Frame Time Issues
Frame Time Issues
It's also the motherboard if you're interested in viewing it again.
We should be able to get the memory functioning properly at DDR4-2666 without too many problems. Because XMP profiles don’t need extra voltage, it should be safe. In your BIOS, look for a memory section under the Ai Tweaker tab. First, enable XMP to apply the timings, then adjust the DRAM Frequency in the display and see if booting works. If that succeeds, you’ll likely see a 25% speed increase. If not, you may need to manually tweak the timings. The settings should be: CL/CAS at 17, RAS at 17, tRAS at 39, and tRC at 55. Once these are set correctly, it should work. If issues persist, consider increasing the voltage slightly, though that’s probably not required. If you’re unsure about the labels, take a photo and share it here.
I visited Ai tweaker and adjusted XMP settings, but it only supports XMP for the 2800MHz devices. Changing the frequency to 2666MHz would still leave other issues unresolved.
Adjusting the frequency to 2666 still requires manual overrides of the XMP setting. Expected timing will be marginally lower for tRAS and tRC, possibly introducing instability. Alternatively, fine-tuning the timing values could help maintain stability. You're free to modify these settings manually if needed—this approach was suggested simply to avoid confusion about the timing configuration.
In short, it varies based on what you mean by that. A key drawback of overclocking is the time needed to confirm results. For my RAM upgrades, I start with OCCT’s memory tests for the allowed duration in the free version. Then I use Prime95 with "Large FFTs" during the night. This approach has worked well for me. I increased my RAM from DDR4-3000 to DDR4-3333 without having to boost voltages. You can find more info here: https://www.ocbase.com/ and here: https://www.mersenne.org/download/
I had to face a tough battle in CS:GO to check the changes. It seemed to improve quite a bit. There are still some issues, but overall it felt much better.
I'm pleased to assist you. If your system meets the stability requirements, we could attempt actual memory overclocking. This involves raising voltages since the slower stick can't support DDR4-2800 at 1.2V as currently configured. Realistically, I'd aim for around DDR4-2933, which would represent a modest improvement of about 10%. A 25% jump to DDR4-3333 might be possible if circumstances are favorable. Considering the cost of RAM and the capability of modern Intel processors to handle high-speed memory, it would be more practical to upgrade yourself with a 2x8GB or even 2x16GB DDR4-3600 kit.
Yes, you can check the maximum supported RAM speeds. The CPU’s specifications list the highest frequency it can handle, so knowing its capabilities helps match compatible RAM. It’s possible to use faster RAM like 3600MHz instead of slower options, but ensure your motherboard supports it. For a 9700k processor, some high-speed modules may work if they meet the required standards.