Initialize new build without output display.
Initialize new build without output display.
I adjusted the setup and it still didn’t work. Both units were faulty. This is my initial attempt, and it’s making me lose hope. Note: Asus Prime H150M-E CPU: Intel core i5 11400F RAM: 32GB patriot viper steel (2 x 16GB) SSD: WD black 500GB with generic heatsink GPU: ASUS dual RTX 3050 PSU: EVGA 80+ gold 600W 27" Samsung curved monitor Case: Corsair 4000D airflow. The system powers on but nothing appears on the screen. I switched HDMI cables and confirmed they’re connected to the GPU. The 24-pin connector fits properly, CPU fan is in place, and all cables are secured. Audio and power reset the LED correctly. USB 3.2 is connected, but no RGB headers are attached. I’m certain all components fit. Standoffs are positioned correctly under the motherboard. My keyboard and mouse remain inactive when plugged into any USB port, though power reaches them. I’ve reset CMOS, removed battery, reinserted GPU and RAM, tested both sticks separately, cleaned CPU, reapplied thermal paste, verified monitor connection and HDMI. I rebuilt the board with essentials outside the case but still faced issues. I’ve reassembled it multiple times without improvement since noon yesterday. No bent pins, only CPU cooler and thermal paste intact. Windows 10 is installed on a flash drive, but BIOS won’t load. I’ve been working nonstop for 14 hours with no success. Help would be invaluable. Thanks, Edited July 6, 2022 – Sumitatsu
Do you have an alternative GPU available for testing? (We're just checking if the GPU is the issue, not the whole setup.)
This strange problem seems to stem from compatibility settings. If everything works fine, the main issue might be related to CSM configuration. To turn it off, you’d need a PCIe Gen 3 GPU or a CPU with IGPU support. Returning your components would help—start with the CPU if possible. Consider a non-full version if the performance gap isn’t critical. If you have nearby repair shops, contact them to check availability of GPUs and CPUs; they likely carry these items but may vary on pricing.
Is it starting up or just turning on? Are there diagnostic lights visible? I don’t think it’s the H150M-E board, I assume it’s the 510 model. I’ve tried using any RAM installed in the slots. These are old parts, haven’t they been purchased recently? It might be faulty, so I’d consider returning them via RMA. Since I can’t say for sure, testing with another RAM or CPU would be best. If you need to get help, check what the board says when it powers up.
It seems like you're feeling like you might have to start over or return something.
The listing mentions ASUS, and it looks like it was released last year, so it shouldn't be outdated. The product page shows no LEDs or speakers, which might help when trying to recover the device. I plan to attempt a return and check the outcome. Also, I've tested RAM sticks separately without success.
it's a basic fixer to link with your motherboard. plug into the pins next to the power switch and the led hdd led. check the guide for details.