F5F Stay Refreshed Hardware Desktop I7 4790K performance boost Overclocking tips and results for this processor

I7 4790K performance boost Overclocking tips and results for this processor

I7 4790K performance boost Overclocking tips and results for this processor

Pages (2): 1 2 Next
G
190
04-24-2017, 03:13 PM
#1
I understand this component is quite outdated, but I'm aiming to boost its speed. So far, I've only run stress tests on the CPU for around four hours. The processor is an Intel i7 4790k with a cooler from Cooler Master Hyper 212, paired with an XFX RX 580 GTS XXX GPU and 8GB of RAM. The motherboard is Gigabyte GA - Z97MX Gaming, and the PSU is Corsair CSM 650W, which meets 80+ Gold standards. The system runs with 1600MB of memory.
G
gustavbengters
04-24-2017, 03:13 PM #1

I understand this component is quite outdated, but I'm aiming to boost its speed. So far, I've only run stress tests on the CPU for around four hours. The processor is an Intel i7 4790k with a cooler from Cooler Master Hyper 212, paired with an XFX RX 580 GTS XXX GPU and 8GB of RAM. The motherboard is Gigabyte GA - Z97MX Gaming, and the PSU is Corsair CSM 650W, which meets 80+ Gold standards. The system runs with 1600MB of memory.

I
Ivanko
Junior Member
48
04-24-2017, 10:26 PM
#2
According to memory, performance should reach around 4.8 ghz at approximately 1.3v.
I
Ivanko
04-24-2017, 10:26 PM #2

According to memory, performance should reach around 4.8 ghz at approximately 1.3v.

F
Fritztech
Member
218
04-24-2017, 11:55 PM
#3
F
Fritztech
04-24-2017, 11:55 PM #3

C
109
05-16-2017, 11:40 AM
#4
With XMP turned off
C
CapnCrunchz559
05-16-2017, 11:40 AM #4

With XMP turned off

J
jellyThePro
Member
105
05-16-2017, 01:30 PM
#5
Turn off XMP and adjust your memory settings directly.
J
jellyThePro
05-16-2017, 01:30 PM #5

Turn off XMP and adjust your memory settings directly.

S
silvertooth98
Member
181
05-18-2017, 03:19 AM
#6
I had a great run, managing 4.7 with just 1.2 volts on my 4790K. Even though such low voltage isn't typical, using an 212 evo helped keep things stable and temperatures under control. My readings stayed below 70 after a long stress test.
S
silvertooth98
05-18-2017, 03:19 AM #6

I had a great run, managing 4.7 with just 1.2 volts on my 4790K. Even though such low voltage isn't typical, using an 212 evo helped keep things stable and temperatures under control. My readings stayed below 70 after a long stress test.

P
PassTheBass
Junior Member
41
05-26-2017, 09:10 AM
#7
It's great you're asking! For someone just starting with overclocking, focus on stability first. Begin with a memory speed that matches your CPU's requirements and aim for a stable clock speed. Timing should be consistent—start with the manufacturer's recommended settings and adjust gradually.
P
PassTheBass
05-26-2017, 09:10 AM #7

It's great you're asking! For someone just starting with overclocking, focus on stability first. Begin with a memory speed that matches your CPU's requirements and aim for a stable clock speed. Timing should be consistent—start with the manufacturer's recommended settings and adjust gradually.

C
CHACOS
Member
64
05-26-2017, 02:00 PM
#8
Use tools to check current settings and type them directly into the BIOS. CPU-Z provides timing details, while HWInfo shows most of them.
C
CHACOS
05-26-2017, 02:00 PM #8

Use tools to check current settings and type them directly into the BIOS. CPU-Z provides timing details, while HWInfo shows most of them.

I
iMiner2013
Junior Member
42
05-26-2017, 08:31 PM
#9
Best possible speed is achievable, though I haven’t faced issues with 1600 CL14, so don’t expect much if you can’t match it.
I
iMiner2013
05-26-2017, 08:31 PM #9

Best possible speed is achievable, though I haven’t faced issues with 1600 CL14, so don’t expect much if you can’t match it.

M
Mrnelson2003
Member
75
06-01-2017, 10:31 PM
#10
Thank you!
M
Mrnelson2003
06-01-2017, 10:31 PM #10

Thank you!

Pages (2): 1 2 Next