I found a stripped screw in my computer case.
I found a stripped screw in my computer case.
You're facing a tight spot with the stripped screw on your Phantex Enthoo EVOLV build. Since the case is already installed, you'll need to carefully work around it. The CPU cooler and air blower are nearby, so plan your approach to avoid interference. If possible, look for alternative fasteners or consider using a small drill bit to gently loosen the screw before removing the case. Always double-check your alignment to prevent damaging components.
Have you looked at any standard methods? Trying a rubber band between the drivers and a screwdriver works. Can you insert something like an ignition wrench from the back to take out the stand-off? The case features a big opening on the rear side. If you manage to remove the stand-off, the stripped screw should come out easily with it. Then you might need more extreme steps—like carefully bonding a temporary piece and letting it harden before trying to pull it out. You could also drill it. Why haven’t you taken out the cooler for better access?
I mistakenly installed several oversized screws during the latest project and they became lodged. I tried forcing them in more firmly, which eventually caused the standoffs to detach. Later, I used pliers to extract the standoffs from the fasteners. Regrettably, I now understand that a "stripped screw" refers to damaging the top of the screw.
You're asking whether the head is entirely damaged in the loosening area or if the threads have been removed.