F5F Stay Refreshed Power Users Overclocking i7 4770k is unstable at 4.2GHz, assistance required

i7 4770k is unstable at 4.2GHz, assistance required

i7 4770k is unstable at 4.2GHz, assistance required

Pages (2): Previous 1 2
B
blackceaser
Member
119
10-27-2016, 10:40 PM
#11
others struggle with achieving those speeds and voltages, especially with the Haswell chip. I managed to hit 4.5ghz at a lower voltage, but pushing past 4.6ghz proved difficult. I could reach 4.4 at 1.26v, but anything higher would require even more voltage, which isn't feasible for me.
B
blackceaser
10-27-2016, 10:40 PM #11

others struggle with achieving those speeds and voltages, especially with the Haswell chip. I managed to hit 4.5ghz at a lower voltage, but pushing past 4.6ghz proved difficult. I could reach 4.4 at 1.26v, but anything higher would require even more voltage, which isn't feasible for me.

C
Cloud_1
Junior Member
14
10-28-2016, 12:33 AM
#12
Karadjgne shared their experience with the 4770k model. They reset the BIOS to defaults, kept everything on auto, and adjusted the multiplier to 42. Intel provides sufficient voltage to achieve this without altering other parameters. Adjustments become necessary only when aiming for speeds above 4.3GHz or faster, at which point tweaking LLC or voltage/current settings is required. If temperatures remain elevated, gradually reduce the vcore by 0.08v. Their 3570k stays at a maximum of 4.3GHz with 1.08v, while the 3770k reached 4.9GHz at 1.32v despite lower voltages. Currently, they're at 4.6GHz with 1.208v and a slight increase in LLC and 10% amperage. Researching OC results suggests general principles apply, though component names vary by board and BIOS. Many Intel OC guides are available, and they confirmed their results without changing other settings except the multiplier. At idle, temperatures were low (30-38), but a brief FFT test showed a significant spike to 87-100. They questioned the effectiveness of such a simple OC with a decent air cooler, noting the auto voltage setting kept them at 1.184 and only a minor voltage bump was observed.
C
Cloud_1
10-28-2016, 12:33 AM #12

Karadjgne shared their experience with the 4770k model. They reset the BIOS to defaults, kept everything on auto, and adjusted the multiplier to 42. Intel provides sufficient voltage to achieve this without altering other parameters. Adjustments become necessary only when aiming for speeds above 4.3GHz or faster, at which point tweaking LLC or voltage/current settings is required. If temperatures remain elevated, gradually reduce the vcore by 0.08v. Their 3570k stays at a maximum of 4.3GHz with 1.08v, while the 3770k reached 4.9GHz at 1.32v despite lower voltages. Currently, they're at 4.6GHz with 1.208v and a slight increase in LLC and 10% amperage. Researching OC results suggests general principles apply, though component names vary by board and BIOS. Many Intel OC guides are available, and they confirmed their results without changing other settings except the multiplier. At idle, temperatures were low (30-38), but a brief FFT test showed a significant spike to 87-100. They questioned the effectiveness of such a simple OC with a decent air cooler, noting the auto voltage setting kept them at 1.184 and only a minor voltage bump was observed.

C
Cxppe
Member
117
10-28-2016, 02:21 AM
#13
Between 3.5 and 4.2 isn't a major overclock, a 20% boost shouldn't be ignored. Also, 1.3V is quite high and could cause significant heat.
C
Cxppe
10-28-2016, 02:21 AM #13

Between 3.5 and 4.2 isn't a major overclock, a 20% boost shouldn't be ignored. Also, 1.3V is quite high and could cause significant heat.

A
AdamKoudy
Senior Member
740
10-28-2016, 11:10 AM
#14
Dragos Manea explains the situation, noting that a 20% increase isn't a minor adjustment and that a voltage of 1.3V is quite high, likely causing significant heat. He questions why P95 consistently draws 1.3V instead of the expected 1.185, mentioning concerns about P95 tests potentially drawing more current than intended.
A
AdamKoudy
10-28-2016, 11:10 AM #14

Dragos Manea explains the situation, noting that a 20% increase isn't a minor adjustment and that a voltage of 1.3V is quite high, likely causing significant heat. He questions why P95 consistently draws 1.3V instead of the expected 1.185, mentioning concerns about P95 tests potentially drawing more current than intended.

S
Seanpollak10
Member
64
10-29-2016, 09:14 PM
#15
Since the voltage at that level makes the motherboard think the CPU is stable, you can make a small adjustment and set the manual voltage to 1.29 if it works, then reduce it to 1.28 and so on until it becomes unstable. I don’t believe you should go beyond 4.2 at 1.28V, but you can try to be certain it won’t exceed that. My suggestion is to keep it at 4.2 and gradually lower the voltage to test its limits, starting from around 1.3V.
S
Seanpollak10
10-29-2016, 09:14 PM #15

Since the voltage at that level makes the motherboard think the CPU is stable, you can make a small adjustment and set the manual voltage to 1.29 if it works, then reduce it to 1.28 and so on until it becomes unstable. I don’t believe you should go beyond 4.2 at 1.28V, but you can try to be certain it won’t exceed that. My suggestion is to keep it at 4.2 and gradually lower the voltage to test its limits, starting from around 1.3V.

E
erin_33
Member
209
10-29-2016, 10:35 PM
#16
My 3570k with just a multiplier bump to 4.3 runs 30-31 at idle and 67-70 at p95 26.6 on a corsair h55 (similar to a hyper212 Evo). You'll just need to lower your voltages and there are a few options you can disable based on the BIOS you have.
E
erin_33
10-29-2016, 10:35 PM #16

My 3570k with just a multiplier bump to 4.3 runs 30-31 at idle and 67-70 at p95 26.6 on a corsair h55 (similar to a hyper212 Evo). You'll just need to lower your voltages and there are a few options you can disable based on the BIOS you have.

M
Mouton_Razer
Junior Member
11
10-30-2016, 08:07 AM
#17
Karadjgne shares his experience with a 3570k that has been boosted to 4.3. At idle it runs between 30-31 and at p95 it reaches 67-70 with a 26.6 boost on a Corsair H55, similar to a Hyper212 Evo. Adjusting voltages might help, but some settings could be turned off based on the BIOS. Every CPU is unique—don't compare them directly. I've noticed my CPU can hit 4.7 GHz at 1.25V, but it struggles to reach 4.4 at that voltage. Even with the same model or generation, performance varies between CPUs.
M
Mouton_Razer
10-30-2016, 08:07 AM #17

Karadjgne shares his experience with a 3570k that has been boosted to 4.3. At idle it runs between 30-31 and at p95 it reaches 67-70 with a 26.6 boost on a Corsair H55, similar to a Hyper212 Evo. Adjusting voltages might help, but some settings could be turned off based on the BIOS. Every CPU is unique—don't compare them directly. I've noticed my CPU can hit 4.7 GHz at 1.25V, but it struggles to reach 4.4 at that voltage. Even with the same model or generation, performance varies between CPUs.

Pages (2): Previous 1 2