F5F Stay Refreshed Hardware Desktop Hynix C-DIE/CJR product line

Hynix C-DIE/CJR product line

Hynix C-DIE/CJR product line

S
Skywonder216
Member
171
06-29-2023, 04:08 PM
#1
I'm looking to gather details on Hynix's latest drama die. I want to collect as much information as possible to identify which kits are truly C-dies and not just disguised versions of others, similar to how the tech community analyzed Samsung B-dies. Thanks for your help!
S
Skywonder216
06-29-2023, 04:08 PM #1

I'm looking to gather details on Hynix's latest drama die. I want to collect as much information as possible to identify which kits are truly C-dies and not just disguised versions of others, similar to how the tech community analyzed Samsung B-dies. Thanks for your help!

S
supercube49
Member
172
06-29-2023, 04:58 PM
#2
Upgraded this after installing a 16GB DDR4-3600 CL17 Patriot Viper kit ($85 via Prime) featuring Hynix CJR ICs. It proved to be quite powerful with timing settings of 17-19-19-39-68. Screenshots capture what Thaiphoon shared, the key values I entered into the Ryzen DRAM calculator, and my final UEFI configuration on an ASRock B450 Fatal1ty ITX/AC board. All passed memtest86 at 16-19-20-36-56. Then I tried a 3733 CL16 with settings 16-20-20-36-56 (as per reports), which booted up fine. I didn’t stress test it at those speeds because the Infinity Fabric to DRAM frequency ratio seems to add extra latency, outweighing any performance boost. I might consider a FCLK overclock later, but that’s something for another time.
S
supercube49
06-29-2023, 04:58 PM #2

Upgraded this after installing a 16GB DDR4-3600 CL17 Patriot Viper kit ($85 via Prime) featuring Hynix CJR ICs. It proved to be quite powerful with timing settings of 17-19-19-39-68. Screenshots capture what Thaiphoon shared, the key values I entered into the Ryzen DRAM calculator, and my final UEFI configuration on an ASRock B450 Fatal1ty ITX/AC board. All passed memtest86 at 16-19-20-36-56. Then I tried a 3733 CL16 with settings 16-20-20-36-56 (as per reports), which booted up fine. I didn’t stress test it at those speeds because the Infinity Fabric to DRAM frequency ratio seems to add extra latency, outweighing any performance boost. I might consider a FCLK overclock later, but that’s something for another time.

H
heroboy17
Senior Member
528
07-13-2023, 09:36 AM
#3
Exciting possibility to observe additional testing soon. I’d appreciate seeing some tests at 1.45v with more precise timing. Just keep in mind that cjr doesn’t increase its performance proportionally with voltage.
H
heroboy17
07-13-2023, 09:36 AM #3

Exciting possibility to observe additional testing soon. I’d appreciate seeing some tests at 1.45v with more precise timing. Just keep in mind that cjr doesn’t increase its performance proportionally with voltage.

K
KYUUBl
Member
106
07-13-2023, 10:25 AM
#4
Working with 4GB HYNIX CJR sticks and Hyperx Fury
K
KYUUBl
07-13-2023, 10:25 AM #4

Working with 4GB HYNIX CJR sticks and Hyperx Fury

A
AllForAndroid
Junior Member
43
07-19-2023, 03:23 PM
#5
The 4Gbit CJR model isn't widely recognized, and most sources indicate it supports up to 8Gbit speeds.
A
AllForAndroid
07-19-2023, 03:23 PM #5

The 4Gbit CJR model isn't widely recognized, and most sources indicate it supports up to 8Gbit speeds.

H
Humhumm
Member
137
07-19-2023, 04:33 PM
#6
This document outlines the specifications for a 8Gb DDR4 memory module based on Rev.1.4. It includes details about the UDIMM format and technical parameters.
H
Humhumm
07-19-2023, 04:33 PM #6

This document outlines the specifications for a 8Gb DDR4 memory module based on Rev.1.4. It includes details about the UDIMM format and technical parameters.

S
Santa17
Junior Member
3
07-19-2023, 06:18 PM
#7
I could display your SPD output if you're interested.
S
Santa17
07-19-2023, 06:18 PM #7

I could display your SPD output if you're interested.

C
charlesturnier
Junior Member
37
07-19-2023, 07:23 PM
#8
I've had trouble getting my overclock working today. I think a setting on auto might have changed after I restarted this morning.
C
charlesturnier
07-19-2023, 07:23 PM #8

I've had trouble getting my overclock working today. I think a setting on auto might have changed after I restarted this morning.

A
alani2
Junior Member
3
07-20-2023, 01:30 AM
#9
Someone is asking about alternative CRH (Cad Bus) configurations that could outperform the recommendations from a DRAM calculator for Hynix systems.
A
alani2
07-20-2023, 01:30 AM #9

Someone is asking about alternative CRH (Cad Bus) configurations that could outperform the recommendations from a DRAM calculator for Hynix systems.