!HELP! Attempting to increase the clock speed of the g3258 to 4.2 GHz
!HELP! Attempting to increase the clock speed of the g3258 to 4.2 GHz
I only have the stock cooler, but I’m worried about the lifespan of the CPU. If I can push temperatures up to the 60s somewhere, I’ll try that. I’ll research other coolers to see what fits best. Thanks for your help!
Glad I could assist! Just a reminder there’s a best answer button if you’re interested... 😉
Let me share my current cooler with you. It’s an AMD CPU, possibly an Intel one too. It has a "wind tunnel"-style design to boost airflow. It’s affordable and gives solid performance. AMD CPUs usually run hotter than Intel, and I managed to overclock my 8-core FX-8150 from 3.6 GHz to 4.0 GHz while keeping it at 50 degrees! I could go even higher if I...
Why bother with a Pentium? You take a big risk for no noticeable improvement.
Why bother with a Pentium? You take unnecessary risks for little noticeable gains,
But every bit matters, don't you think?
Yes, it's dual-core, which is just another way to push performance even further.
Ariewok: Here's a post on someone who managed to clock your CPU at 4.5 GHz. They were using a good cooler, but judging by @CompuTronix's response, you should be all good! Hope this helps! Thanks! I will try the evo with 4.2!
Ariewok :
Ztdutxjgxgtu :
Why bother oc a pentium? You get very risky for un noticable performance,
Every bit counts though, right?
I mean yes, it's dual-core, but that's just more reason to squeeze out more performance.
Yea! It's a great value cpu!
Thanks! I plan to try the evo with 4.2!
Hold on a second... do you have another cooler available?
If yes and it's not in use, I'd exchange coolers. This might be what you need to reach even higher (if interested).
If not, wait until you buy another one. Just check how high you can get with the stock cooler. If your aim is just 4.2, the stock cooler should be sufficient. If not, or you're looking for something higher, then start exploring other options. Do your research too—there are likely better price-to-performance coolers for your needs.
Ariewok :
Thanks! I’ll try the evo with 4.2.
Hold up a second… do you have another cooler available?
If you do and it’s not in use, I’d exchange coolers. This might be what you need to reach even higher temps (if interested).
If not, wait until you buy another one. Just check how far you can go with the stock cooler. If your aim is just 4.2, it should be fine. But if you want more, start exploring other options. Do your research too—there are likely better price-to-performance coolers for your needs.
I only have the stock one; I’m worried about the CPU lifespan but if I can push temps up to the 60s somewhere, I’ll go higher.
I’ll look into coolers and find the best fit for me. Thanks for the helpful advice!
Atach :
I only have the stock cooler, im concerned about the lifespan of the cpu but if i can go higher with temps somewhere in the 60’s I will go a bit higher.
I will look more into the coolers and find what would work best for me. Thanks for the good answer!
Glad I could help! Not to push you, but just a reminder there's a best answer button if you're interested...
😉
Lemme link you my current cooler. I have an AMD CPU, but there's probably an Intel version too. It uses a "wind tunnel"-like design to maximize airflow. Pretty cheap, and great performance. AMD CPUs typically run hotter than Intel, and I was able to overclock my 8 core FX-8150 from 3.6 GHz to 4.0 GHz while remaining at 50 degrees! I could go a LOT higher if I wanted too, but I don't want to deal with bumping up voltage. Last time I tried my PC wouldn't post and I had to reset BIOS...
Also, while a good heatsink is important, good case fans and thermal compound are just as necessary. I link what I use too, near silent and extremely powerful.
The other less common things I do with my PC involve cutting out fans grills and leaving my side panel off. While pressure is important, I think having less material blocking airflow is a lot more important. Both of those add dust, but just clean your PC regularly and try to keep some compressed air cans around. I worry about accidentally getting a toe or something stuck in a fan, so I also used my friend's 3D printer to make some fan grills that maximize airflow. You likely don't have access to a 3D printer, so I'll link some good fan grills too.
I'm just happy to help someone else reach overclocking nirvana. With 8 cores, I don't really need to overclock much anyway.
Last notes: 1. Do your research besides my suggestions, something else might fit you better. I bought my PC used, with the heatsink already there. I don't have experience with other heatsinks, and they might be significantly better.
2. The Arctic Pro fans add anti-vibration and are cheaper, but can only be mounted one way.
3. Again, do your research, but this thermal paste is one of the most highly regarded non-conductive ones available.
4. Look for the best deals, ones linked are just first I found.
5. If you do have access to a 3D Printer, you can find some cool emblem designs on Thingiverse.
6.
Study from Puget Systems on fan grill design impacting airflow, noise, etc.
TL;DR: Wire is best in every category, with error factored in.
ZALMAN CNPS9500 Heatsink+Fan - $31.65 (Newegg)
Arctic MX-4 Thermal Compound 4G (5+ applications + lasts 8 years) - $6.68 (Amazon)
Arctic F8-F14 (80mm-140mm) PWM PST Case Fans - $5.99-8.99 (Arctic)
Arctic F8-F14 (80mm-140mm) PWM PST CO (continuous operation, lasts longer) Case Fans - $5.99-8.99 (Arctic)
Arctic F8-F12 (80mm-120mm) PRO PWM PST Case Fans - $6.99-8.99 (Arctic)
3D Print Fan Grills (search results) - 3D Print (Thingiverse)
Assorted Customizable Fan Grills (balance airflow and design with your preferences) - 3D Print (Thingiverse)
GardTec Steel Wire Fan Grill - $0.70 (Products For Automation)
Hope this helps! I had so much fun making this; think you've inspired me to do a guide on PC cooling...