I made a mistake with the ASUS TUF X470-PLUS gaming setup.

F5F Stay Refreshed Hardware Desktop I made a mistake with the ASUS TUF X470-PLUS gaming setup.

morlurne
Member

11-15-2018, 04:40 AM

I was attempting to use two monitors on my PC. I watched a tutorial and followed the steps. My system has a 3200G APU and an RX 580 GPU. I navigated to Advanced > Advanced/NB Configuration, enabled Changed IGFX Multi-Monitor, set UMA Frame Buffer Size to 3G, saved the settings, and restarted the computer. The PC started normally but no display appeared. I repeated the process and even changed the GPU's HDMI output to the motherboard, but nothing worked. Now I’m quite frustrated.

morlurne

11-15-2018, 04:40 AM #1

markopolo1996
Member

11-20-2018, 02:19 AM

https://neosmart.net/wiki/reset-bios-cmos/ There are several methods available, but it's quite straightforward.

markopolo1996

11-20-2018, 02:19 AM #2

https://neosmart.net/wiki/reset-bios-cmos/ There are several methods available, but it's quite straightforward.

MaddieStarr801
Member

230

11-25-2018, 12:27 PM

Disconnect the PC, remove the CMOS battery, turn it over, apply power, then reinstall the battery and reset the BIOS. Try again.

MaddieStarr801

11-25-2018, 12:27 PM #3

Disconnect the PC, remove the CMOS battery, turn it over, apply power, then reinstall the battery and reset the BIOS. Try again.

johnsrealm
Member

176

11-25-2018, 10:58 PM

I attempted that too, but it didn’t help. However, I managed to complete the CMOS pin adjustments while removing the battery, which finally resolved the issue. Thanks to both of you!

johnsrealm

11-25-2018, 10:58 PM #4

I attempted that too, but it didn’t help. However, I managed to complete the CMOS pin adjustments while removing the battery, which finally resolved the issue. Thanks to both of you!