Gigabyte Aorus paired with Ryzen 9 processor, RED CPU LED indicator, and core voltage concerns.
Gigabyte Aorus paired with Ryzen 9 processor, RED CPU LED indicator, and core voltage concerns.
Hello there, fellow users. I recently set up my newest PC with a Gigabyte Aorus X570 WiFi Pro + Ryzen 9 3900X. At first, everything worked fine after powering on. But once the system booted, it began shutting down unexpectedly. After researching online, I found information about CPU idle voltage issues and a temporary fix from Google. I adjusted the core voltage to 1.225V and everything functioned properly without any shutdowns. However, a recent Gigabyte update (F10a and AGESA 1.0.0.4) caused my motherboard to fail completely. Now it won’t power on at all—no POST message appears. I’m trying to use the F10 UEFI firmware with a custom core voltage setting of 1.225V, but it still doesn’t boot. I need help editing the UEFI firmware and setting default values. Gigabyte’s support isn’t helpful, and I don’t want any further assistance. I ordered the motherboard from Amazon and shipped it to another country, so I can’t just send it back. Please let me know if you can assist. Also, there’s a video demonstration here: https://www.youtube.com/watch?v=-dtEfmPVD4c. Thank you very much for your support!
Simply remove the CMOS or switch to the secondary BIOS using a switch. You can also clear the CMOS by locating a specific button or pin, or by draining the CMOS battery for about a minute or two.
It doesn't help. Tried reflash bios with qflash several times, cleared CMOS, removed battery even for hour. Also there is no secondary bios, motherboard with single bios. Mobo is aorus x570 wifi pro. Even no beeps if I start mobo without ram, gpu or cpu. Debug leds going like CPU -> DRAM -> GPU -> CPU -> shutdown.. :/ Need set CPU VCORE VOLTAGE to 1.225v. But no post and can't enter to BIOS. Problem with core voltage was before fixed by setting fixed value to 1.225V. But after last update F10(+agesa 1.0.0.4) motherboard completely stopped post. Gigabyte support is awful. Like parrot repeating try reflash using qflash plus. First time bought gigabyte, really disappointed.
It includes a secondary BIOS component. Gigabyte seldom produces boards without one. That’s essentially the solution for any BIOS concerns. Likely an RMA if you’re facing these problems.
Check the CPU on another board to determine if the problem lies elsewhere.