recommendations begin at a lower overclock setting and gradually raise it while maintaining stability. If issues appear, boost the voltage until problems disappear. Keep pushing the overclock further (if needed) until artifacts reappear, then adjust the voltage again. Repeat this process until you reach a satisfactory setting or no more voltage is available.

T
TryHardMikel
Member
172
10-10-2016, 10:06 AM
#5
These responses were really useful. I haven't noticed anything unusual during testing in both valley or heaven. Based on the screenshot I shared, did I receive a decent card? lol
T
TryHardMikel
10-10-2016, 10:06 AM #5

These responses were really useful. I haven't noticed anything unusual during testing in both valley or heaven. Based on the screenshot I shared, did I receive a decent card? lol

B
Bosskj
Member
100
10-12-2016, 06:46 AM
#6
I'm not familiar with all the standard card speeds or overclocking rates, but a 150mhz boost represents a solid improvement.
B
Bosskj
10-12-2016, 06:46 AM #6

I'm not familiar with all the standard card speeds or overclocking rates, but a 150mhz boost represents a solid improvement.