F5F Stay Refreshed Power Users Overclocking I can overclock this build.

I can overclock this build.

I can overclock this build.

Pages (2): Previous 1 2
D
dutchwar666
Junior Member
Find
11
08-24-2021, 01:04 PM
#11
Hi, here are your updates... I’ll share the current readings if someone can confirm if everything is fine:
CPU: RAM: Temperature (After OC): 50°C; Temperature (Before OC): 32°C. The CPU temperature rose by 20°C from 4.0 to 4.6Ghz. It seems acceptable. I also increased the voltage by 0.250V to reach 600Ghz. I’m unsure if I should try higher frequencies with that setting. With 4.6Ghz, I don’t expect a significant temperature rise. I also changed the CPU BIOS from 200 to 230.

RAM: DRAM Frequency increased from 936.5 to 1076.8Mhz; NB Frequency from 2214.8 to 2538.5Mhz. But I’m not sure if these values are optimal, especially since my latency increased from CL9 to CL11. Other clocks also changed: tRP is now 11, tRAS 27, and tRAM 35. Are these acceptable? Or should I stick with 936.5Mhz and CL9?

I ran a stress test using Prime95 for an hour and it completed successfully. Then I tested with Heaven, which improved from 8 MIN FPS to 21 MIN FPS.

What do you think? What improvements could be made?

Thanks a lot!
Reply
Reply
D
dutchwar666
08-24-2021, 01:04 PM #11

Hi, here are your updates... I’ll share the current readings if someone can confirm if everything is fine:
CPU: RAM: Temperature (After OC): 50°C; Temperature (Before OC): 32°C. The CPU temperature rose by 20°C from 4.0 to 4.6Ghz. It seems acceptable. I also increased the voltage by 0.250V to reach 600Ghz. I’m unsure if I should try higher frequencies with that setting. With 4.6Ghz, I don’t expect a significant temperature rise. I also changed the CPU BIOS from 200 to 230.

RAM: DRAM Frequency increased from 936.5 to 1076.8Mhz; NB Frequency from 2214.8 to 2538.5Mhz. But I’m not sure if these values are optimal, especially since my latency increased from CL9 to CL11. Other clocks also changed: tRP is now 11, tRAS 27, and tRAM 35. Are these acceptable? Or should I stick with 936.5Mhz and CL9?

I ran a stress test using Prime95 for an hour and it completed successfully. Then I tested with Heaven, which improved from 8 MIN FPS to 21 MIN FPS.

What do you think? What improvements could be made?

Thanks a lot!

Reply
Reply
Pages (2): Previous 1 2