FX-6360 4.9Ghz unstability

BattleHack
Member

156

07-03-2025, 03:58 PM

I have successfully overclocked my FX-6350 to 4.9ghz @1.58v for stability in BIOS, but when trying to boot Windows it displays the Windows logo and loading icon, then freezes and crashes. I've adjusted voltage and speed settings without improvement. Could you suggest a solution?

BattleHack

07-03-2025, 03:58 PM #1

Klyner
Member

184

07-03-2025, 04:34 PM

reduce the OC.

Klyner

07-03-2025, 04:34 PM #2

reduce the OC.

TotoroGHG
Member

07-03-2025, 05:36 PM

The OC is too high for that configuration, and the voltage is really excessive.

TotoroGHG

07-03-2025, 05:36 PM #3

The OC is too high for that configuration, and the voltage is really excessive.

TermsOfYOLO
Member

07-03-2025, 08:22 PM

The OC is quite high for this configuration, and the voltage is unusually high. It was the smallest setting that gave stability. What size OC would you consider trying next?

TermsOfYOLO

07-03-2025, 08:22 PM #4

The OC is quite high for this configuration, and the voltage is unusually high. It was the smallest setting that gave stability. What size OC would you consider trying next?

TeenGirl33
Member

07-04-2025, 08:13 AM

If it only gets into the BIOS, it's far from stable.

TeenGirl33

07-04-2025, 08:13 AM #5

If it only gets into the BIOS, it's far from stable.

___Alex___
Member

109

07-12-2025, 04:12 AM

Safe stable voltage is significantly lower than 1.58v. I'm uncertain about AMD but I prefer to stay under 1.4v.

_Alex_

07-12-2025, 04:12 AM #6

Safe stable voltage is significantly lower than 1.58v. I'm uncertain about AMD but I prefer to stay under 1.4v.

Linouka
Junior Member

07-12-2025, 11:20 AM

So that's the nearest you came to stable at 4.9Ghz. You went all the way from +0.01 to there, so what would you suggest you do next?

Linouka

07-12-2025, 11:20 AM #7

So that's the nearest you came to stable at 4.9Ghz. You went all the way from +0.01 to there, so what would you suggest you do next?

MettaloCaft
Senior Member

396

07-12-2025, 04:32 PM

reduce the OC.

MettaloCaft

07-12-2025, 04:32 PM #8

reduce the OC.

Dude322111_
Junior Member

07-12-2025, 05:16 PM

This was the nearest result I achieved at 4.9Ghz. It went from +0.01 to the target. What suggestions do you have? Please read the previous discussions!

Dude322111_

07-12-2025, 05:16 PM #9

This was the nearest result I achieved at 4.9Ghz. It went from +0.01 to the target. What suggestions do you have? Please read the previous discussions!