Five short beeps during initialization issue.
Five short beeps during initialization issue.
it really doesn't work, a 4pin in an 8pin socket won't function outside top-end CPUs. it should use an 8pin on premium processors, though the 4400 should be okay. ram compatibility might be an issue too. i've noticed some boards mention igpu isn't supported and suggest using a dedicated card. as a test, start the board without a cpu installed. ideally, it shouldn't produce any beep code. if it does, the problem likely lies with the cpu rather than the ram or graphics.
I understand it functions as long as your CPU is weak and not overclocked, but it remains outside specifications. If something fails and you're certain it's misconfigured, the first action should always be to verify its proper setup. Five short beeps typically indicate a CPU problem. (I can't view the video to confirm the duration)
they're quite lengthy, but flipping an 8-pin board can help—those eight pins are grouped into two rows. It seems it should function with a 4-pin connector. The purpose of the eight pins is to match power requirements for the lowest wire gauge that could fit, so it should work fine.
It was a tough experience once, but now everything checks out. I visited the place where I bought the memory, and they tested it with another of the same type. It works perfectly now. If you're seeing 5 long beeps on your gigabyte motherboard, it's likely the RAM issue. Thanks for the help!
Great to have discovered this discussion! It assisted me in fixing my persistent 5 long beeps problem with my Gigabyte GA-B150M-D3H M/B. << My Situation>> Five long beeps after restarting, repeating continuously. This happens with this configuration: - CUP + RAM (first setup). - CPU without RAM << Outcome>> A possible fix is re-seating the RAM. << Final Thoughts>> It seems likely either the CPU or RAM is faulty, as Gigabyte uses these 5 long beeps as a diagnostic code.