F5F Stay Refreshed Hardware Desktop Help

Help

Help

R
Rosestwo
Junior Member
35
09-13-2021, 10:21 PM
#1
Turn your PC back on carefully. Check if the fans are spinning properly and ensure the monitor is receiving power. If everything seems fine, try resetting the system or checking for any stuck drivers.
R
Rosestwo
09-13-2021, 10:21 PM #1

Turn your PC back on carefully. Check if the fans are spinning properly and ensure the monitor is receiving power. If everything seems fine, try resetting the system or checking for any stuck drivers.

D
Dyriver
Member
145
09-30-2021, 10:17 PM
#2
Your video cable is connected to both your PC and monitor, and the monitor is also powered on.
D
Dyriver
09-30-2021, 10:17 PM #2

Your video cable is connected to both your PC and monitor, and the monitor is also powered on.

J
JoJoRageux
Member
153
10-03-2021, 08:35 PM
#3
New computer? Was it functional before? What are the specifications? Did the monitor connect to the correct port (not the mainboard, especially with a dedicated GPU)? Did you install one memory stick in one memory slot? Have you verified the correct memory slot? Have you attempted a CMOS reset? Did you wait a few minutes (around 2-3 minutes) to observe any changes? Does it power off by itself?
J
JoJoRageux
10-03-2021, 08:35 PM #3

New computer? Was it functional before? What are the specifications? Did the monitor connect to the correct port (not the mainboard, especially with a dedicated GPU)? Did you install one memory stick in one memory slot? Have you verified the correct memory slot? Have you attempted a CMOS reset? Did you wait a few minutes (around 2-3 minutes) to observe any changes? Does it power off by itself?

C
Carmel_Donut
Junior Member
10
10-05-2021, 09:50 PM
#4
The RAM appears functional. To refresh the CMOS, remove the battery for a few minutes or use the manufacturer’s reset procedure. If the BIOS still fails to appear, check connections, try a different power source, or consult the motherboard manual for specific steps.
C
Carmel_Donut
10-05-2021, 09:50 PM #4

The RAM appears functional. To refresh the CMOS, remove the battery for a few minutes or use the manufacturer’s reset procedure. If the BIOS still fails to appear, check connections, try a different power source, or consult the motherboard manual for specific steps.

G
gabriel37300
Junior Member
41
10-05-2021, 11:30 PM
#5
To reset the CMOS on your board, follow these steps carefully. Be aware that this will erase the BIOS settings, which means your memory and CPU overclock configurations will be lost, and possibly your boot sequence will change too. Since the DRAM indicator is lit, it seems like a RAM overclock issue might be present. If this resolves the problem: perform a memtest on your computer. If it doesn’t fix it: test one memory stick at a time in slot A2 (the second slot from the CPU side).
G
gabriel37300
10-05-2021, 11:30 PM #5

To reset the CMOS on your board, follow these steps carefully. Be aware that this will erase the BIOS settings, which means your memory and CPU overclock configurations will be lost, and possibly your boot sequence will change too. Since the DRAM indicator is lit, it seems like a RAM overclock issue might be present. If this resolves the problem: perform a memtest on your computer. If it doesn’t fix it: test one memory stick at a time in slot A2 (the second slot from the CPU side).

O
opticgunship
Posting Freak
815
10-06-2021, 05:24 AM
#6
I tried it already, but the computer isn’t starting.
O
opticgunship
10-06-2021, 05:24 AM #6

I tried it already, but the computer isn’t starting.

R
R_Piccini_360
Junior Member
37
10-06-2021, 09:48 AM
#7
Also regarding the memory issue—since it seems like the memory or slot might be failing, could you share another PC or motherboard? A friend with a DDR4 board would be helpful for testing.
R
R_Piccini_360
10-06-2021, 09:48 AM #7

Also regarding the memory issue—since it seems like the memory or slot might be failing, could you share another PC or motherboard? A friend with a DDR4 board would be helpful for testing.