I connected four 8GB drives—two at 3600 RPM and two at 3200 RPM

F5F Stay Refreshed Hardware Desktop I connected four 8GB drives—two at 3600 RPM and two at 3200 RPM—all using Corsair Vengeance storage

I connected four 8GB drives—two at 3600 RPM and two at 3200 RPM—all using Corsair Vengeance storage

ForeverAthena
Member

215

05-19-2019, 02:50 AM

I tested a setup with four 8GB 3600 units and two 8GB 3200 units. The two 3200 sticks were Corsair Vengeance, while the other two 8GB sticks were Corsair Vengeance Pro RGB 3600. The system ran smoothly with this configuration. Any thoughts?

ForeverAthena

05-19-2019, 02:50 AM #1

jerome71580
Junior Member

05-21-2019, 01:24 AM

Did you turn on XMP, or is its speed limited? It’s fine if it’s running at 3600MTs. No need to be concerned. Thanks!

jerome71580

05-21-2019, 01:24 AM #2

Did you turn on XMP, or is its speed limited? It’s fine if it’s running at 3600MTs. No need to be concerned. Thanks!

Cheese1701
Junior Member

05-21-2019, 03:02 AM

XMP support activated successfully at 3600MHz.

Cheese1701

05-21-2019, 03:02 AM #3

XMP support activated successfully at 3600MHz.

hamzakhan19
Junior Member

05-21-2019, 03:32 AM

It's a fortunate outcome. As long as the 3200MHz components function correctly and the system remains steady, things will proceed without issues.

hamzakhan19

05-21-2019, 03:32 AM #4

It's a fortunate outcome. As long as the 3200MHz components function correctly and the system remains steady, things will proceed without issues.

DoriFire
Junior Member

05-26-2019, 06:51 PM

It functioned properly just one day before the computer shut down. I took out the 3200 sticks and now it works with two 3600 sticks.

DoriFire

05-26-2019, 06:51 PM #5

It functioned properly just one day before the computer shut down. I took out the 3200 sticks and now it works with two 3600 sticks.