F5F Stay Refreshed Power Users Overclocking How to achieve a consistent overclock of the AMD FX-4300 at 4.3 GHz

How to achieve a consistent overclock of the AMD FX-4300 at 4.3 GHz

How to achieve a consistent overclock of the AMD FX-4300 at 4.3 GHz

X
XxGoldenDrexX
Junior Member
29
04-09-2016, 09:15 AM
#1
Hey there! I recently changed the clock speed of my AMD FX-4300 to 3.9 GHz for boost, but I haven’t noticed much difference compared to 3.8 GHz in most games. I’m curious about the best stable overclock setting for this model. Here are some details about my system:

PC Specs:
AMD FX-4300
Gigabyte GA-970 G1 Gaming Rev 1.0 or 1.1 (exact revision not remembered)
Wraith Stock Cooler (from an old FX 6350)
HyperX BEAST 8GB DDR3 Dual Channel at 1866MHz
Gigabyte GTX 960 with OC WindForce X2 Edition for 4GB
Corsair RM850x

After adjusting BIOS settings—disabling C1E, C6 state, setting APM to Auto, and enabling Cool And Quiet Auto—I’m hoping to achieve a more stable boost. Any advice would be greatly appreciated!
X
XxGoldenDrexX
04-09-2016, 09:15 AM #1

Hey there! I recently changed the clock speed of my AMD FX-4300 to 3.9 GHz for boost, but I haven’t noticed much difference compared to 3.8 GHz in most games. I’m curious about the best stable overclock setting for this model. Here are some details about my system:

PC Specs:
AMD FX-4300
Gigabyte GA-970 G1 Gaming Rev 1.0 or 1.1 (exact revision not remembered)
Wraith Stock Cooler (from an old FX 6350)
HyperX BEAST 8GB DDR3 Dual Channel at 1866MHz
Gigabyte GTX 960 with OC WindForce X2 Edition for 4GB
Corsair RM850x

After adjusting BIOS settings—disabling C1E, C6 state, setting APM to Auto, and enabling Cool And Quiet Auto—I’m hoping to achieve a more stable boost. Any advice would be greatly appreciated!

A
ajure2009
Junior Member
20
04-09-2016, 06:09 PM
#2
these components can reach up to 5ghz, depending on the silicon situation, but a 4.8gHz should be sufficient in most cases
A
ajure2009
04-09-2016, 06:09 PM #2

these components can reach up to 5ghz, depending on the silicon situation, but a 4.8gHz should be sufficient in most cases

Y
yolosolohi48
Member
167
04-11-2016, 04:25 PM
#3
It's good to hear but stability depends on tuning. Upgrading to 4.8 GHz with the stock cooler might work, but going lower like 4.5 GHz could be risky. For optimal performance, consider the best FSB, CPU NB, HTL, DDR3 settings—such as voltages around 1.510V or adjusting CPU NB VID and voltage for a stable build.
Y
yolosolohi48
04-11-2016, 04:25 PM #3

It's good to hear but stability depends on tuning. Upgrading to 4.8 GHz with the stock cooler might work, but going lower like 4.5 GHz could be risky. For optimal performance, consider the best FSB, CPU NB, HTL, DDR3 settings—such as voltages around 1.510V or adjusting CPU NB VID and voltage for a stable build.

S
sacapatates
Posting Freak
843
04-11-2016, 11:40 PM
#4
the stock cooler can't manage it, the temps will get too high, just like with voltages... usually they increase for stability
S
sacapatates
04-11-2016, 11:40 PM #4

the stock cooler can't manage it, the temps will get too high, just like with voltages... usually they increase for stability

D
diamondgrl2004
Junior Member
8
04-12-2016, 01:21 AM
#5
I was certain that the stock cooler wouldn't cope with 4.8 GHz, though even the Wraith cooler offers slightly better thermal management than the old FX-4300. Still, I considered upgrading the FX-4300 to at least 4.3 GHz, which seems likely to provide stable performance without major problems. I’d really like to know the optimal BIOS/UEFI settings for achieving a stable 4.3 GHz OC. Thanks!
D
diamondgrl2004
04-12-2016, 01:21 AM #5

I was certain that the stock cooler wouldn't cope with 4.8 GHz, though even the Wraith cooler offers slightly better thermal management than the old FX-4300. Still, I considered upgrading the FX-4300 to at least 4.3 GHz, which seems likely to provide stable performance without major problems. I’d really like to know the optimal BIOS/UEFI settings for achieving a stable 4.3 GHz OC. Thanks!

P
PuniCrafter
Junior Member
23
04-17-2016, 10:48 AM
#6
The FX series CPUs consume a significant amount of Vcore during overclocking, which might indicate a temperature limit issue.
P
PuniCrafter
04-17-2016, 10:48 AM #6

The FX series CPUs consume a significant amount of Vcore during overclocking, which might indicate a temperature limit issue.

L
lucarich
Member
133
04-17-2016, 02:38 PM
#7
UPDATE: Somehow I finally managed to OC'ed my FX-4300 to 4.1 GHz by only increasing the CPU Clock Ratio and it went pretty well for the moment but the thing is that I'm not really sure how much it will be stable. I mean eventually it's stable but it's possible to encounter an unexpectedly BSOD just in any sec or minutes. For example, yesterday I've tested Shadow Warrior 2 (which I get it free on GOG) and I can say the game runs really smoothly but after 2 hours of gameplay, it just crashed to desktop which I don't know whether it's a just a bug or because I just OC'ed my CPU and that can cause the game to crash and exit itself to desktop which Shadow Warrior (2013) has a similar issue.
L
lucarich
04-17-2016, 02:38 PM #7

UPDATE: Somehow I finally managed to OC'ed my FX-4300 to 4.1 GHz by only increasing the CPU Clock Ratio and it went pretty well for the moment but the thing is that I'm not really sure how much it will be stable. I mean eventually it's stable but it's possible to encounter an unexpectedly BSOD just in any sec or minutes. For example, yesterday I've tested Shadow Warrior 2 (which I get it free on GOG) and I can say the game runs really smoothly but after 2 hours of gameplay, it just crashed to desktop which I don't know whether it's a just a bug or because I just OC'ed my CPU and that can cause the game to crash and exit itself to desktop which Shadow Warrior (2013) has a similar issue.

W
WickedStarfish
Junior Member
9
04-26-2016, 12:29 PM
#8
you can perform a cpu stress test to check stability; slightly increasing the voltage usually helps but raises temperatures.
W
WickedStarfish
04-26-2016, 12:29 PM #8

you can perform a cpu stress test to check stability; slightly increasing the voltage usually helps but raises temperatures.