GPU fan reaches maximum speed despite no other activity.

F5F Stay Refreshed Hardware Desktop GPU fan reaches maximum speed despite no other activity.

miknes123
Senior Member

646

11-24-2019, 07:20 PM

Hello y'all, hope you guys are having a great evening. Today I was trying to install a B450 Aorus Elite Motherboard that is Bios updated to support gen 3 Ryzen. When I installed a 3700x and all the corresponding headers/cables. The pc turned on but to no display signal. The GPU seems to be running its fan at 100%. I see a red led under DRAM, not quite so what to make of it. I am using corsair vengeance 3200mhz ram. I did check to see if all the pin connectors are connected and pushed down. Any insight would be much appreciated thanks!

miknes123

11-24-2019, 07:20 PM #1

IDarkHawk
Member

11-25-2019, 04:03 AM

Start by clearing the CMOS.

IDarkHawk

11-25-2019, 04:03 AM #2

Start by clearing the CMOS.

MrKryp
Senior Member

643

11-25-2019, 05:10 AM

I removed the motherboard from the setup. Is it possible to reset the BIOS using only the motherboard, without connecting it to the CPU or any other components? Should I include the CPU and other parts in the process?

MrKryp

11-25-2019, 05:10 AM #3

Smol_Desi
Junior Member

11-26-2019, 02:39 AM

Turn off the board and power supply. Jump the CMOS jumper for 30 seconds or remove the coin cell battery for 10 minutes. If that doesn't work, consult the manual for the board. It will indicate the memory slots and other details. Make sure everything remains connected when you reset the CMOS and power supply.

Smol_Desi

11-26-2019, 02:39 AM #4

malucopt
Junior Member

11-27-2019, 12:02 AM

The GPU operates at maximum speed due to high demand or system requirements.

malucopt

11-27-2019, 12:02 AM #5

The GPU operates at maximum speed due to high demand or system requirements.