F5F Stay Refreshed Hardware Desktop Installing another HDD caused an unusual event to occur.

Installing another HDD caused an unusual event to occur.

Installing another HDD caused an unusual event to occur.

S
SirTabbi
Member
58
05-23-2023, 03:22 AM
#1
I followed these steps: powered down the PC, unplugged everything, cleaned it, installed a new HDD, connected the right cords properly, reassembled everything, restarted it, and finally opened a browser. When I turned it back on, the desktop appeared and I was able to access it. Then the PC shut off and the motherboard showed 00. I’m still confused about what happened.
S
SirTabbi
05-23-2023, 03:22 AM #1

I followed these steps: powered down the PC, unplugged everything, cleaned it, installed a new HDD, connected the right cords properly, reassembled everything, restarted it, and finally opened a browser. When I turned it back on, the desktop appeared and I was able to access it. Then the PC shut off and the motherboard showed 00. I’m still confused about what happened.

K
Koutasensei
Junior Member
14
05-24-2023, 02:27 PM
#2
Take a marker and place a 7 at the end. If this didn’t help, refer to the manual and clarify the code. Please let me know.
K
Koutasensei
05-24-2023, 02:27 PM #2

Take a marker and place a 7 at the end. If this didn’t help, refer to the manual and clarify the code. Please let me know.

H
Hingodu
Member
56
06-11-2023, 05:09 PM
#3
What kind of motherboard do you have? I understand that an ASUS model with code 00 indicates an issue with the CPU. You might reset the BIOS by either jumping the pins or pressing the designated button, depending on your specific board. If this doesn't resolve it, remove the CMOS battery for a few minutes, then reinstall it and attempt the reset again.
H
Hingodu
06-11-2023, 05:09 PM #3

What kind of motherboard do you have? I understand that an ASUS model with code 00 indicates an issue with the CPU. You might reset the BIOS by either jumping the pins or pressing the designated button, depending on your specific board. If this doesn't resolve it, remove the CMOS battery for a few minutes, then reinstall it and attempt the reset again.

H
hugsrocks
Member
106
06-13-2023, 12:06 PM
#4
I've replaced my CPU, GPU, and reset the BIOS. The next step would be to take out the CMOS battery and reinsert it. My CPU seemed okay and there were no bent pins visible.
H
hugsrocks
06-13-2023, 12:06 PM #4

I've replaced my CPU, GPU, and reset the BIOS. The next step would be to take out the CMOS battery and reinsert it. My CPU seemed okay and there were no bent pins visible.