How to undervolt a 5900x on an ASUS MOBO?
How to undervolt a 5900x on an ASUS MOBO?
You're looking to lower the voltage settings on your 5900X via BIOS on your TUF Gaming X570 Pro (Wi-Fi). The current idle temps range from 50-60°C and under load hit around 75°C. You want a bit cooler idle for better comfort, while still maintaining stable performance. You've tried AI OC, which helped reduce heat but capped the clock speed at 4.2 GHz, affecting benchmark results. For ASUS motherboards, there isn't much guidance available, so you might need to explore forums or manufacturer support pages directly. Checking official ASUS documentation or reaching out to their community could provide specific steps tailored to your model.
Could you clarify what made you feel more at ease? Those readings don’t seem high enough for a CPU. If you’d shared them elsewhere, I’d expect you to have fine-tuned your setup.
You're correct, focusing on getting the best performance from your CPU without overheating is key. Undervolting can help balance power use, temperatures, and speed. Since you're new to BIOS settings, understanding how to adjust values manually will be useful. Plus, building this for the first time makes me anxious about overheating and damaging parts.
Your CPU is running well beyond the 80s, so it's not close to overheating. The temperatures are already quite good—I wouldn’t change anything unless the device starts giving warnings about overheating. I’d focus more on how the machine reports any issues rather than adjusting settings. Right now, everything looks fine.
You're looking to optimize your CPU's performance while maintaining stability. Running it stock is a solid starting point, but you can explore ways to push it further safely. The AI Suite setting your frequency at 4.2GHz already helps balance efficiency and performance. If you want higher sustained speeds without overheating, consider monitoring temperatures closely and adjusting power limits if needed. There are advanced BIOS settings or third-party tools that allow fine-tuning of voltage and frequency caps for better utilization. Always prioritize thermal management to avoid throttling.
I tested the CPU at its default configuration and didn’t worry much about overclocking or other adjustments unless you have a specific issue. Your machine is working well, and even a 5% speed increase wouldn’t be significant enough to be obvious in standard tests.