Initial Custom Loop, is the air contained within it?
Initial Custom Loop, is the air contained within it?
Hello everyone, two days ago I completed assembling my first custom loop. After about half an hour of use, I observed condensation forming inside the loop near the Res and monoblock area. I would seek advice from more experienced individuals to confirm whether this is normal or if these micro bubbles are trapped air. I’m unsure if it’s beneficial, but I did use a pastel liquid—specifically a pastel nano liquid from Mayhems. Before assembling, I flushed the radiators with distilled water and white vinegar. After putting everything together, I performed a leak test using distilled water. When I placed the liquid inside the loop, some distilled water entered the radiators and mixed in. Below are the images: http://http:// Also, I’ve noticed that the level of liquid in the Res drops very slowly, as if the loop is absorbing it in small amounts. Thank you very much ahead of time and sorry for my English, which isn’t my first language.