Installation guide for 5800x device
Installation guide for 5800x device
Need assistance switching from a 3600 to a 5800x setup. The current configuration is as follows: CPUs range from 3600 to 5800x, motherboard is Strix B550-i, GPU is 4070Ti, Gigabyte PSU has a 750W TDP, two M.2 Samsung drives, and a 32GB Kingston 3200 RAM kit (two 16GB sticks). Initially, the 5800x was installed and it worked fine—perfect performance. The motherboard confirmed Ryzen 5000 compatibility. After installation, the system booted normally but displayed a black screen. The RGB cooler activated, fans spun, and the blue LED blinked every two seconds. I attempted several fixes: reinserting the CPU, reseating RAM sticks (both at once and individually), trying without RAM, and even using an older CPU. Still no improvement. Eventually, I flashed a newer BIOS via USB (fat32 format) and updated through the BIOS menu. The board recognized the latest BIOS, but the 5800x still wouldn’t boot properly—especially when paired with the original CPU. It would enter Windows smoothly but stuttered heavily, freezing games to about one frame and causing lag in Discord audio. The GPU ran fine with a PCIe 3 cable, but I haven’t removed everything to test a direct GPU connection yet. I’m planning to try again today. I really hope this upgrade brings noticeable gains—especially for the extra cores—and want any tips or advice to get it working smoothly. Even if I have to stick with the 3600, I need to be able to hit 200fps in games again. This setup shouldn’t drop to 1fps in action now that the CPU was removed.
The BIOS update likely fixed the issue with the 5800X CPU, but now even your older 3600 model isn’t functioning properly. It’s possible the pins are bent or damaged from repeated reseating.
All the pins remain in their original positions. I'm quite cautious and placed them carefully without fully closing the latch, repeating the process about four times for each CPU to make sure they're properly seated. Once done, I also verified the pins again.
As mentioned earlier, reset the CMOS. After connecting only the boot drive, start the PC and install the updated chipset drivers. Once everything functions properly, power down the system, reset the CMOS once more, and install the new CPU. Allow some time for Windows to initialize, then reinstall the drivers again. If you still face issues after these steps, the CPU might be damaged—consider returning it for a refund.