Frame rates are dropping despite improvements.
Frame rates are dropping despite improvements.
I recently replaced my graphics card with a GIGABYTE GeForce GTX 1080:
https://www.gigabyte.com/Graphics-Card/G...ING-8GD#kf
Previously, using an MSI R9 380, my frame rates were satisfactory, exceeding those achieved with the older card; however, presently they've reverted to the levels I previously experienced with the R9 380. I don’t think temperature is a factor, as my processor reaches 50°C during gameplay and so does my graphics card. I observed that the fan noise has decreased since I initially saw improved frame rates. I verified that the fans are still operating at full speed, but the sound output is quieter. I suspect there might be a bottleneck issue, though my knowledge of this concept is limited.
My system specifications are as follows:
CPU: i7-4790
RAM: 24GB Ballistix
Motherboard: ASUS Q87M-E
1 TB HDD
PSU: 650 W Gold Plus
Hardware Insights:
Shektron:
If you increase the resolution on your new graphics card, what percentage of the GPU’s power is being used? If your frame rate isn't good enough, but the GPU isn’t operating at its maximum capacity while achieving that frame rate, then a processor with faster individual cores would be beneficial. First, verify you have the newest drivers for your graphics card and confirm that you haven’t unintentionally activated any frame rate limits within applications like the Nvidia Control Panel or the game itself.
What software do you utilize to monitor CPU and GPU temperatures and their activity levels?
I suspect my processor is limiting the performance of my graphics card; I employ CPUID HWMonitors for temperature readings, and as mentioned previously, when I attempt to use demanding settings, my frame rate decreases. It appears that…
Monitor your graphics card utilization while gaming, including the specific titles you’re playing and your display setup details. GPU usage is approximately 40%. The primary game being played is Fortnite with low settings and an extended resolution. The monitor refresh rate is 60Hz.
Raise your graphics preferences; why aren’t you playing with maximum detail? Furthermore, because your graphics card isn't operating at its full capacity, this indicates a problem with your processor restricting performance. Boosting the visual quality will increase GPU workload, however, your frames per second will remain approximately constant due to the CPU limiting the frame rate. Until the CPU is the primary constraint, your FPS won’t exceed your current level of performance. What frames per second do you achieve in Fortnite when you adjust the settings to at least high or even ultra?
Regarding your graphics settings: you should increase them – why are you running at a low level? The fact that your graphics card isn’t operating at its full capacity indicates a CPU bottleneck. Boosting the detail levels will raise GPU usage, however your frames per second will largely stay consistent due to the CPU restricting performance. As long as the CPU is the limiting factor, your FPS won't exceed what you currently experience. What frame rates do you achieve in Fortnite when you adjust settings to at least high or ultra?
It’s approximately the same; the issue is that I was receiving higher frame counts with the GPU and now it’s decreased. If this is indeed a bottleneck, would it necessitate upgrading my CPU? I initially believed an i7-4790 would be suitable for this configuration.
The specific frames per second achieved, both at reduced and elevated settings using the previous graphics card or the current one, were not detailed. Regarding the new GPU running on maximum settings, what is the resulting FPS? Achieving over 60 FPS ultimately isn’t beneficial considering your monitor's refresh rate of only 60 Hz. The i7-4790 processor does create a limitation, however, you are still obtaining more than 60 FPS; the 4790 is sufficient for that level at the very least. And indeed, this bottleneck indicates a requirement for a CPU with likely improved single-core performance, which is typically the primary constraint when determining frame rates. Nevertheless, upgrading isn’t valuable if you are already attaining more than 60 FPS, as your monitor will only display a maximum of 60 FPS.
Regarding your system:
You haven’t specified the precise frame rates you’re experiencing, specifically at lower or higher settings with both your previous and current graphics cards. When utilizing the new GPU and running on maximum settings, what average FPS are you achieving? A figure exceeding 60 frames per second wouldn't offer a noticeable improvement given that your monitor has a refresh rate of only 60 Hz. While the i7-4790 does contribute to a limitation, you should still be attaining over 60 FPS; the 4790 is sufficient for that level of performance at minimum. Indeed, this bottleneck indicates a need for a processor with potentially superior single-core speed, which often dictates the limiting factor when it comes to frame rates. However, an upgrade wouldn’t be beneficial if you're already consistently obtaining more than 60 FPS, as your display will only render up to that rate.
My typical frame counts are approximately 140 to 180, with high settings causing a drop below that range, averaging around 100 or less. This was similar when I initially received the new GPU; I previously recorded frame rates of 220+ frames. Although I possess only a 60 Hz monitor, in competitive games like Fortnite – a battle royale genre – it’s advantageous to have more FPS than anticipated; 60 FPS wouldn't perform optimally within Fortnite, even considering my monitor’s limitations.
If you increase the graphics setting on your new graphics card, what percentage of the GPU's power is being used? If your frame rate isn’t good enough, but the GPU isn’t operating at full capacity while achieving that frame rate, then a processor with faster individual cores would be beneficial. Be certain you are using the newest drivers for your GPU and verify you haven't unintentionally activated a frame rate restriction in any program (the Nvidia Control Panel, the tool you use to monitor GPU usage, or the game itself).
Which software do you employ to gauge CPU and GPU temperature and performance?
Regarding your system’s performance: If you increase the GPU setting to maximum, what percentage of its capacity is being utilized? If your frames per second (FPS) isn't acceptable despite not seeing complete GPU saturation, a CPU with improved single-core processing power is likely needed. First, verify that you are using the newest drivers for your graphics card and confirm you haven’t inadvertently enabled any frame rate limits within the Nvidia Control Panel or the game itself.
What software do you employ to monitor both CPU and GPU temperature and usage?
I suspect my processor is limiting the performance of the graphics card I'm utilizing. I use CPUID HWMonitor for temperature readings, and as previously mentioned, when I attempt to utilize higher settings, my FPS decreases. I believe the GPU is being used more intensely, though this hasn’t been confirmed; typically, the workload is divided equally between the CPU and GPU.