How to safely take out the R9 260 - Lenovo Gaming Desktop Troubleshooting [SOS] with photos
How to safely take out the R9 260 - Lenovo Gaming Desktop Troubleshooting [SOS] with photos
You're facing a tricky situation with your old gaming PC. Let's break down the options and see what might help.
First, it sounds like your graphics card is likely failing or not communicating properly. The fact that you can't get a display, even after reseating RAM and CMOS, suggests the GPU is probably dead or severely damaged. The recent crash and lack of boot into BIOS make it hard to diagnose further.
Option A suggests trying the IGPU again, but if the GPU is truly broken, this won't help.
Option B recommends replacing it with a new 1050 model—this could work if the issue is purely GPU-related.
Option C involves reseating the CPU or replacing it, which might be necessary if the power supply or other components are faulty.
Option D suggests scrapping the system and salvaging parts, which could be a last resort if you're certain it's just the GPU.
Option E advises taking it to a tech shop, which is practical if you need expert help.
Given your description, I’d recommend starting with Option B: replace the GPU with a compatible 1050 model. If that doesn’t work, move to Option C or E. Don’t ignore the fan issue—if it wasn’t spinning when you first noticed problems, it’s a strong clue.
You might also want to check the power connections and ensure your motherboard supports the new GPU. Let me know what you find!
Taking a GPU out of a PCIe slot usually doesn’t need removing screws beyond the one holding it to the case. Look for a tiny retention clip on the right side of the slot. Press it gently (toward the motherboard) to release the card, then you should be able to pull it out.
Alright thanks, I'll give it another go. I think the screw in the top left photo is connecting to the back of the case (where the ports are), but I'm not sure. I can't reach that with my smallest skrew driver. There seems to be a partial heatsink on the GPU in the way. But I don't see anything else that could be attached to the case. The black retention click should be that object in the top right photo, I'll give the GPU a bit more of a wiggle the next time I try it. I'll give you an update here when I do. Appreciate it!