High-quality outdoor Wi-Fi solution for reliable connectivity.
High-quality outdoor Wi-Fi solution for reliable connectivity.
I'm setting up some outdoor Wi-Fi spots in my yard and have a 1000Mbps connection. The sites are about 750 feet away from the router. I’m using two 300-foot Ethernet cables and planning to connect them with an extender, hoping the router can reach far enough. If not, I might need another extender and some extra cabling. I’m looking at this router because it’s POE powered and built for outdoor use.
First thing I want to check: am I missing anything from my list? Or should I pick different items? I’m thinking of plugging the outdoor router straight into my modem for better signal.
Second, how can I keep people from doing bad things on my network? If someone tries to access the Wi-Fi with bad intentions, it could be a problem. Even if someone gets the password, it should stay safe since you’ll have your own separate second router that isn’t shared.
Thanks! Here are some links for reference:
- [WiFi extender guide](https://www.amazon.com/gp/product/B0BZ3XXW6K)
- [Ethernet cable options](https://www.amazon.com/gp/product/B095XLYDTC)
- [Outdoor router picks](https://www.amazon.com/gp/product/B077QGTDLB)
- [Simple network security tips](https://www.amazon.com/gp/product/B085S1R5NX)
I’d likely find a more suitable solution with a Unifi or TP-Link AP connected to a pole. It would offer better performance than the links you mentioned. For security, a guest mode could restrict users to only the outside internet, preventing access to internal devices. Enabling this would help control what users can do online.
You require outdoor entry points instead of routers. Are you really relying on WiFi 6 at a camping location? How many guest devices should you anticipate connecting at once? I’ll take it for granted you’ll connect them to your main internet hub. Unless your connection arrives via coaxial cable, most broadband providers offer gateways (often combining modem, router, switch, and AP). If you own a cable modem, you’ll need a router between it and the rest of your setup. Secure your network with a robust password, enable strong encryption like WPA2-AES or WPA3, and restrict wireless range. If you’re offering public WiFi, anticipate attempts to breach security. Running guests in guest mode will keep them isolated from your main network. Also, routing all incoming traffic from these APs into a VLAN with firewall rules that block cross-VLAN access adds extra protection. How are you implementing this? Via a dedicated internet link? If the router shares the same modem as the APs, guests and you’ll remain on the same network unless firewall rules are applied.
For a straightforward installation, choose Ubiquiti. Purchase a suitable device, such as a dream machine, Dream Machine Pro SE, or a dream wall, then connect your access points. U6 mesh access points are designed for outdoor use. Configuration is simple—just plug in and click adopt.
Sorry everyone, I didn't catch the replies. My setup includes a fiber line entering my home, connected to the provider's modem—not a coaxial connection. I intend to deliver high-speed internet even if it's demanding for most users. With six other households streaming Netflix at night and all relying on my connection, I aim to ensure my experience remains positive while providing good service. Upgrading from 100 Mbps to 1 Gbps should improve satisfaction for everyone. It seems I'll install an access point and configure it in guest mode so guests can use the network without affecting my own. This was my goal when considering connecting a router directly to my main router.
I wasn't aware of this before. Is there a simple method to bypass it, such as going straight through?
No, even if there was, it would technically violate forum guidelines here. I’m not trying to be rude, but ISPs will definitely find out no matter what you do. You can tunnel, but the packets remain on their network—encrypted or not. I’ve seen this firsthand. They made a deal with us, but limited our weekly usage, so it wasn’t worth it. This was my first clue about why they charge business customers that way! It was around 2007.