F5F Stay Refreshed Hardware Desktop Invalid function solution for Micron P320h/P420m PCIe SSD

Invalid function solution for Micron P320h/P420m PCIe SSD

Invalid function solution for Micron P320h/P420m PCIe SSD

D
Daniel244
Junior Member
Find
14
09-11-2025, 12:21 AM
#1
Here is a rewritten version of your text:

To anyone who might need this later: I got one of these cards from eBay and when I attempted to split it in Windows Disk Management, I encountered an Invalid Function error. Regardless of what I tried in Windows, it either failed to load the RealSSD Manager with no drives visible or simply froze. I tested both UEFI and Legacy BIOS setups, using Windows 7, 10, and 11 on each. The next step was switching to Linux. After some research, I managed to resolve the issue through these steps:

1. Obtain the driver files – I downloaded versions from www.touslesdrivers.com (version 145.07.00 for both Windows and Linux).
2. Install Ubuntu Linux – Followed installation prompts, choosing version 14.04.6 which may work with newer systems or other Debian/Fedora distributions.
3. Transfer the Ubuntu installer to a USB drive.
4. Boot from the USB and install the RealSSD Manager from the Linux driver folder.
5. After setup, you’ll likely see a rebuild warning about needing a secure erase.
6. Select Secure Erase, enter the password (it was "ffff").
7. The drive will prompt to sanitize it; if not, it may become write-protected until the process finishes.
8. Once done, choose to sanitize through RealSSD Manager.

After this, the drive should appear green and ready for use. Optional steps include preconditioning the drive per performance guidelines, which can improve speed but may cause a temporary slowdown. For detailed instructions, refer to Micron’s optimization guide.

Flashing the firmware is usually straightforward, though it carries risk. If you encounter STATUS_CODE 51 (often linked to IBM cards), you might need to use a low-level tool like hddguru.com to condition the drive. Firmware updates are available via the RealSSD Manager, but some guides lack clear details.

If you're comfortable, you can manually flash the card using the firmware file provided. This method has received mixed feedback online, with some users reporting success and others facing issues.

Commands for Linux:
- `./rssdm -L` – Displays your drive number.
- `./rssdm -T /path/to/your/firmware/B145.07.00+UEFI.ubi -n <number> -f` – Forces flash with the standard firmware.

For Windows, you can use:
- `dd if=/dev/zero of=/dev/rssd<x> oflag=direct bs=1M` to precondition the drive (requires knowing your device path).

This process can take time and may need trial and error. Keep in mind that after a secure erase, you must sanitize and condition the drive properly to avoid performance loss. If you have more questions, feel free to ask.
Reply
Reply
D
Daniel244
09-11-2025, 12:21 AM #1

Here is a rewritten version of your text:

To anyone who might need this later: I got one of these cards from eBay and when I attempted to split it in Windows Disk Management, I encountered an Invalid Function error. Regardless of what I tried in Windows, it either failed to load the RealSSD Manager with no drives visible or simply froze. I tested both UEFI and Legacy BIOS setups, using Windows 7, 10, and 11 on each. The next step was switching to Linux. After some research, I managed to resolve the issue through these steps:

1. Obtain the driver files – I downloaded versions from www.touslesdrivers.com (version 145.07.00 for both Windows and Linux).
2. Install Ubuntu Linux – Followed installation prompts, choosing version 14.04.6 which may work with newer systems or other Debian/Fedora distributions.
3. Transfer the Ubuntu installer to a USB drive.
4. Boot from the USB and install the RealSSD Manager from the Linux driver folder.
5. After setup, you’ll likely see a rebuild warning about needing a secure erase.
6. Select Secure Erase, enter the password (it was "ffff").
7. The drive will prompt to sanitize it; if not, it may become write-protected until the process finishes.
8. Once done, choose to sanitize through RealSSD Manager.

After this, the drive should appear green and ready for use. Optional steps include preconditioning the drive per performance guidelines, which can improve speed but may cause a temporary slowdown. For detailed instructions, refer to Micron’s optimization guide.

Flashing the firmware is usually straightforward, though it carries risk. If you encounter STATUS_CODE 51 (often linked to IBM cards), you might need to use a low-level tool like hddguru.com to condition the drive. Firmware updates are available via the RealSSD Manager, but some guides lack clear details.

If you're comfortable, you can manually flash the card using the firmware file provided. This method has received mixed feedback online, with some users reporting success and others facing issues.

Commands for Linux:
- `./rssdm -L` – Displays your drive number.
- `./rssdm -T /path/to/your/firmware/B145.07.00+UEFI.ubi -n <number> -f` – Forces flash with the standard firmware.

For Windows, you can use:
- `dd if=/dev/zero of=/dev/rssd<x> oflag=direct bs=1M` to precondition the drive (requires knowing your device path).

This process can take time and may need trial and error. Keep in mind that after a secure erase, you must sanitize and condition the drive properly to avoid performance loss. If you have more questions, feel free to ask.

Reply
Reply