installation failed because the SSD isn't showing up on the partition list.
installation failed because the SSD isn't showing up on the partition list.
You're encountering an issue where the USB installation wizard only displays your HDD, not the SSD. Since you already have Windows pre-installed on the SSD, you'll need to format it properly before installing a fresh Windows 10. Here’s how you can proceed:
1. **Identify the SSD partition** – Use Disk Management to see which partition is recognized as the SSD.
2. **Format the SSD** – Select the correct partition and format it with a suitable file system (e.g., FAT32 or NTFS).
3. **Create a bootable USB drive** – Use tools like Rufus or Windows USB/DVD Installer to create a bootable USB from the formatted SSD.
4. **Install fresh Windows 10** – Insert the USB and follow the installation prompts, selecting the correct partition for Windows installation.
If you need further help with any step, let me know!
You might need a boot-start driver installed or you could try adjusting the drive settings. Check if it appears in DiskPart during setup. If found, remove and reformat it. If not visible, identify the correct drivers to install. Also, before replacing your old 10, ensure you back up your key.
The SSD is functioning properly, Windows runs smoothly on it, and it boots each time. You're looking for a simpler installation method, like a standard fresh setup. There are different ways to install Windows on an SSD.
Typically, the issue arises when a SATA controller (or M.2 drive) isn't recognized by Windows 10. You'll usually see a message indicating it can't find the drive and an option to install the driver. To resolve this, download the corresponding *.inf SATA controller drivers or motherboard chipset from the manufacturer's website. Move the files onto a USB flash drive and save them in a new folder—name it however you prefer. It’s crucial to extract the drivers onto the USB before using it. Restart your system and boot from the USB drive, ensuring UEFI mode is selected. You’ll see options like "<flash drive make and model>" or "UEFI: <flash drive make and model>". Select the correct path for the SATA controller files. In Windows setup, when the drive isn’t found, choose "Load Drivers" and browse to your USB drive. Locate the *.inf file and follow the instructions to install it. After completion, the drive should appear in Windows.