GPU overclocking display drivers malfunction [Urgent assistance needed]
GPU overclocking display drivers malfunction [Urgent assistance needed]
Hi, I'm looking to improve my FPS by overclocking my GPU. I've been adjusting settings such as GPU Offset between 80-200 and memory offset between 250-500, which gives a noticeable boost. However, after about 1 to 10 minutes, the display drivers stop working, and I suspect it's because the settings are underclocking or not fully utilizing the GPU power. This issue happens every 1 to 24 hours. I'm not very tech-savvy, but I've been trying to find a solution for a few years now.
You might be increasing it too much. When overclocking, it's best to take gradual steps and test before going further. Check this guide: http://www.hardocp.com/article/2012/04/0...4Y--vkrJhE
Begin with a minor GPU adjustment (leave the memory intact), then increase until it becomes unstable. After that, reduce it slightly and repeat the process. Memory is uncertain you can push it much further.
You might be increasing it too much. When overclocking, it's best to take gradual steps and test before going further. Check this guide: http://www.hardocp.com/article/2012/04/0...4Y--vkrJhE
Begin with a minor GPU adjustment (leave the memory intact), then increase until it becomes unstable. After that, reduce it slightly and repeat the process. Memory is uncertain you can push it much further.