F5F Stay Refreshed Hardware Desktop Help with an Error Code

Help with an Error Code

Help with an Error Code

D
DGY_DinoGamez
Member
191
06-03-2023, 09:16 AM
#1
Hey there, I understand how stressful this must be. Let me try to help you with the issue. It sounds like you're dealing with a fan error on your motherboard, specifically code 15. You mentioned trying everything else—BIOS reset, checking RAM, replacing CMOS—and still getting the problem. Have you tried clearing the CMOS again or checking for any loose connections? Also, make sure your power supply is stable and the fans are functioning properly. If you're unsure about any steps, it might be best to consult a professional or look up more detailed guides for your specific model. I really appreciate your patience and will do my best to assist further.
D
DGY_DinoGamez
06-03-2023, 09:16 AM #1

Hey there, I understand how stressful this must be. Let me try to help you with the issue. It sounds like you're dealing with a fan error on your motherboard, specifically code 15. You mentioned trying everything else—BIOS reset, checking RAM, replacing CMOS—and still getting the problem. Have you tried clearing the CMOS again or checking for any loose connections? Also, make sure your power supply is stable and the fans are functioning properly. If you're unsure about any steps, it might be best to consult a professional or look up more detailed guides for your specific model. I really appreciate your patience and will do my best to assist further.

S
simoncraft2015
Junior Member
12
06-03-2023, 10:45 AM
#2
System initialization at 15 begins. Consider these steps—clear CMOS thoroughly, remove battery, place jumper overnight while sleeping, ensure proper cooler mounting. If CPU pins are too tight, repositioning may help. Re-seat the CPU in the socket; sometimes this resolves issues. Update BIOS if available. For dual-board models, verify the BIOS switch. Try a backup setup. Good luck!
S
simoncraft2015
06-03-2023, 10:45 AM #2

System initialization at 15 begins. Consider these steps—clear CMOS thoroughly, remove battery, place jumper overnight while sleeping, ensure proper cooler mounting. If CPU pins are too tight, repositioning may help. Re-seat the CPU in the socket; sometimes this resolves issues. Update BIOS if available. For dual-board models, verify the BIOS switch. Try a backup setup. Good luck!

G
Greenmonstas
Member
62
06-09-2023, 12:39 PM
#3
Thank you for the feedback. I'll try to reposition the CPU and test the flashback again. Appreciate the extra troubleshooting ideas. Have a great day.
G
Greenmonstas
06-09-2023, 12:39 PM #3

Thank you for the feedback. I'll try to reposition the CPU and test the flashback again. Appreciate the extra troubleshooting ideas. Have a great day.