F5F Stay Refreshed Hardware Desktop G.Skill Timing Aid - F4-3600C16Q-32GTZKK for Aorus Master - 9900K

G.Skill Timing Aid - F4-3600C16Q-32GTZKK for Aorus Master - 9900K

G.Skill Timing Aid - F4-3600C16Q-32GTZKK for Aorus Master - 9900K

J
J4im3x0
Member
Find
164
02-27-2018, 02:59 PM
#1
Hello, I recently upgraded to a higher-end 9900K on an Aorus Master Z390 with an 2080Ti processor, all powered via a water cooling loop running on a 1000W PSU. I haven’t started overclocking the 9900K yet. I merged my 2X16GB Micron RAM from my previous 8700K and MSI Z370A Pro build, but it hasn’t been smooth—had to overclock the Ballistix Tactical RAM to 3200 and tweak timings for a stable OS boot. Otherwise, normal startup should work without flashing or crashes. It’s now stable at 3200, though I’m still unsure how to proceed with further overclocking on the 2080Ti. I’m considering a new dual-RAM setup with B-Die modules aimed at higher speeds and lower timing, specifically the Trident Z F4-3600C16Q-32GTZKK model rated at 3600MHz (16-16-16-36). Anyone have a comprehensive guide or recommended timing charts for this RAM? I’d prefer to stick with VCCSA and VCCIO at 1.2V, but would appreciate more detailed timing suggestions. QVL support is available on the RAM, and I’m eager to align my approach with the Aorus Master’s capabilities. I’m relatively new to DDR4 tuning and have done a lot of research so far—just need a bit more guidance to compare my setup effectively. Thanks for your help!
Reply
Reply
J
J4im3x0
02-27-2018, 02:59 PM #1

Hello, I recently upgraded to a higher-end 9900K on an Aorus Master Z390 with an 2080Ti processor, all powered via a water cooling loop running on a 1000W PSU. I haven’t started overclocking the 9900K yet. I merged my 2X16GB Micron RAM from my previous 8700K and MSI Z370A Pro build, but it hasn’t been smooth—had to overclock the Ballistix Tactical RAM to 3200 and tweak timings for a stable OS boot. Otherwise, normal startup should work without flashing or crashes. It’s now stable at 3200, though I’m still unsure how to proceed with further overclocking on the 2080Ti. I’m considering a new dual-RAM setup with B-Die modules aimed at higher speeds and lower timing, specifically the Trident Z F4-3600C16Q-32GTZKK model rated at 3600MHz (16-16-16-36). Anyone have a comprehensive guide or recommended timing charts for this RAM? I’d prefer to stick with VCCSA and VCCIO at 1.2V, but would appreciate more detailed timing suggestions. QVL support is available on the RAM, and I’m eager to align my approach with the Aorus Master’s capabilities. I’m relatively new to DDR4 tuning and have done a lot of research so far—just need a bit more guidance to compare my setup effectively. Thanks for your help!

Reply
Reply