FX 6300 Over clocking Troubble
FX 6300 Over clocking Troubble
I've attempted to overclock my FX-6300 multiple times without success; I can't reach 4.2 GHz without extremely high voltages (maximum stable at 4.2 GHz @ 1.44V). It has been running consistently for three months, but occasional crashes still occur. Access remains around 1.48V, which isn't stable either. With plenty of fans, a full AC unit, and an H80i, I'm convinced the issue lies with the chip. Some subpar silicon and bad luck seem to be the culprits. Should I go for an RMA or do you have any advice?
You own a Black Edition FX processor. It sits in the standard range for an average overclock using the FX 6300. Many individuals mistakenly claim things about FX processors all the time, such as "the FX 6300 and FX 6350 are identical devices, simply better clocked" and "there is no distinction between the FX 8320, FX 8350, FX 8370 or the FX 9xxx series—they just differ in factory specifications" (and in the FX 9xxx line, they vary in TDP). These views are incorrect, yet they continue to spread across these forums and other technology platforms.
Overclocking a CPU involves two aspects.
It’s not solely about the CPU itself, Matt. It also depends on the quality of the motherboard you possess.
With a budget motherboard, achieving significant overclocking is more challenging than with premium boards that might cost £100 or more.
The main chipset on the motherboard also plays a role, determining how much performance boost is possible from a CPU placed in its socket.
Cheap or low-end boards restrict both the overclocking potential and the quality of your power supply.
Additionally, the speed of your RAM affects overall performance.
For instance, placing a CPU on a £100 to £150 motherboard might yield around 4.5 Ghz at 1.35 volts.
With a reputable power supply and high-speed DDR3 RAM (2400Mhz), you can reach approximately 1Ghz or slightly higher.
For most users, an average FX CPU overclock typically reaches around 800Mhz.
With a solid motherboard, CPU cooling, power supply, and RAM in place, you can achieve over 1Ghz.
Overclocking a CPU involves two aspects. It's not solely about the CPU itself, but also the motherboard quality. With a budget motherboard, achieving high overclocks is more challenging compared to using premium boards that can cost around £100. The main chipset and the power supply unit also play significant roles in determining how much overclocking is possible. Cheap or low-end boards restrict both the CPU overclocks and the performance of the power supply.
How are you attempting to overclock? BIOS or a Windows program? FSB or CPU multiplier? Are you adjusting RAM speeds, North Bridge speeds, and voltages as well? Start by testing the CPU alone with just the multiplier and voltage settings in the BIOS. Also, what cooling solution are you using and what are the CPU and VRM temperatures?
How are you attempting to overclock? BIOS, a windows program, FSB or CPU multiplier? Are you adjusting RAM speeds, North Bridge speeds, and voltages as well? Start with the CPU alone using the multiplier and voltage settings in the BIOS. Also, what cooling solution are you using and what are the CPU and VRM temperatures?
utroz :
Matt_matrix :
utroz :
What methods are you using to try overclocking? BIOS, Windows software, FSB or CPU multiplier? Are you adjusting RAM speeds, North Bridge settings, and voltages as well? Start with just the CPU, using the multiplier and voltage in the BIOS. Also, what cooling solution are you employing and what temperatures are your CPU and VRM reaching?
The BIOS; I experimented with an AMD OverDrive and it managed to get my CPU running at 4.5 but it crashed, and I never touched it again... although that happened after many failed attempts with BIOS tuning.
It’s possible you’ve received a subpar CPU, which is often due to the silicon lottery nature of these components. There’s a reason certain CPUs are labeled 6300 instead of higher models like 8350, 8370, or 9XXX.
Yes, I’ve recognized that as an option and mentioned it in my post; thank you for sharing useful information. I was wondering if there’s anything missing or if I’m doing something incorrect...
It doesn't appear you're missing anything. I understand that a motherboard isn't ideal for overclocking, but 4.6-4.7Ghz should still work on a solid CPU.
-_- RMA; Rinse and repeat then...